Merge branch 'spi-linus', remote-tracking branches 'misc/spi/bcm63xx'…

…, 'misc/spi/mcspi', 'misc/spi/mxs' and 'misc/spi/s3c64xx' into spi-next

Documentation/devicetree/bindings/spi/omap-spi.txt

@@ -6,7 +6,9 @@ Required properties:
   - "ti,omap4-spi" for OMAP4+.
 - ti,spi-num-cs : Number of chipselect supported  by the instance.
 - ti,hwmods: Name of the hwmod associated to the McSPI
-
+- ti,pindir-d0-in-d1-out: Select the D0 pin as input and D1 as
+			  output. The default is D0 as output and
+			  D1 as input.
 
 Example:
 

drivers/spi/spi-bcm63xx.c

@@ -36,7 +36,6 @@
 #include <bcm63xx_dev_spi.h>
 
 #define PFX		KBUILD_MODNAME
-#define DRV_VER		"0.1.2"
 
 struct bcm63xx_spi {
 	struct completion	done;
@@ -170,13 +169,6 @@ static int bcm63xx_spi_setup(struct spi_device *spi)
 		return -EINVAL;
 	}
 
-	ret = bcm63xx_spi_check_transfer(spi, NULL);
-	if (ret < 0) {
-		dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
-			spi->mode & ~MODEBITS);
-		return ret;
-	}
-
 	dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
 		__func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
 
@@ -441,8 +433,8 @@ static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
 		goto out_clk_disable;
 	}
 
-	dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n",
-		 r->start, irq, bs->fifo_size, DRV_VER);
+	dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d)\n",
+		 r->start, irq, bs->fifo_size);
 
 	return 0;
 
@@ -485,6 +477,8 @@ static int bcm63xx_spi_suspend(struct device *dev)
 			platform_get_drvdata(to_platform_device(dev));
 	struct bcm63xx_spi *bs = spi_master_get_devdata(master);
 
+	spi_master_suspend(master);
+
 	clk_disable(bs->clk);
 
 	return 0;
@@ -498,6 +492,8 @@ static int bcm63xx_spi_resume(struct device *dev)
 
 	clk_enable(bs->clk);
 
+	spi_master_resume(master);
+
 	return 0;
 }
 

drivers/spi/spi-mxs.c

@@ -323,6 +323,7 @@ static int mxs_spi_txrx_dma(struct mxs_spi *spi, int cs,
 	if (!ret) {
 		dev_err(ssp->dev, "DMA transfer timeout\n");
 		ret = -ETIMEDOUT;
+		dmaengine_terminate_all(ssp->dmach);
 		goto err_vmalloc;
 	}
 
@@ -480,7 +481,7 @@ static int mxs_spi_transfer_one(struct spi_master *master,
 		first = last = 0;
 	}
 
-	m->status = 0;
+	m->status = status;
 	spi_finalize_current_message(master);
 
 	return status;

drivers/spi/spi-omap2-mcspi.c

@@ -130,6 +130,7 @@ struct omap2_mcspi {
 	struct omap2_mcspi_dma	*dma_channels;
 	struct device		*dev;
 	struct omap2_mcspi_regs ctx;
+	unsigned int		pin_dir:1;
 };
 
 struct omap2_mcspi_cs {
@@ -765,8 +766,15 @@ static int omap2_mcspi_setup_transfer(struct spi_device *spi,
 	/* standard 4-wire master mode:  SCK, MOSI/out, MISO/in, nCS
 	 * REVISIT: this controller could support SPI_3WIRE mode.
 	 */
-	l &= ~(OMAP2_MCSPI_CHCONF_IS|OMAP2_MCSPI_CHCONF_DPE1);
-	l |= OMAP2_MCSPI_CHCONF_DPE0;
+	if (mcspi->pin_dir == MCSPI_PINDIR_D0_OUT_D1_IN) {
+		l &= ~OMAP2_MCSPI_CHCONF_IS;
+		l &= ~OMAP2_MCSPI_CHCONF_DPE1;
+		l |= OMAP2_MCSPI_CHCONF_DPE0;
+	} else {
+		l |= OMAP2_MCSPI_CHCONF_IS;
+		l |= OMAP2_MCSPI_CHCONF_DPE1;
+		l &= ~OMAP2_MCSPI_CHCONF_DPE0;
+	}
 
 	/* wordlength */
 	l &= ~OMAP2_MCSPI_CHCONF_WL_MASK;
@@ -1167,6 +1175,11 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev)
 	master->cleanup = omap2_mcspi_cleanup;
 	master->dev.of_node = node;
 
+	dev_set_drvdata(&pdev->dev, master);
+
+	mcspi = spi_master_get_devdata(master);
+	mcspi->master = master;
+
 	match = of_match_device(omap_mcspi_of_match, &pdev->dev);
 	if (match) {
 		u32 num_cs = 1; /* default number of chipselect */
@@ -1175,19 +1188,17 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev)
 		of_property_read_u32(node, "ti,spi-num-cs", &num_cs);
 		master->num_chipselect = num_cs;
 		master->bus_num = bus_num++;
+		if (of_get_property(node, "ti,pindir-d0-in-d1-out", NULL))
+			mcspi->pin_dir = MCSPI_PINDIR_D0_IN_D1_OUT;
 	} else {
 		pdata = pdev->dev.platform_data;
 		master->num_chipselect = pdata->num_cs;
 		if (pdev->id != -1)
 			master->bus_num = pdev->id;
+		mcspi->pin_dir = pdata->pin_dir;
 	}
 	regs_offset = pdata->regs_offset;
 
-	dev_set_drvdata(&pdev->dev, master);
-
-	mcspi = spi_master_get_devdata(master);
-	mcspi->master = master;
-
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		status = -ENODEV;

drivers/spi/spi-s3c64xx.c

@@ -516,7 +516,7 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 
 	/* Disable Clock */
 	if (sdd->port_conf->clk_from_cmu) {
-		clk_disable(sdd->src_clk);
+		clk_disable_unprepare(sdd->src_clk);
 	} else {
 		val = readl(regs + S3C64XX_SPI_CLK_CFG);
 		val &= ~S3C64XX_SPI_ENCLK_ENABLE;
@@ -564,7 +564,7 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 		/* There is half-multiplier before the SPI */
 		clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
 		/* Enable Clock */
-		clk_enable(sdd->src_clk);
+		clk_prepare_enable(sdd->src_clk);
 	} else {
 		/* Configure Clock */
 		val = readl(regs + S3C64XX_SPI_CLK_CFG);
@@ -1302,7 +1302,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 		goto err3;
 	}
 
-	if (clk_enable(sdd->clk)) {
+	if (clk_prepare_enable(sdd->clk)) {
 		dev_err(&pdev->dev, "Couldn't enable clock 'spi'\n");
 		ret = -EBUSY;
 		goto err4;
@@ -1317,7 +1317,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 		goto err5;
 	}
 
-	if (clk_enable(sdd->src_clk)) {
+	if (clk_prepare_enable(sdd->src_clk)) {
 		dev_err(&pdev->dev, "Couldn't enable clock '%s'\n", clk_name);
 		ret = -EBUSY;
 		goto err6;
@@ -1361,11 +1361,11 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev)
 err8:
 	free_irq(irq, sdd);
 err7:
-	clk_disable(sdd->src_clk);
+	clk_disable_unprepare(sdd->src_clk);
 err6:
 	clk_put(sdd->src_clk);
 err5:
-	clk_disable(sdd->clk);
+	clk_disable_unprepare(sdd->clk);
 err4:
 	clk_put(sdd->clk);
 err3:
@@ -1393,10 +1393,10 @@ static int s3c64xx_spi_remove(struct platform_device *pdev)
 
 	free_irq(platform_get_irq(pdev, 0), sdd);
 
-	clk_disable(sdd->src_clk);
+	clk_disable_unprepare(sdd->src_clk);
 	clk_put(sdd->src_clk);
 
-	clk_disable(sdd->clk);
+	clk_disable_unprepare(sdd->clk);
 	clk_put(sdd->clk);
 
 	if (!sdd->cntrlr_info->cfg_gpio && pdev->dev.of_node)
@@ -1417,8 +1417,8 @@ static int s3c64xx_spi_suspend(struct device *dev)
 	spi_master_suspend(master);
 
 	/* Disable the clock */
-	clk_disable(sdd->src_clk);
-	clk_disable(sdd->clk);
+	clk_disable_unprepare(sdd->src_clk);
+	clk_disable_unprepare(sdd->clk);
 
 	if (!sdd->cntrlr_info->cfg_gpio && dev->of_node)
 		s3c64xx_spi_dt_gpio_free(sdd);
@@ -1440,8 +1440,8 @@ static int s3c64xx_spi_resume(struct device *dev)
 		sci->cfg_gpio();
 
 	/* Enable the clock */
-	clk_enable(sdd->src_clk);
-	clk_enable(sdd->clk);
+	clk_prepare_enable(sdd->src_clk);
+	clk_prepare_enable(sdd->clk);
 
 	s3c64xx_spi_hwinit(sdd, sdd->port_id);
 
@@ -1457,8 +1457,8 @@ static int s3c64xx_spi_runtime_suspend(struct device *dev)
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
 
-	clk_disable(sdd->clk);
-	clk_disable(sdd->src_clk);
+	clk_disable_unprepare(sdd->clk);
+	clk_disable_unprepare(sdd->src_clk);
 
 	return 0;
 }
@@ -1468,8 +1468,8 @@ static int s3c64xx_spi_runtime_resume(struct device *dev)
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct s3c64xx_spi_driver_data *sdd = spi_master_get_devdata(master);
 
-	clk_enable(sdd->src_clk);
-	clk_enable(sdd->clk);
+	clk_prepare_enable(sdd->src_clk);
+	clk_prepare_enable(sdd->clk);
 
 	return 0;
 }

include/linux/platform_data/spi-omap2-mcspi.h

@@ -7,9 +7,13 @@
 
 #define OMAP4_MCSPI_REG_OFFSET 0x100
 
+#define MCSPI_PINDIR_D0_OUT_D1_IN	0
+#define MCSPI_PINDIR_D0_IN_D1_OUT	1
+
 struct omap2_mcspi_platform_config {
 	unsigned short	num_cs;
 	unsigned int regs_offset;
+	unsigned int pin_dir:1;
 };
 
 struct omap2_mcspi_dev_attr {