---

yaml
---
r: 224955
b: refs/heads/master
c: cf78f8e
h: refs/heads/master
i:
  224953: b0df854
  224951: 74b9959
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c39d35ebffeea5996a6f8fd8430fae9acfb8aeaf
+refs/heads/master: cf78f8ee3de7d8d5b47d371c95716d0e4facf1c4

trunk/Documentation/DocBook/80211.tmpl

@@ -146,6 +146,7 @@
 !Finclude/net/cfg80211.h cfg80211_rx_mgmt
 !Finclude/net/cfg80211.h cfg80211_mgmt_tx_status
 !Finclude/net/cfg80211.h cfg80211_cqm_rssi_notify
+!Finclude/net/cfg80211.h cfg80211_cqm_pktloss_notify
 !Finclude/net/cfg80211.h cfg80211_michael_mic_failure
       </chapter>
       <chapter>
@@ -332,10 +333,16 @@
           <title>functions/definitions</title>
 !Finclude/net/mac80211.h ieee80211_rx_status
 !Finclude/net/mac80211.h mac80211_rx_flags
+!Finclude/net/mac80211.h mac80211_tx_control_flags
+!Finclude/net/mac80211.h mac80211_rate_control_flags
+!Finclude/net/mac80211.h ieee80211_tx_rate
 !Finclude/net/mac80211.h ieee80211_tx_info
+!Finclude/net/mac80211.h ieee80211_tx_info_clear_status
 !Finclude/net/mac80211.h ieee80211_rx
+!Finclude/net/mac80211.h ieee80211_rx_ni
 !Finclude/net/mac80211.h ieee80211_rx_irqsafe
 !Finclude/net/mac80211.h ieee80211_tx_status
+!Finclude/net/mac80211.h ieee80211_tx_status_ni
 !Finclude/net/mac80211.h ieee80211_tx_status_irqsafe
 !Finclude/net/mac80211.h ieee80211_rts_get
 !Finclude/net/mac80211.h ieee80211_rts_duration
@@ -346,6 +353,7 @@
 !Finclude/net/mac80211.h ieee80211_stop_queue
 !Finclude/net/mac80211.h ieee80211_wake_queues
 !Finclude/net/mac80211.h ieee80211_stop_queues
+!Finclude/net/mac80211.h ieee80211_queue_stopped
         </sect1>
       </chapter>
 
@@ -354,6 +362,13 @@
 !Pinclude/net/mac80211.h Frame filtering
 !Finclude/net/mac80211.h ieee80211_filter_flags
       </chapter>
+
+      <chapter id="workqueue">
+        <title>The mac80211 workqueue</title>
+!Pinclude/net/mac80211.h mac80211 workqueue
+!Finclude/net/mac80211.h ieee80211_queue_work
+!Finclude/net/mac80211.h ieee80211_queue_delayed_work
+      </chapter>
     </part>
 
     <part id="advanced">
@@ -374,6 +389,9 @@
 !Finclude/net/mac80211.h set_key_cmd
 !Finclude/net/mac80211.h ieee80211_key_conf
 !Finclude/net/mac80211.h ieee80211_key_flags
+!Finclude/net/mac80211.h ieee80211_tkip_key_type
+!Finclude/net/mac80211.h ieee80211_get_tkip_key
+!Finclude/net/mac80211.h ieee80211_key_removed
       </chapter>
 
       <chapter id="powersave">
@@ -417,13 +435,47 @@
           supported by mac80211, add notes about supporting hw crypto
           with it.
         </para>
+!Finclude/net/mac80211.h ieee80211_iterate_active_interfaces
+!Finclude/net/mac80211.h ieee80211_iterate_active_interfaces_atomic
+      </chapter>
+
+      <chapter id="station-handling">
+        <title>Station handling</title>
+        <para>TODO</para>
+!Finclude/net/mac80211.h ieee80211_sta
+!Finclude/net/mac80211.h sta_notify_cmd
+!Finclude/net/mac80211.h ieee80211_find_sta
+!Finclude/net/mac80211.h ieee80211_find_sta_by_ifaddr
+!Finclude/net/mac80211.h ieee80211_sta_block_awake
       </chapter>
 
       <chapter id="hardware-scan-offload">
         <title>Hardware scan offload</title>
         <para>TBD</para>
 !Finclude/net/mac80211.h ieee80211_scan_completed
       </chapter>
+
+      <chapter id="aggregation">
+        <title>Aggregation</title>
+        <sect1>
+          <title>TX A-MPDU aggregation</title>
+!Pnet/mac80211/agg-tx.c TX A-MPDU aggregation
+!Cnet/mac80211/agg-tx.c
+        </sect1>
+        <sect1>
+          <title>RX A-MPDU aggregation</title>
+!Pnet/mac80211/agg-rx.c RX A-MPDU aggregation
+!Cnet/mac80211/agg-rx.c
+        </sect1>
+!Finclude/net/mac80211.h ieee80211_ampdu_mlme_action
+      </chapter>
+
+      <chapter id="smps">
+        <title>Spatial Multiplexing Powersave (SMPS)</title>
+!Pinclude/net/mac80211.h Spatial multiplexing power save
+!Finclude/net/mac80211.h ieee80211_request_smps
+!Finclude/net/mac80211.h ieee80211_smps_mode
+      </chapter>
     </part>
 
     <part id="rate-control">
@@ -435,9 +487,16 @@
          interface and how it relates to mac80211 and drivers.
         </para>
       </partintro>
-      <chapter id="dummy">
-        <title>dummy chapter</title>
+      <chapter id="ratecontrol-api">
+        <title>Rate Control API</title>
         <para>TBD</para>
+!Finclude/net/mac80211.h ieee80211_start_tx_ba_session
+!Finclude/net/mac80211.h ieee80211_start_tx_ba_cb_irqsafe
+!Finclude/net/mac80211.h ieee80211_stop_tx_ba_session
+!Finclude/net/mac80211.h ieee80211_stop_tx_ba_cb_irqsafe
+!Finclude/net/mac80211.h rate_control_changed
+!Finclude/net/mac80211.h ieee80211_tx_rate_control
+!Finclude/net/mac80211.h rate_control_send_low
       </chapter>
     </part>
 
@@ -485,6 +544,13 @@
         </sect1>
       </chapter>
 
+      <chapter id="aggregation-internals">
+        <title>Aggregation</title>
+!Fnet/mac80211/sta_info.h sta_ampdu_mlme
+!Fnet/mac80211/sta_info.h tid_ampdu_tx
+!Fnet/mac80211/sta_info.h tid_ampdu_rx
+      </chapter>
+
       <chapter id="synchronisation">
         <title>Synchronisation</title>
         <para>TBD</para>

trunk/Documentation/networking/dccp.txt

@@ -47,6 +47,26 @@ http://linux-net.osdl.org/index.php/DCCP_Testing#Experimental_DCCP_source_tree
 
 Socket options
 ==============
+DCCP_SOCKOPT_QPOLICY_ID sets the dequeuing policy for outgoing packets. It takes
+a policy ID as argument and can only be set before the connection (i.e. changes
+during an established connection are not supported). Currently, two policies are
+defined: the "simple" policy (DCCPQ_POLICY_SIMPLE), which does nothing special,
+and a priority-based variant (DCCPQ_POLICY_PRIO). The latter allows to pass an
+u32 priority value as ancillary data to sendmsg(), where higher numbers indicate
+a higher packet priority (similar to SO_PRIORITY). This ancillary data needs to
+be formatted using a cmsg(3) message header filled in as follows:
+	cmsg->cmsg_level = SOL_DCCP;
+	cmsg->cmsg_type	 = DCCP_SCM_PRIORITY;
+	cmsg->cmsg_len	 = CMSG_LEN(sizeof(uint32_t));	/* or CMSG_LEN(4) */
+
+DCCP_SOCKOPT_QPOLICY_TXQLEN sets the maximum length of the output queue. A zero
+value is always interpreted as unbounded queue length. If different from zero,
+the interpretation of this parameter depends on the current dequeuing policy
+(see above): the "simple" policy will enforce a fixed queue size by returning
+EAGAIN, whereas the "prio" policy enforces a fixed queue length by dropping the
+lowest-priority packet first. The default value for this parameter is
+initialised from /proc/sys/net/dccp/default/tx_qlen.
+
 DCCP_SOCKOPT_SERVICE sets the service. The specification mandates use of
 service codes (RFC 4340, sec. 8.1.2); if this socket option is not set,
 the socket will fall back to 0 (which means that no meaningful service code

trunk/Documentation/networking/ip-sysctl.txt

@@ -144,6 +144,7 @@ tcp_adv_win_scale - INTEGER
 	Count buffering overhead as bytes/2^tcp_adv_win_scale
 	(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
 	if it is <= 0.
+	Possible values are [-31, 31], inclusive.
 	Default: 2
 
 tcp_allowed_congestion_control - STRING

trunk/MAINTAINERS

@@ -1359,7 +1359,7 @@ F:	include/net/bluetooth/
 
 BONDING DRIVER
 M:	Jay Vosburgh <fubar@us.ibm.com>
-L:	bonding-devel@lists.sourceforge.net
+L:	netdev@vger.kernel.org
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
 F:	drivers/net/bonding/

trunk/drivers/atm/lanai.c

@@ -2241,11 +2241,8 @@ static int __devinit lanai_dev_open(struct atm_dev *atmdev)
 	memcpy(atmdev->esi, eeprom_mac(lanai), ESI_LEN);
 	lanai_timed_poll_start(lanai);
 	printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u "
-	    "(%02X-%02X-%02X-%02X-%02X-%02X)\n", lanai->number,
-	    (int) lanai->pci->revision, (unsigned long) lanai->base,
-	    lanai->pci->irq,
-	    atmdev->esi[0], atmdev->esi[1], atmdev->esi[2],
-	    atmdev->esi[3], atmdev->esi[4], atmdev->esi[5]);
+		"(%pMF)\n", lanai->number, (int) lanai->pci->revision,
+		(unsigned long) lanai->base, lanai->pci->irq, atmdev->esi);
 	printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), "
 	    "board_rev=%d\n", lanai->number,
 	    lanai->type==lanai2 ? "2" : "HB", (unsigned int) lanai->serialno,

trunk/drivers/bluetooth/ath3k.c

@@ -35,6 +35,10 @@
 static struct usb_device_id ath3k_table[] = {
 	/* Atheros AR3011 */
 	{ USB_DEVICE(0x0CF3, 0x3000) },
+
+	/* Atheros AR3011 with sflash firmware*/
+	{ USB_DEVICE(0x0CF3, 0x3002) },
+
 	{ }	/* Terminating entry */
 };
 

trunk/drivers/bluetooth/btusb.c

@@ -99,6 +99,9 @@ static struct usb_device_id blacklist_table[] = {
 	/* Broadcom BCM2033 without firmware */
 	{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
 
+	/* Atheros 3011 with sflash firmware */
+	{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+
 	/* Broadcom BCM2035 */
 	{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
 	{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
@@ -239,7 +242,8 @@ static void btusb_intr_complete(struct urb *urb)
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
-		BT_ERR("%s urb %p failed to resubmit (%d)",
+		if (err != -EPERM)
+			BT_ERR("%s urb %p failed to resubmit (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
 	}
@@ -323,7 +327,8 @@ static void btusb_bulk_complete(struct urb *urb)
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
-		BT_ERR("%s urb %p failed to resubmit (%d)",
+		if (err != -EPERM)
+			BT_ERR("%s urb %p failed to resubmit (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
 	}
@@ -412,7 +417,8 @@ static void btusb_isoc_complete(struct urb *urb)
 
 	err = usb_submit_urb(urb, GFP_ATOMIC);
 	if (err < 0) {
-		BT_ERR("%s urb %p failed to resubmit (%d)",
+		if (err != -EPERM)
+			BT_ERR("%s urb %p failed to resubmit (%d)",
 						hdev->name, urb, -err);
 		usb_unanchor_urb(urb);
 	}

trunk/drivers/isdn/hisax/config.c

@@ -1917,7 +1917,7 @@ static void EChannel_proc_rcv(struct hisax_d_if *d_if)
 #ifdef CONFIG_PCI
 #include <linux/pci.h>
 
-static struct pci_device_id hisax_pci_tbl[] __devinitdata = {
+static struct pci_device_id hisax_pci_tbl[] __devinitdata __used = {
 #ifdef CONFIG_HISAX_FRITZPCI
 	{PCI_VDEVICE(AVM,      PCI_DEVICE_ID_AVM_A1)			},
 #endif

trunk/drivers/isdn/icn/icn.c

@@ -1627,7 +1627,7 @@ __setup("icn=", icn_setup);
 static int __init icn_init(void)
 {
 	char *p;
-	char rev[10];
+	char rev[20];
 
 	memset(&dev, 0, sizeof(icn_dev));
 	dev.memaddr = (membase & 0x0ffc000);
@@ -1637,9 +1637,10 @@ static int __init icn_init(void)
 	spin_lock_init(&dev.devlock);
 
 	if ((p = strchr(revision, ':'))) {
-		strcpy(rev, p + 1);
+		strncpy(rev, p + 1, 20);
 		p = strchr(rev, '$');
-		*p = 0;
+		if (p)
+			*p = 0;
 	} else
 		strcpy(rev, " ??? ");
 	printk(KERN_NOTICE "ICN-ISDN-driver Rev%smem=0x%08lx\n", rev,

trunk/drivers/net/Kconfig

@@ -2543,10 +2543,10 @@ config PCH_GBE
 	depends on PCI
 	select MII
 	---help---
-	  This is a gigabit ethernet driver for Topcliff PCH.
-	  Topcliff PCH is the platform controller hub that is used in Intel's
+	  This is a gigabit ethernet driver for EG20T PCH.
+	  EG20T PCH is the platform controller hub that is used in Intel's
 	  general embedded platform.
-	  Topcliff PCH has Gigabit Ethernet interface.
+	  EG20T PCH has Gigabit Ethernet interface.
 	  Using this interface, it is able to access system devices connected
 	  to Gigabit Ethernet.
 	  This driver enables Gigabit Ethernet function.

trunk/drivers/net/arm/am79c961a.c

@@ -340,14 +340,6 @@ am79c961_close(struct net_device *dev)
 	return 0;
 }
 
-/*
- * Get the current statistics.
- */
-static struct net_device_stats *am79c961_getstats (struct net_device *dev)
-{
-	return &dev->stats;
-}
-
 static void am79c961_mc_hash(char *addr, unsigned short *hash)
 {
 	if (addr[0] & 0x01) {
@@ -665,7 +657,6 @@ static const struct net_device_ops am79c961_netdev_ops = {
 	.ndo_open		= am79c961_open,
 	.ndo_stop		= am79c961_close,
 	.ndo_start_xmit		= am79c961_sendpacket,
-	.ndo_get_stats		= am79c961_getstats,
 	.ndo_set_multicast_list	= am79c961_setmulticastlist,
 	.ndo_tx_timeout		= am79c961_timeout,
 	.ndo_validate_addr	= eth_validate_addr,

trunk/drivers/net/atl1c/atl1c_hw.c

@@ -82,7 +82,7 @@ static int atl1c_get_permanent_address(struct atl1c_hw *hw)
 	addr[0] = addr[1] = 0;
 	AT_READ_REG(hw, REG_OTP_CTRL, &otp_ctrl_data);
 	if (atl1c_check_eeprom_exist(hw)) {
-		if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c_b) {
+		if (hw->nic_type == athr_l1c || hw->nic_type == athr_l2c) {
 			/* Enable OTP CLK */
 			if (!(otp_ctrl_data & OTP_CTRL_CLK_EN)) {
 				otp_ctrl_data |= OTP_CTRL_CLK_EN;

trunk/drivers/net/au1000_eth.c

@@ -155,10 +155,10 @@ static void au1000_enable_mac(struct net_device *dev, int force_reset)
 	spin_lock_irqsave(&aup->lock, flags);
 
 	if (force_reset || (!aup->mac_enabled)) {
-		writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+		writel(MAC_EN_CLOCK_ENABLE, aup->enable);
 		au_sync_delay(2);
 		writel((MAC_EN_RESET0 | MAC_EN_RESET1 | MAC_EN_RESET2
-				| MAC_EN_CLOCK_ENABLE), &aup->enable);
+				| MAC_EN_CLOCK_ENABLE), aup->enable);
 		au_sync_delay(2);
 
 		aup->mac_enabled = 1;
@@ -503,9 +503,9 @@ static void au1000_reset_mac_unlocked(struct net_device *dev)
 
 	au1000_hard_stop(dev);
 
-	writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+	writel(MAC_EN_CLOCK_ENABLE, aup->enable);
 	au_sync_delay(2);
-	writel(0, &aup->enable);
+	writel(0, aup->enable);
 	au_sync_delay(2);
 
 	aup->tx_full = 0;
@@ -1119,7 +1119,7 @@ static int __devinit au1000_probe(struct platform_device *pdev)
 	/* set a random MAC now in case platform_data doesn't provide one */
 	random_ether_addr(dev->dev_addr);
 
-	writel(0, &aup->enable);
+	writel(0, aup->enable);
 	aup->mac_enabled = 0;
 
 	pd = pdev->dev.platform_data;

trunk/drivers/net/b44.c

@@ -381,11 +381,11 @@ static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote)
 	__b44_set_flow_ctrl(bp, pause_enab);
 }
 
-#ifdef SSB_DRIVER_MIPS
-extern char *nvram_get(char *name);
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
 static void b44_wap54g10_workaround(struct b44 *bp)
 {
-	const char *str;
+	char buf[20];
 	u32 val;
 	int err;
 
@@ -394,10 +394,9 @@ static void b44_wap54g10_workaround(struct b44 *bp)
 	 * see https://dev.openwrt.org/ticket/146
 	 * check and reset bit "isolate"
 	 */
-	str = nvram_get("boardnum");
-	if (!str)
+	if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
 		return;
-	if (simple_strtoul(str, NULL, 0) == 2) {
+	if (simple_strtoul(buf, NULL, 0) == 2) {
 		err = __b44_readphy(bp, 0, MII_BMCR, &val);
 		if (err)
 			goto error;