---

yaml
---
r: 74399
b: refs/heads/master
c: 1c016b2
h: refs/heads/master
i:
  74397: 14f1a77
  74395: 1a2adba
  74391: 42fee41
  74383: b1c4a99
  74367: d85c5fd
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 80cbd911ca25535f6bb66bbcbb98950ec328eb40
+refs/heads/master: 1c016b2c728b2ecbdd4088bd42e556fd29065cc5

trunk/Documentation/00-INDEX

@@ -262,8 +262,6 @@ mtrr.txt
 	- how to use PPro Memory Type Range Registers to increase performance.
 mutex-design.txt
 	- info on the generic mutex subsystem.
-namespaces/
-	- directory with various information about namespaces
 nbd.txt
 	- info on a TCP implementation of a network block device.
 netlabel/

trunk/Documentation/DocBook/Makefile

@@ -11,7 +11,7 @@ DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
 	    procfs-guide.xml writing_usb_driver.xml \
 	    kernel-api.xml filesystems.xml lsm.xml usb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml rapidio.xml \
-	    genericirq.xml s390-drivers.xml uio-howto.xml
+	    genericirq.xml s390-drivers.xml
 
 ###
 # The build process is as follows (targets):

trunk/Documentation/DocBook/uio-howto.tmpl

@@ -29,12 +29,6 @@
 </abstract>
 
 <revhistory>
-	<revision>
-	<revnumber>0.4</revnumber>
-	<date>2007-11-26</date>
-	<authorinitials>hjk</authorinitials>
-	<revremark>Removed section about uio_dummy.</revremark>
-	</revision>
 	<revision>
 	<revnumber>0.3</revnumber>
 	<date>2007-04-29</date>
@@ -100,26 +94,6 @@ interested in translating it, please email me
 	user space. This simplifies development and reduces the risk of
 	serious bugs within a kernel module.
 	</para>
-	<para>
-	Please note that UIO is not an universal driver interface. Devices
-	that are already handled well by other kernel subsystems (like
-	networking or serial or USB) are no candidates for an UIO driver.
-	Hardware that is ideally suited for an UIO driver fulfills all of
-	the following:
-	</para>
-<itemizedlist>
-<listitem>
-	<para>The device has memory that can be mapped. The device can be
-	controlled completely by writing to this memory.</para>
-</listitem>
-<listitem>
-	<para>The device usually generates interrupts.</para>
-</listitem>
-<listitem>
-	<para>The device does not fit into one of the standard kernel
-	subsystems.</para>
-</listitem>
-</itemizedlist>
 </sect1>
 
 <sect1 id="thanks">
@@ -200,9 +174,8 @@ interested in translating it, please email me
 	For cards that don't generate interrupts but need to be
 	polled, there is the possibility to set up a timer that
 	triggers the interrupt handler at configurable time intervals.
-	This interrupt simulation is done by calling
-	<function>uio_event_notify()</function>
-	from the timer's event handler.
+	See <filename>drivers/uio/uio_dummy.c</filename> for an
+	example of this technique.
 	</para>
 
 	<para>
@@ -290,11 +263,63 @@ offset = N * getpagesize();
 </sect1>
 </chapter>
 
+<chapter id="using-uio_dummy" xreflabel="Using uio_dummy">
+<?dbhtml filename="using-uio_dummy.html"?>
+<title>Using uio_dummy</title>
+	<para>
+	Well, there is no real use for uio_dummy. Its only purpose is
+	to test most parts of the UIO system (everything except
+	hardware interrupts), and to serve as an example for the
+	kernel module that you will have to write yourself.
+	</para>
+
+<sect1 id="what_uio_dummy_does">
+<title>What uio_dummy does</title>
+	<para>
+	The kernel module <filename>uio_dummy.ko</filename> creates a
+	device that uses a timer to generate periodic interrupts. The
+	interrupt handler does nothing but increment a counter. The
+	driver adds two custom attributes, <varname>count</varname>
+	and <varname>freq</varname>, that appear under
+	<filename>/sys/devices/platform/uio_dummy/</filename>.
+	</para>
+
+	<para>
+	The attribute <varname>count</varname> can be read and
+	written.  The associated file
+	<filename>/sys/devices/platform/uio_dummy/count</filename>
+	appears as a normal text file and contains the total number of
+	timer interrupts. If you look at it (e.g. using
+	<function>cat</function>), you'll notice it is slowly counting
+	up.
+	</para>
+
+	<para>
+	The attribute <varname>freq</varname> can be read and written.
+	The content of
+	<filename>/sys/devices/platform/uio_dummy/freq</filename>
+	represents the number of system timer ticks between two timer
+	interrupts. The default value of <varname>freq</varname> is
+	the value of the kernel variable <varname>HZ</varname>, which
+	gives you an interval of one second. Lower values will
+	increase the frequency. Try the following:
+	</para>
+<programlisting format="linespecific">
+cd /sys/devices/platform/uio_dummy/
+echo 100 > freq
+</programlisting>
+	<para>
+	Use <function>cat count</function> to see how the interrupt
+	frequency changes.
+	</para>
+</sect1>
+</chapter>
+
 <chapter id="custom_kernel_module" xreflabel="Writing your own kernel module">
 <?dbhtml filename="custom_kernel_module.html"?>
 <title>Writing your own kernel module</title>
 	<para>
-	Please have a look at <filename>uio_cif.c</filename> as an
+	Please have a look at <filename>uio_dummy.c</filename> as an
 	example. The following paragraphs explain the different
 	sections of this file.
 	</para>
@@ -329,8 +354,9 @@ See the description below for details.
 interrupt, it's your modules task to determine the irq number during
 initialization. If you don't have a hardware generated interrupt but
 want to trigger the interrupt handler in some other way, set
-<varname>irq</varname> to <varname>UIO_IRQ_CUSTOM</varname>.
-If you had no interrupt at all, you could set
+<varname>irq</varname> to <varname>UIO_IRQ_CUSTOM</varname>. The
+uio_dummy module does this as it triggers the event mechanism in a timer
+routine. If you had no interrupt at all, you could set
 <varname>irq</varname> to <varname>UIO_IRQ_NONE</varname>, though this
 rarely makes sense.
 </para></listitem>

trunk/Documentation/lguest/lguest.c

@@ -1040,11 +1040,6 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 		/ getpagesize();
 	p = get_pages(pages);
 
-	/* Initialize the virtqueue */
-	vq->next = NULL;
-	vq->last_avail_idx = 0;
-	vq->dev = dev;
-
 	/* Initialize the configuration. */
 	vq->config.num = num_descs;
 	vq->config.irq = devices.next_irq++;
@@ -1062,6 +1057,9 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	for (i = &dev->vq; *i; i = &(*i)->next);
 	*i = vq;
 
+	/* Link virtqueue back to device. */
+	vq->dev = dev;
+
 	/* Set the routine to call when the Guest does something to this
 	 * virtqueue. */
 	vq->handle_output = handle_output;
@@ -1095,7 +1093,6 @@ static struct device *new_device(const char *name, u16 type, int fd,
 	dev->desc = new_dev_desc(type);
 	dev->handle_input = handle_input;
 	dev->name = name;
-	dev->vq = NULL;
 	return dev;
 }
 

trunk/Documentation/parport-lowlevel.txt

@@ -339,10 +339,6 @@ Use this function to register your device driver on a parallel port
 ('port').  Once you have done that, you will be able to use
 parport_claim and parport_release in order to use the port.
 
-The ('name') argument is the name of the device that appears in /proc
-filesystem. The string must be valid for the whole lifetime of the
-device (until parport_unregister_device is called).
-
 This function will register three callbacks into your driver:
 'preempt', 'wakeup' and 'irq'.  Each of these may be NULL in order to
 indicate that you do not want a callback.

trunk/Documentation/powerpc/booting-without-of.txt

@@ -1645,9 +1645,8 @@ platforms are moved over to use the flattened-device-tree model.
      MAC addresses passed by the firmware when no information other
      than indices is available to associate an address with a device.
    - phy-connection-type : a string naming the controller/PHY interface type,
-     i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id" (Internal
-     Delay), "rgmii-txid" (delay on TX only), "rgmii-rxid" (delay on RX only),
-     "tbi", or "rtbi".
+     i.e., "mii" (default), "rmii", "gmii", "rgmii", "rgmii-id", "tbi",
+     or "rtbi".
 
    Example:
 	ucc@2000 {

trunk/Documentation/thinkpad-acpi.txt

@@ -1,7 +1,7 @@
 		     ThinkPad ACPI Extras Driver
 
-                            Version 0.17
-                         October 04th, 2007
+                            Version 0.16
+                          August 2nd, 2007
 
                Borislav Deianov <borislav@users.sf.net>
              Henrique de Moraes Holschuh <hmh@hmh.eng.br>
@@ -923,34 +923,19 @@ sysfs backlight device "thinkpad_screen"
 This feature allows software control of the LCD brightness on ThinkPad
 models which don't have a hardware brightness slider.
 
-It has some limitations: the LCD backlight cannot be actually turned on or
-off by this interface, and in many ThinkPad models, the "dim while on
-battery" functionality will be enabled by the BIOS when this interface is
-used, and cannot be controlled.
-
-On IBM (and some of the earlier Lenovo) ThinkPads, the backlight control
-has eight brightness levels, ranging from 0 to 7.  Some of the levels
-may not be distinct.  Later Lenovo models that implement the ACPI
-display backlight brightness control methods have 16 levels, ranging
-from 0 to 15.
-
-There are two interfaces to the firmware for direct brightness control,
-EC and CMOS.  To select which one should be used, use the
-brightness_mode module parameter: brightness_mode=1 selects EC mode,
-brightness_mode=2 selects CMOS mode, brightness_mode=3 selects both EC
-and CMOS.  The driver tries to autodetect which interface to use.
-
-When display backlight brightness controls are available through the
-standard ACPI interface, it is best to use it instead of this direct
-ThinkPad-specific interface.  The driver will disable its native
-backlight brightness control interface if it detects that the standard
-ACPI interface is available in the ThinkPad.
-
-The brightness_enable module parameter can be used to control whether
-the LCD brightness control feature will be enabled when available.
-brightness_enable=0 forces it to be disabled.  brightness_enable=1
-forces it to be enabled when available, even if the standard ACPI
-interface is also available.
+It has some limitations: the LCD backlight cannot be actually turned on or off
+by this interface, and in many ThinkPad models, the "dim while on battery"
+functionality will be enabled by the BIOS when this interface is used, and
+cannot be controlled.
+
+The backlight control has eight levels, ranging from 0 to 7.  Some of the
+levels may not be distinct.
+
+There are two interfaces to the firmware for brightness control, EC and CMOS.
+To select which one should be used, use the brightness_mode module parameter:
+brightness_mode=1 selects EC mode, brightness_mode=2 selects CMOS mode,
+brightness_mode=3 selects both EC and CMOS.  The driver tries to autodetect
+which interface to use.
 
 Procfs notes:
 
@@ -962,11 +947,11 @@ Procfs notes:
 
 Sysfs notes:
 
-The interface is implemented through the backlight sysfs class, which is
-poorly documented at this time.
+The interface is implemented through the backlight sysfs class, which is poorly
+documented at this time.
 
-Locate the thinkpad_screen device under /sys/class/backlight, and inside
-it there will be the following attributes:
+Locate the thinkpad_screen device under /sys/class/backlight, and inside it
+there will be the following attributes:
 
 	max_brightness:
 		Reads the maximum brightness the hardware can be set to.
@@ -976,19 +961,17 @@ it there will be the following attributes:
 		Reads what brightness the screen is set to at this instant.
 
 	brightness:
-		Writes request the driver to change brightness to the
-		given value.  Reads will tell you what brightness the
-		driver is trying to set the display to when "power" is set
-		to zero and the display has not been dimmed by a kernel
-		power management event.
+		Writes request the driver to change brightness to the given
+		value.  Reads will tell you what brightness the driver is trying
+		to set the display to when "power" is set to zero and the display
+		has not been dimmed by a kernel power management event.
 
 	power:
-		power management mode, where 0 is "display on", and 1 to 3
-		will dim the display backlight to brightness level 0
-		because thinkpad-acpi cannot really turn the backlight
-		off.  Kernel power management events can temporarily
-		increase the current power management level, i.e. they can
-		dim the display.
+		power management mode, where 0 is "display on", and 1 to 3 will
+		dim the display backlight to brightness level 0 because
+		thinkpad-acpi cannot really turn the backlight off.  Kernel
+		power management events can temporarily increase the current
+		power management level, i.e. they can dim the display.
 
 
 Volume control -- /proc/acpi/ibm/volume

trunk/Documentation/tty.txt

@@ -132,14 +132,6 @@ set_termios()		Notify the tty driver that the device's termios
 			tty->termios. Previous settings should be passed in
 			the "old" argument.
 
-			The API is defined such that the driver should return
-			the actual modes selected. This means that the
-			driver function is responsible for modifying any
-			bits in the request it cannot fulfill to indicate
-			the actual modes being used. A device with no
-			hardware capability for change (eg a USB dongle or
-			virtual port) can provide NULL for this method.
-
 throttle()		Notify the tty driver that input buffers for the
 			line discipline are close to full, and it should
 			somehow signal that no more characters should be

trunk/Documentation/usb/power-management.txt

@@ -278,14 +278,6 @@ optional.  The methods' jobs are quite simple:
 	(although the interfaces will be in the same altsettings as
 	before the suspend).
 
-If the device is disconnected or powered down while it is suspended,
-the disconnect method will be called instead of the resume or
-reset_resume method.  This is also quite likely to happen when
-waking up from hibernation, as many systems do not maintain suspend
-current to the USB host controllers during hibernation.  (It's
-possible to work around the hibernation-forces-disconnect problem by
-using the USB Persist facility.)
-
 The reset_resume method is used by the USB Persist facility (see
 Documentation/usb/persist.txt) and it can also be used under certain
 circumstances when CONFIG_USB_PERSIST is not enabled.  Currently, if a