rtl8192e: move RTL_DEBUG and proc prototypes

The RTL_DEBUG enum is used for rt_global_debug_component global
variable and RT_TRACE. It should be in rtl_debug.h and not rtl_core.h.

The rtl8192_proc_* functions are r8192 specific and should not be in
rtl_debug.h. Move them to rtl_core.h.

Signed-off-by: Sean MacLennan <seanm@seanm.ca>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/rtl8192e/rtl_core.h

@@ -215,41 +215,6 @@ enum RTL819x_PHY_PARAM {
 	RTL819X_EFUSE_MAP			= 19,
 };
 
-enum RTL_DEBUG {
-	COMP_TRACE		= BIT0,
-	COMP_DBG		= BIT1,
-	COMP_INIT		= BIT2,
-	COMP_RECV		= BIT3,
-	COMP_SEND		= BIT4,
-	COMP_CMD		= BIT5,
-	COMP_POWER		= BIT6,
-	COMP_EPROM		= BIT7,
-	COMP_SWBW		= BIT8,
-	COMP_SEC		= BIT9,
-	COMP_LPS		= BIT10,
-	COMP_QOS		= BIT11,
-	COMP_RATE		= BIT12,
-	COMP_RXDESC		= BIT13,
-	COMP_PHY		= BIT14,
-	COMP_DIG		= BIT15,
-	COMP_TXAGC		= BIT16,
-	COMP_HALDM		= BIT17,
-	COMP_POWER_TRACKING	= BIT18,
-	COMP_CH			= BIT19,
-	COMP_RF			= BIT20,
-	COMP_FIRMWARE		= BIT21,
-	COMP_HT			= BIT22,
-	COMP_RESET		= BIT23,
-	COMP_CMDPKT		= BIT24,
-	COMP_SCAN		= BIT25,
-	COMP_PS			= BIT26,
-	COMP_DOWN		= BIT27,
-	COMP_INTR		= BIT28,
-	COMP_LED		= BIT29,
-	COMP_MLME		= BIT30,
-	COMP_ERR		= BIT31
-};
-
 enum nic_t {
 	NIC_UNKNOWN     = 0,
 	NIC_8192E       = 1,
@@ -1121,4 +1086,10 @@ void ActUpdateChannelAccessSetting(struct net_device *dev,
 			   enum wireless_mode WirelessMode,
 			   struct channel_access_setting *ChnlAccessSetting);
 
+/* proc stuff from rtl_debug.c */
+void rtl8192_proc_init_one(struct net_device *dev);
+void rtl8192_proc_remove_one(struct net_device *dev);
+void rtl8192_proc_module_init(void);
+void rtl8192_proc_module_remove(void);
+
 #endif

drivers/staging/rtl8192e/rtl_debug.h

@@ -29,6 +29,42 @@
 
 extern u32 rt_global_debug_component;
 
+/* These are the defines for rt_global_debug_component */
+enum RTL_DEBUG {
+	COMP_TRACE		= (1 << 0),
+	COMP_DBG		= (1 << 1),
+	COMP_INIT		= (1 << 2),
+	COMP_RECV		= (1 << 3),
+	COMP_SEND		= (1 << 4),
+	COMP_CMD		= (1 << 5),
+	COMP_POWER		= (1 << 6),
+	COMP_EPROM		= (1 << 7),
+	COMP_SWBW		= (1 << 8),
+	COMP_SEC		= (1 << 9),
+	COMP_LPS		= (1 << 10),
+	COMP_QOS		= (1 << 11),
+	COMP_RATE		= (1 << 12),
+	COMP_RXDESC		= (1 << 13),
+	COMP_PHY		= (1 << 14),
+	COMP_DIG		= (1 << 15),
+	COMP_TXAGC		= (1 << 16),
+	COMP_HALDM		= (1 << 17),
+	COMP_POWER_TRACKING	= (1 << 18),
+	COMP_CH			= (1 << 19),
+	COMP_RF			= (1 << 20),
+	COMP_FIRMWARE		= (1 << 21),
+	COMP_HT			= (1 << 22),
+	COMP_RESET		= (1 << 23),
+	COMP_CMDPKT		= (1 << 24),
+	COMP_SCAN		= (1 << 25),
+	COMP_PS			= (1 << 26),
+	COMP_DOWN		= (1 << 27),
+	COMP_INTR		= (1 << 28),
+	COMP_LED		= (1 << 29),
+	COMP_MLME		= (1 << 30),
+	COMP_ERR		= (1 << 31)
+};
+
 #define RT_TRACE(component, x, args...)		\
 do {			\
 	if (rt_global_debug_component & component) \
@@ -42,10 +78,4 @@ do {			\
 		#expr, __FILE__, __func__, __LINE__);	  \
 	}
 
-/* proc stuff */
-void rtl8192_proc_init_one(struct net_device *dev);
-void rtl8192_proc_remove_one(struct net_device *dev);
-void rtl8192_proc_module_init(void);
-void rtl8192_proc_module_remove(void);
-
 #endif