Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/a…

…rm/arm-soc

Pull arm-soc board specific updates from Arnd Bergmann:
 "These changes are all for individual board files.  In the long run,
  those files will largely go away, and the amount of changes appears to
  be continuously decreasing, which is a good sign.  This time around,
  changes are focused on tegra, omap and samsung."

Fix conflicts in arch/arm/mach-{omap2/common-board-devices.c,tegra/Makefile.boot}
as per the 'for-linus' branch.

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: EXYNOS: Add leds status1 and status2 on Origen board
  ARM: S3C64XX: Mark most Cragganmore initdata devinitdata
  ARM: EXYNOS: Add missing .reserve field to SMDKC210
  ARM: EXYNOS: Add DRM device to SMDK4X12 board
  ARM: S3C64XX: Clean up after SPI driver platform data updates
  ARM: SAMSUNG: no need to set the value for clk_xusbxti when it is 24Mhz
  ARM: EXYNOS: Add framebuffer support for SMDK4X12
  ARM: EXYNOS: Add HSOTG support to SMDK4X12
  ARM: S5PV210: Add audio platform device in Goni board
  ARM: S5PV210: Add audio platform device in Aquila board
  ARM: EXYNOS: Add audio platform device in SMDKV310 board
  ARM: S3C64XX: Don't specify an irq_base for WM1192-EV1 board
  ARM: OMAP3: Fix omap3evm randconfig error introduced by VBUS support
  ARM: OMAP: board-omap4panda: MUX configuration for sys_nirq2
  ARM: OMAP: board-4430sdp: MUX configuration for sys_nirq2
  ARM: OMAP3530evm: set pendown_state and debounce time for ads7846
  ARM: omap3evm: enable VBUS switch for EHCI tranceiver
  ARM: OMAP3EVM: Adding USB internal LDOs board file
  ARM: OMAP3EVM: Add NAND flash definition
  ARM: OMAP3: cm-t35: add tvp5150 decoder support
  ...

arch/arm/Kconfig

@@ -683,6 +683,7 @@ config ARCH_TEGRA
 	select MIGHT_HAVE_CACHE_L2X0
 	select NEED_MACH_IO_H if PCI
 	select ARCH_HAS_CPUFREQ
+	select USE_OF
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).

arch/arm/mach-exynos/Kconfig

@@ -207,6 +207,7 @@ config MACH_SMDKV310
 	select S3C_DEV_HSMMC1
 	select S3C_DEV_HSMMC2
 	select S3C_DEV_HSMMC3
+	select S3C_DEV_USB_HSOTG
 	select SAMSUNG_DEV_BACKLIGHT
 	select EXYNOS_DEV_DRM
 	select EXYNOS_DEV_SYSMMU
@@ -326,6 +327,7 @@ config MACH_ORIGEN
 	select S3C_DEV_WDT
 	select S3C_DEV_HSMMC
 	select S3C_DEV_HSMMC2
+	select S3C_DEV_USB_HSOTG
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
@@ -360,22 +362,27 @@ config MACH_SMDK4212
 	select S3C_DEV_I2C3
 	select S3C_DEV_I2C7
 	select S3C_DEV_RTC
+	select S3C_DEV_USB_HSOTG
 	select S3C_DEV_WDT
 	select S5P_DEV_FIMC0
 	select S5P_DEV_FIMC1
 	select S5P_DEV_FIMC2
 	select S5P_DEV_FIMC3
+	select S5P_DEV_FIMD0
 	select S5P_DEV_MFC
 	select SAMSUNG_DEV_BACKLIGHT
 	select SAMSUNG_DEV_KEYPAD
 	select SAMSUNG_DEV_PWM
 	select EXYNOS_DEV_SYSMMU
 	select EXYNOS_DEV_DMA
+	select EXYNOS_DEV_DRM
+	select EXYNOS4_SETUP_FIMD0
 	select EXYNOS4_SETUP_I2C1
 	select EXYNOS4_SETUP_I2C3
 	select EXYNOS4_SETUP_I2C7
 	select EXYNOS4_SETUP_KEYPAD
 	select EXYNOS4_SETUP_SDHCI
+	select EXYNOS4_SETUP_USB_PHY
 	help
 	  Machine support for Samsung SMDK4212
 

arch/arm/mach-exynos/mach-nuri.c

@@ -1341,9 +1341,8 @@ static struct platform_device *nuri_devices[] __initdata = {
 
 static void __init nuri_map_io(void)
 {
-	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
 }
 

arch/arm/mach-exynos/mach-origen.c

@@ -9,6 +9,7 @@
 */
 
 #include <linux/serial_core.h>
+#include <linux/leds.h>
 #include <linux/gpio.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
@@ -21,6 +22,7 @@
 #include <linux/mfd/max8997.h>
 #include <linux/lcd.h>
 #include <linux/rfkill-gpio.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -498,6 +500,37 @@ static void __init origen_ohci_init(void)
 	exynos4_ohci_set_platdata(pdata);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat origen_hsotg_pdata;
+
+static struct gpio_led origen_gpio_leds[] = {
+	{
+		.name			= "origen::status1",
+		.default_trigger	= "heartbeat",
+		.gpio			= EXYNOS4_GPX1(3),
+		.active_low		= 1,
+	},
+	{
+		.name			= "origen::status2",
+		.default_trigger	= "mmc0",
+		.gpio			= EXYNOS4_GPX1(4),
+		.active_low		= 1,
+	},
+};
+
+static struct gpio_led_platform_data origen_gpio_led_info = {
+	.leds		= origen_gpio_leds,
+	.num_leds	= ARRAY_SIZE(origen_gpio_leds),
+};
+
+static struct platform_device origen_leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &origen_gpio_led_info,
+	},
+};
+
 static struct gpio_keys_button origen_gpio_keys_table[] = {
 	{
 		.code			= KEY_MENU,
@@ -654,6 +687,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_i2c0,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
 	&s5p_device_fimc0,
@@ -676,6 +710,7 @@ static struct platform_device *origen_devices[] __initdata = {
 	&exynos4_device_ohci,
 	&origen_device_gpiokeys,
 	&origen_lcd_hv070wsa,
+	&origen_leds_gpio,
 	&origen_device_bluetooth,
 };
 
@@ -711,7 +746,7 @@ static void s5p_tv_setup(void)
 static void __init origen_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
 }
 
@@ -743,7 +778,7 @@ static void __init origen_machine_init(void)
 
 	origen_ehci_init();
 	origen_ohci_init();
-	clk_xusbxti.rate = 24000000;
+	s3c_hsotg_set_platdata(&origen_hsotg_pdata);
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);

arch/arm/mach-exynos/mach-smdk4x12.c

@@ -13,12 +13,14 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/io.h>
+#include <linux/lcd.h>
 #include <linux/mfd/max8997.h>
 #include <linux/mmc/host.h>
 #include <linux/platform_device.h>
 #include <linux/pwm_backlight.h>
 #include <linux/regulator/machine.h>
 #include <linux/serial_core.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -28,15 +30,18 @@
 #include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
+#include <plat/fb.h>
 #include <plat/gpio-cfg.h>
 #include <plat/iic.h>
 #include <plat/keypad.h>
 #include <plat/mfc.h>
+#include <plat/regs-fb.h>
 #include <plat/regs-serial.h>
 #include <plat/sdhci.h>
 
 #include <mach/map.h>
 
+#include <drm/exynos_drm.h>
 #include "common.h"
 
 /* Following are default values for UCON, ULCON and UFCON UART registers */
@@ -219,8 +224,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = {
 
 static uint32_t smdk4x12_keymap[] __initdata = {
 	/* KEY(row, col, keycode) */
-	KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B),
-	KEY(1, 3, KEY_E), KEY(1, 4, KEY_C)
+	KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
+	KEY(1, 6, KEY_4), KEY(1, 7, KEY_5),
+	KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B),
+	KEY(0, 7, KEY_E), KEY(0, 5, KEY_C)
 };
 
 static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
@@ -230,10 +237,62 @@ static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
 
 static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
 	.keymap_data	= &smdk4x12_keymap_data,
-	.rows		= 2,
-	.cols		= 5,
+	.rows		= 3,
+	.cols		= 8,
 };
 
+#ifdef CONFIG_DRM_EXYNOS
+static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
+	.panel	= {
+		.timing	= {
+			.left_margin	= 8,
+			.right_margin	= 8,
+			.upper_margin	= 6,
+			.lower_margin	= 6,
+			.hsync_len	= 6,
+			.vsync_len	= 4,
+			.xres		= 480,
+			.yres		= 800,
+		},
+	},
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.default_win	= 0,
+	.bpp		= 32,
+};
+#else
+static struct s3c_fb_pd_win smdk4x12_fb_win0 = {
+	.xres		= 480,
+	.yres		= 800,
+	.virtual_x	= 480,
+	.virtual_y	= 800 * 2,
+	.max_bpp	= 32,
+	.default_bpp	= 24,
+};
+
+static struct fb_videomode smdk4x12_lcd_timing = {
+	.left_margin	= 8,
+	.right_margin	= 8,
+	.upper_margin	= 6,
+	.lower_margin	= 6,
+	.hsync_len	= 6,
+	.vsync_len	= 4,
+	.xres		= 480,
+	.yres		= 800,
+};
+
+static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = {
+	.win[0]		= &smdk4x12_fb_win0,
+	.vtiming	= &smdk4x12_lcd_timing,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= exynos4_fimd0_gpio_setup_24bpp,
+};
+#endif
+
+/* USB OTG */
+static struct s3c_hsotg_plat smdk4x12_hsotg_pdata;
+
 static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s3c_device_hsmmc2,
 	&s3c_device_hsmmc3,
@@ -242,22 +301,25 @@ static struct platform_device *smdk4x12_devices[] __initdata = {
 	&s3c_device_i2c3,
 	&s3c_device_i2c7,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_fimc0,
 	&s5p_device_fimc1,
 	&s5p_device_fimc2,
 	&s5p_device_fimc3,
 	&s5p_device_fimc_md,
+	&s5p_device_fimd0,
 	&s5p_device_mfc,
 	&s5p_device_mfc_l,
 	&s5p_device_mfc_r,
+#ifdef CONFIG_DRM_EXYNOS
+	&exynos_device_drm,
+#endif
 	&samsung_device_keypad,
 };
 
 static void __init smdk4x12_map_io(void)
 {
-	clk_xusbxti.rate = 24000000;
-
 	exynos_init_io(NULL, 0);
 	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
@@ -293,6 +355,15 @@ static void __init smdk4x12_machine_init(void)
 	s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
 	s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
 
+	s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata);
+
+#ifdef CONFIG_DRM_EXYNOS
+	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
+	exynos4_fimd0_gpio_setup_24bpp();
+#else
+	s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata);
+#endif
+
 	platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
 }
 

arch/arm/mach-exynos/mach-smdkv310.c

@@ -19,6 +19,7 @@
 #include <linux/i2c.h>
 #include <linux/input.h>
 #include <linux/pwm_backlight.h>
+#include <linux/platform_data/s3c-hsotg.h>
 
 #include <asm/mach/arch.h>
 #include <asm/hardware/gic.h>
@@ -270,6 +271,15 @@ static void __init smdkv310_ohci_init(void)
 	exynos4_ohci_set_platdata(pdata);
 }
 
+/* USB OTG */
+static struct s3c_hsotg_plat smdkv310_hsotg_pdata;
+
+/* Audio device */
+static struct platform_device smdkv310_device_audio = {
+	.name = "smdk-audio",
+	.id = -1,
+};
+
 static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_hsmmc0,
 	&s3c_device_hsmmc1,
@@ -278,6 +288,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&s3c_device_i2c1,
 	&s5p_device_i2c_hdmiphy,
 	&s3c_device_rtc,
+	&s3c_device_usb_hsotg,
 	&s3c_device_wdt,
 	&s5p_device_ehci,
 	&s5p_device_fimc0,
@@ -301,6 +312,7 @@ static struct platform_device *smdkv310_devices[] __initdata = {
 	&samsung_asoc_dma,
 	&samsung_asoc_idma,
 	&s5p_device_fimd0,
+	&smdkv310_device_audio,
 	&smdkv310_lcd_lte480wv,
 	&smdkv310_smsc911x,
 	&exynos4_device_ahci,
@@ -353,7 +365,7 @@ static void s5p_tv_setup(void)
 static void __init smdkv310_map_io(void)
 {
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
 }
 
@@ -389,7 +401,7 @@ static void __init smdkv310_machine_init(void)
 
 	smdkv310_ehci_init();
 	smdkv310_ohci_init();
-	clk_xusbxti.rate = 24000000;
+	s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);
 
 	platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
 }
@@ -416,5 +428,6 @@ MACHINE_START(SMDKC210, "SMDKC210")
 	.init_machine	= smdkv310_machine_init,
 	.init_late	= exynos_init_late,
 	.timer		= &exynos4_timer,
+	.reserve	= &smdkv310_reserve,
 	.restart	= exynos4_restart,
 MACHINE_END

arch/arm/mach-exynos/mach-universal_c210.c

@@ -1099,9 +1099,8 @@ static struct platform_device *universal_devices[] __initdata = {
 
 static void __init universal_map_io(void)
 {
-	clk_xusbxti.rate = 24000000;
 	exynos_init_io(NULL, 0);
-	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_clocks(clk_xusbxti.rate);
 	s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
 	s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
 }

arch/arm/mach-omap2/Makefile

@@ -217,6 +217,10 @@ endif
 # OMAP2420 MSDI controller integration support ("MMC")
 obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 
+ifneq ($(CONFIG_DRM_OMAP),)
+obj-y					+= drm.o
+endif
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o