---

yaml
---
r: 32541
b: refs/heads/master
c: a23f463
h: refs/heads/master
i:
  32539: f70169c
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 5cbc1b6f66313111f64e779bf1df3799bf5c2df8
+refs/heads/master: a23f4636c9ae7f1f15c448080f1552864b404136

trunk/Documentation/feature-removal-schedule.txt

@@ -55,14 +55,6 @@ Who:	Mauro Carvalho Chehab <mchehab@brturbo.com.br>
 
 ---------------------------
 
-What:	remove EXPORT_SYMBOL(insert_resource)
-When:	April 2006
-Files:	kernel/resource.c
-Why:	No modular usage in the kernel.
-Who:	Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
 What:	PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
 When:	November 2005
 Files:	drivers/pcmcia/: pcmcia_ioctl.c
@@ -255,3 +247,14 @@ Why:	The interrupt related SA_* flags are replaced by IRQF_* to move them
 Who:	Thomas Gleixner <tglx@linutronix.de>
 
 ---------------------------
+
+What:	i2c-ite and i2c-algo-ite drivers
+When:	September 2006
+Why:	These drivers never compiled since they were added to the kernel
+	tree 5 years ago. This feature removal can be reevaluated if
+	someone shows interest in the drivers, fixes them and takes over
+	maintenance.
+	http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
+Who:	Jean Delvare <khali@linux-fr.org>
+
+---------------------------

trunk/Documentation/hwmon/abituguru

@@ -2,13 +2,36 @@ Kernel driver abituguru
 =======================
 
 Supported chips:
-  * Abit uGuru (Hardware Monitor part only)
+  * Abit uGuru revision 1-3 (Hardware Monitor part only)
     Prefix: 'abituguru'
     Addresses scanned: ISA 0x0E0
     Datasheet: Not available, this driver is based on reverse engineering.
 	A "Datasheet" has been written based on the reverse engineering it
 	should be available in the same dir as this file under the name
 	abituguru-datasheet.
+    Note:
+	The uGuru is a microcontroller with onboard firmware which programs
+	it to behave as a hwmon IC. There are many different revisions of the
+	firmware and thus effectivly many different revisions of the uGuru.
+	Below is an incomplete list with which revisions are used for which
+	Motherboards:
+	uGuru 1.00    ~ 1.24    (AI7, KV8-MAX3, AN7) (1)
+	uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
+	uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
+	uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
+	uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
+	uGuru 3.0.0.0 ~ 3.0.1.2 (AW8, AL8, NI8)
+	uGuru 4.xxxxx?          (AT8 32X) (2)
+	1) For revisions 2 and 3 uGuru's the driver can autodetect the
+	   sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
+	   this doesnot always work. For these uGuru's the autodection can
+	   be overriden with the bank1_types module param. For all 3 known
+	   revison 1 motherboards the correct use of this param is:
+	   bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
+	   You may also need to specify the fan_sensors option for these boards
+	   fan_sensors=5
+	2) The current version of the abituguru driver is known to NOT work
+	   on these Motherboards
 
 Authors:
 	Hans de Goede <j.w.r.degoede@hhs.nl>,
@@ -22,14 +45,19 @@ Module Parameters
 * force: bool		Force detection. Note this parameter only causes the
 			detection to be skipped, if the uGuru can't be read
 			the module initialization (insmod) will still fail.
+* bank1_types: int[]	Bank1 sensortype autodetection override:
+			  -1 autodetect (default)
+			   0 volt sensor
+			   1 temp sensor
+			   2 not connected
 * fan_sensors: int	Tell the driver how many fan speed sensors there are
 			on your motherboard. Default: 0 (autodetect).
 * pwms: int		Tell the driver how many fan speed controls (fan
 			pwms) your motherboard has. Default: 0 (autodetect).
 * verbose: int		How verbose should the driver be? (0-3):
 			   0 normal output
 			   1 + verbose error reporting
-			   2 + sensors type probing info\n"
+			   2 + sensors type probing info (default)
 			   3 + retryable error reporting
 			Default: 2 (the driver is still in the testing phase)
 

trunk/Documentation/i2c/busses/i2c-sis96x

@@ -42,8 +42,8 @@ I suspect that this driver could be made to work for the following SiS
 chipsets as well: 635, and 635T. If anyone owns a board with those chips
 AND is willing to risk crashing & burning an otherwise well-behaved kernel
 in the name of progress... please contact me at <mhoffman@lightlink.com> or
-via the project's mailing list: <lm-sensors@lm-sensors.org>.  Please
-send bug reports and/or success stories as well.
+via the project's mailing list: <i2c@lm-sensors.org>.  Please send bug
+reports and/or success stories as well.
 
 
 TO DOs

trunk/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -1172,7 +1172,7 @@
   }        
 
   /* PCI IDs */
-  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
+  static struct pci_device_id snd_mychip_ids[] = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....
@@ -1565,7 +1565,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
+  static struct pci_device_id snd_mychip_ids[] = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....

trunk/Documentation/usb/usb-serial.txt

@@ -399,10 +399,10 @@ REINER SCT cyberJack pinpad/e-com USB chipcard reader
 
 Prolific PL2303 Driver
 
-  This driver support any device that has the PL2303 chip from Prolific
+  This driver supports any device that has the PL2303 chip from Prolific
   in it.  This includes a number of single port USB to serial
   converters and USB GPS devices.  Devices from Aten (the UC-232) and
-  IO-Data work with this driver.
+  IO-Data work with this driver, as does the DCU-11 mobile-phone cable.
 
   For any questions or problems with this driver, please contact Greg
   Kroah-Hartman at greg@kroah.com

trunk/MAINTAINERS

@@ -274,7 +274,7 @@ S:	Maintained
 ALI1563 I2C DRIVER
 P:	Rudolf Marek
 M:	r.marek@sh.cvut.cz
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 ALPHA PORT
@@ -1249,7 +1249,7 @@ S:	Maintained
 I2C SUBSYSTEM
 P:	Jean Delvare
 M:	khali@linux-fr.org
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 W:	http://www.lm-sensors.nu/
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Maintained
@@ -2093,7 +2093,7 @@ S:      Maintained
 OPENCORES I2C BUS DRIVER
 P:	Peter Korsgaard
 M:	jacmet@sunsite.dk
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
@@ -2752,6 +2752,12 @@ P:	Christoph Hellwig
 M:	hch@infradead.org
 S:	Maintained
 
+TC CLASSIFIER
+P:	Jamal Hadi Salim
+M:	hadi@cyberus.ca
+L:	netdev@vger.kernel.org
+S:	Maintained
+
 TI OMAP RANDOM NUMBER GENERATOR SUPPORT
 P:	Deepak Saxena
 M:	dsaxena@plexity.net
@@ -3132,7 +3138,7 @@ S:	Maintained
 VIAPRO SMBUS DRIVER
 P:	Jean Delvare
 M:	khali@linux-fr.org
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 UCLINUX (AND M68KNOMMU)
@@ -3180,6 +3186,11 @@ S:	Maintained
 W1 DALLAS'S 1-WIRE BUS
 P:	Evgeniy Polyakov
 M:	johnpol@2ka.mipt.ru
+S:	Maintained
+
+W83791D HARDWARE MONITORING DRIVER
+P:	Charles Spirakis
+M:	bezaur@gmail.com
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 

trunk/arch/i386/pci/common.c

@@ -17,10 +17,6 @@
 
 #include "pci.h"
 
-#ifdef CONFIG_PCI_BIOS
-extern  void pcibios_sort(void);
-#endif
-
 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
 				PCI_PROBE_MMCONF;
 

trunk/arch/i386/pci/pci.h

@@ -84,4 +84,4 @@ extern int pci_conf1_read(unsigned int seg, unsigned int bus,
 extern void pci_direct_init(void);
 extern void pci_pcbios_init(void);
 extern void pci_mmcfg_init(void);
-
+extern void pcibios_sort(void);

trunk/arch/s390/hypfs/hypfs_diag.c

@@ -403,7 +403,7 @@ static void *diag204_get_buffer(enum diag204_format fmt, int *pages)
 		*pages = 1;
 		return diag204_alloc_rbuf();
 	} else {/* INFO_EXT */
-		*pages = diag204(SUBC_RSI | INFO_EXT, 0, 0);
+		*pages = diag204(SUBC_RSI | INFO_EXT, 0, NULL);
 		if (*pages <= 0)
 			return ERR_PTR(-ENOSYS);
 		else

trunk/arch/s390/kernel/compat_linux.c

@@ -409,7 +409,7 @@ asmlinkage long sys32_sysinfo(struct sysinfo32 __user *info)
 	mm_segment_t old_fs = get_fs ();
 
 	set_fs (KERNEL_DS);
-	ret = sys_sysinfo(&s);
+	ret = sys_sysinfo((struct sysinfo __user *) &s);
 	set_fs (old_fs);
 	err = put_user (s.uptime, &info->uptime);
 	err |= __put_user (s.loads[0], &info->loads[0]);
@@ -438,7 +438,7 @@ asmlinkage long sys32_sched_rr_get_interval(compat_pid_t pid,
 	mm_segment_t old_fs = get_fs ();
 
 	set_fs (KERNEL_DS);
-	ret = sys_sched_rr_get_interval(pid, &t);
+	ret = sys_sched_rr_get_interval(pid, (struct timespec __user *) &t);
 	set_fs (old_fs);
 	if (put_compat_timespec(&t, interval))
 		return -EFAULT;
@@ -464,7 +464,10 @@ asmlinkage long sys32_rt_sigprocmask(int how, compat_sigset_t __user *set,
 		}
 	}
 	set_fs (KERNEL_DS);
-	ret = sys_rt_sigprocmask(how, set ? &s : NULL, oset ? &s : NULL, sigsetsize);
+	ret = sys_rt_sigprocmask(how,
+				 set ? (sigset_t __user *) &s : NULL,
+				 oset ? (sigset_t __user *) &s : NULL,
+				 sigsetsize);
 	set_fs (old_fs);
 	if (ret) return ret;
 	if (oset) {
@@ -489,7 +492,7 @@ asmlinkage long sys32_rt_sigpending(compat_sigset_t __user *set,
 	mm_segment_t old_fs = get_fs();
 
 	set_fs (KERNEL_DS);
-	ret = sys_rt_sigpending(&s, sigsetsize);
+	ret = sys_rt_sigpending((sigset_t __user *) &s, sigsetsize);
 	set_fs (old_fs);
 	if (!ret) {
 		switch (_NSIG_WORDS) {
@@ -514,7 +517,7 @@ sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo)
 	if (copy_siginfo_from_user32(&info, uinfo))
 		return -EFAULT;
 	set_fs (KERNEL_DS);
-	ret = sys_rt_sigqueueinfo(pid, sig, &info);
+	ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *) &info);
 	set_fs (old_fs);
 	return ret;
 }
@@ -674,7 +677,8 @@ asmlinkage long sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offse
 		return -EFAULT;
 
 	set_fs(KERNEL_DS);
-	ret = sys_sendfile(out_fd, in_fd, offset ? &of : NULL, count);
+	ret = sys_sendfile(out_fd, in_fd,
+			   offset ? (off_t __user *) &of : NULL, count);
 	set_fs(old_fs);
 
 	if (offset && put_user(of, offset))
@@ -694,7 +698,8 @@ asmlinkage long sys32_sendfile64(int out_fd, int in_fd,
 		return -EFAULT;
 
 	set_fs(KERNEL_DS);
-	ret = sys_sendfile64(out_fd, in_fd, offset ? &lof : NULL, count);
+	ret = sys_sendfile64(out_fd, in_fd,
+			     offset ? (loff_t __user *) &lof : NULL, count);
 	set_fs(old_fs);
 
 	if (offset && put_user(lof, offset))

trunk/arch/s390/kernel/machine_kexec.c

@@ -63,6 +63,7 @@ NORET_TYPE void
 machine_kexec(struct kimage *image)
 {
 	clear_all_subchannels();
+	cio_reset_channel_paths();
 
 	/* Disable lowcore protection */
 	ctl_clear_bit(0,28);

trunk/arch/s390/kernel/module.c

@@ -119,7 +119,7 @@ module_frob_arch_sections(Elf_Ehdr *hdr, Elf_Shdr *sechdrs,
 	int nrela, i, j;
 
 	/* Find symbol table and string table. */
-	symtab = 0;
+	symtab = NULL;
 	for (i = 0; i < hdr->e_shnum; i++)
 		switch (sechdrs[i].sh_type) {
 		case SHT_SYMTAB:

trunk/arch/s390/kernel/process.c

@@ -172,7 +172,7 @@ void show_regs(struct pt_regs *regs)
 	show_registers(regs);
 	/* Show stack backtrace if pt_regs is from kernel mode */
 	if (!(regs->psw.mask & PSW_MASK_PSTATE))
-		show_trace(0,(unsigned long *) regs->gprs[15]);
+		show_trace(NULL, (unsigned long *) regs->gprs[15]);
 }
 
 extern void kernel_thread_starter(void);

trunk/arch/s390/kernel/profile.c

@@ -13,7 +13,7 @@ static struct proc_dir_entry * root_irq_dir;
 void init_irq_proc(void)
 {
 	/* create /proc/irq */
-	root_irq_dir = proc_mkdir("irq", 0);
+	root_irq_dir = proc_mkdir("irq", NULL);
 
 	/* create /proc/irq/prof_cpu_mask */
 	create_prof_cpu_mask(root_irq_dir);

trunk/arch/s390/kernel/s390_ext.c

@@ -24,7 +24,7 @@
  * (0x1202 external call, 0x1004 cpu timer, 0x2401 hwc console, 0x4000
  * iucv and 0x2603 pfault) this is always the first element. 
  */
-ext_int_info_t *ext_int_hash[256] = { 0, };
+ext_int_info_t *ext_int_hash[256] = { NULL, };
 
 static inline int ext_hash(__u16 code)
 {

trunk/arch/s390/kernel/time.c

@@ -379,7 +379,7 @@ void __init time_init(void)
                                 -xtime.tv_sec, -xtime.tv_nsec);
 
 	/* request the clock comparator external interrupt */
-        if (register_early_external_interrupt(0x1004, 0,
+	if (register_early_external_interrupt(0x1004, NULL,
 					      &ext_int_info_cc) != 0)
                 panic("Couldn't request external interrupt 0x1004");