---

yaml
---
r: 350718
b: refs/heads/master
c: 65800b2
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c6699b58f4fe2f968f036a862c09ce44b6968376
+refs/heads/master: 65800b2c4012e11f1c33692e6727e743a05c6efe

trunk/Documentation/PCI/MSI-HOWTO.txt

@@ -127,42 +127,15 @@ on the number of vectors that can be allocated; pci_enable_msi_block()
 returns as soon as it finds any constraint that doesn't allow the
 call to succeed.
 
-4.2.3 pci_enable_msi_block_auto
-
-int pci_enable_msi_block_auto(struct pci_dev *dev, unsigned int *count)
-
-This variation on pci_enable_msi() call allows a device driver to request
-the maximum possible number of MSIs.  The MSI specification only allows
-interrupts to be allocated in powers of two, up to a maximum of 2^5 (32).
-
-If this function returns a positive number, it indicates that it has
-succeeded and the returned value is the number of allocated interrupts. In
-this case, the function enables MSI on this device and updates dev->irq to
-be the lowest of the new interrupts assigned to it.  The other interrupts
-assigned to the device are in the range dev->irq to dev->irq + returned
-value - 1.
-
-If this function returns a negative number, it indicates an error and
-the driver should not attempt to request any more MSI interrupts for
-this device.
-
-If the device driver needs to know the number of interrupts the device
-supports it can pass the pointer count where that number is stored. The
-device driver must decide what action to take if pci_enable_msi_block_auto()
-succeeds, but returns a value less than the number of interrupts supported.
-If the device driver does not need to know the number of interrupts
-supported, it can set the pointer count to NULL.
-
-4.2.4 pci_disable_msi
+4.2.3 pci_disable_msi
 
 void pci_disable_msi(struct pci_dev *dev)
 
 This function should be used to undo the effect of pci_enable_msi() or
-pci_enable_msi_block() or pci_enable_msi_block_auto().  Calling it restores
-dev->irq to the pin-based interrupt number and frees the previously
-allocated message signaled interrupt(s).  The interrupt may subsequently be
-assigned to another device, so drivers should not cache the value of
-dev->irq.
+pci_enable_msi_block().  Calling it restores dev->irq to the pin-based
+interrupt number and frees the previously allocated message signaled
+interrupt(s).  The interrupt may subsequently be assigned to another
+device, so drivers should not cache the value of dev->irq.
 
 Before calling this function, a device driver must always call free_irq()
 on any interrupt for which it previously called request_irq().

trunk/Documentation/atomic_ops.txt

@@ -253,8 +253,6 @@ This performs an atomic exchange operation on the atomic variable v, setting
 the given new value.  It returns the old value that the atomic variable v had
 just before the operation.
 
-atomic_xchg requires explicit memory barriers around the operation.
-
 	int atomic_cmpxchg(atomic_t *v, int old, int new);
 
 This performs an atomic compare exchange operation on the atomic value v,

trunk/Documentation/cgroups/00-INDEX

@@ -4,6 +4,8 @@ blkio-controller.txt
 	- Description for Block IO Controller, implementation and usage details.
 cgroups.txt
 	- Control Groups definition, implementation details, examples and API.
+cgroup_event_listener.c
+	- A user program for cgroup listener.
 cpuacct.txt
 	- CPU Accounting Controller; account CPU usage for groups of tasks.
 cpusets.txt

trunk/tools/cgroup/cgroup_event_listener.c → trunk/Documentation/cgroups/cgroup_event_listener.c

@@ -5,7 +5,6 @@
  */
 
 #include <assert.h>
-#include <err.h>
 #include <errno.h>
 #include <fcntl.h>
 #include <libgen.h>
@@ -16,7 +15,7 @@
 
 #include <sys/eventfd.h>
 
-#define USAGE_STR "Usage: cgroup_event_listener <path-to-control-file> <args>"
+#define USAGE_STR "Usage: cgroup_event_listener <path-to-control-file> <args>\n"
 
 int main(int argc, char **argv)
 {
@@ -27,33 +26,49 @@ int main(int argc, char **argv)
 	char line[LINE_MAX];
 	int ret;
 
-	if (argc != 3)
-		errx(1, "%s", USAGE_STR);
+	if (argc != 3) {
+		fputs(USAGE_STR, stderr);
+		return 1;
+	}
 
 	cfd = open(argv[1], O_RDONLY);
-	if (cfd == -1)
-		err(1, "Cannot open %s", argv[1]);
+	if (cfd == -1) {
+		fprintf(stderr, "Cannot open %s: %s\n", argv[1],
+				strerror(errno));
+		goto out;
+	}
 
 	ret = snprintf(event_control_path, PATH_MAX, "%s/cgroup.event_control",
 			dirname(argv[1]));
-	if (ret >= PATH_MAX)
-		errx(1, "Path to cgroup.event_control is too long");
+	if (ret >= PATH_MAX) {
+		fputs("Path to cgroup.event_control is too long\n", stderr);
+		goto out;
+	}
 
 	event_control = open(event_control_path, O_WRONLY);
-	if (event_control == -1)
-		err(1, "Cannot open %s", event_control_path);
+	if (event_control == -1) {
+		fprintf(stderr, "Cannot open %s: %s\n", event_control_path,
+				strerror(errno));
+		goto out;
+	}
 
 	efd = eventfd(0, 0);
-	if (efd == -1)
-		err(1, "eventfd() failed");
+	if (efd == -1) {
+		perror("eventfd() failed");
+		goto out;
+	}
 
 	ret = snprintf(line, LINE_MAX, "%d %d %s", efd, cfd, argv[2]);
-	if (ret >= LINE_MAX)
-		errx(1, "Arguments string is too long");
+	if (ret >= LINE_MAX) {
+		fputs("Arguments string is too long\n", stderr);
+		goto out;
+	}
 
 	ret = write(event_control, line, strlen(line) + 1);
-	if (ret == -1)
-		err(1, "Cannot write to cgroup.event_control");
+	if (ret == -1) {
+		perror("Cannot write to cgroup.event_control");
+		goto out;
+	}
 
 	while (1) {
 		uint64_t result;
@@ -62,21 +77,34 @@ int main(int argc, char **argv)
 		if (ret == -1) {
 			if (errno == EINTR)
 				continue;
-			err(1, "Cannot read from eventfd");
+			perror("Cannot read from eventfd");
+			break;
 		}
 		assert(ret == sizeof(result));
 
 		ret = access(event_control_path, W_OK);
 		if ((ret == -1) && (errno == ENOENT)) {
-			puts("The cgroup seems to have removed.");
-			break;
+				puts("The cgroup seems to have removed.");
+				ret = 0;
+				break;
 		}
 
-		if (ret == -1)
-			err(1, "cgroup.event_control is not accessible any more");
+		if (ret == -1) {
+			perror("cgroup.event_control "
+					"is not accessible any more");
+			break;
+		}
 
 		printf("%s %s: crossed\n", argv[1], argv[2]);
 	}
 
-	return 0;
+out:
+	if (efd >= 0)
+		close(efd);
+	if (event_control >= 0)
+		close(event_control);
+	if (cfd >= 0)
+		close(cfd);
+
+	return (ret != 0);
 }

trunk/Documentation/cgroups/memcg_test.txt

@@ -399,7 +399,8 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 
  9.10 Memory thresholds
 	Memory controller implements memory thresholds using cgroups notification
-	API. You can use tools/cgroup/cgroup_event_listener.c to test it.
+	API. You can use Documentation/cgroups/cgroup_event_listener.c to test
+	it.
 
 	(Shell-A) Create cgroup and run event listener
 	# mkdir /cgroup/A

trunk/Documentation/device-mapper/dm-raid.txt

@@ -141,4 +141,3 @@ Version History
 1.2.0	Handle creation of arrays that contain failed devices.
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
-1.3.2   Fix/improve redundancy checking for RAID10