---

yaml
---
r: 71653
b: refs/heads/master
c: 00a2b43
h: refs/heads/master
i:
  71651: 953948a
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 2d571b33cf7efd6a894e765e3cb45587ec5b834a
+refs/heads/master: 00a2b433557f10736e8a02de619b3e9052556c12

trunk/Documentation/thinkpad-acpi.txt

@@ -105,10 +105,15 @@ The version of thinkpad-acpi's sysfs interface is exported by the driver
 as a driver attribute (see below).
 
 Sysfs driver attributes are on the driver's sysfs attribute space,
-for 2.6.20 this is /sys/bus/platform/drivers/thinkpad_acpi/.
+for 2.6.23 this is /sys/bus/platform/drivers/thinkpad_acpi/ and
+/sys/bus/platform/drivers/thinkpad_hwmon/
 
-Sysfs device attributes are on the driver's sysfs attribute space,
-for 2.6.20 this is /sys/devices/platform/thinkpad_acpi/.
+Sysfs device attributes are on the thinkpad_acpi device sysfs attribute
+space, for 2.6.23 this is /sys/devices/platform/thinkpad_acpi/.
+
+Sysfs device attributes for the sensors and fan are on the
+thinkpad_hwmon device's sysfs attribute space, but you should locate it
+looking for a hwmon device with the name attribute of "thinkpad".
 
 Driver version
 --------------
@@ -766,7 +771,7 @@ Temperature sensors
 -------------------
 
 procfs: /proc/acpi/ibm/thermal
-sysfs device attributes: (hwmon) temp*_input
+sysfs device attributes: (hwmon "thinkpad") temp*_input
 
 Most ThinkPads include six or more separate temperature sensors but only
 expose the CPU temperature through the standard ACPI methods.  This
@@ -989,7 +994,9 @@ Fan control and monitoring: fan speed, fan enable/disable
 ---------------------------------------------------------
 
 procfs: /proc/acpi/ibm/fan
-sysfs device attributes: (hwmon) fan_input, pwm1, pwm1_enable
+sysfs device attributes: (hwmon "thinkpad") fan1_input, pwm1,
+			  pwm1_enable
+sysfs hwmon driver attributes: fan_watchdog
 
 NOTE NOTE NOTE: fan control operations are disabled by default for
 safety reasons.  To enable them, the module parameter "fan_control=1"
@@ -1131,7 +1138,7 @@ hwmon device attribute fan1_input:
 	which can take up to two minutes.  May return rubbish on older
 	ThinkPads.
 
-driver attribute fan_watchdog:
+hwmon driver attribute fan_watchdog:
 	Fan safety watchdog timer interval, in seconds.  Minimum is
 	1 second, maximum is 120 seconds.  0 disables the watchdog.
 
@@ -1233,3 +1240,9 @@ Sysfs interface changelog:
 		layer, the radio switch generates input event EV_RADIO,
 		and the driver enables hot key handling by default in
 		the firmware.
+
+0x020000:	ABI fix: added a separate hwmon platform device and
+		driver, which must be located by name (thinkpad)
+		and the hwmon class for libsensors4 (lm-sensors 3)
+		compatibility.  Moved all hwmon attributes to this
+		new platform device.

trunk/arch/i386/Kconfig

@@ -1069,6 +1069,8 @@ endif # APM
 
 source "arch/i386/kernel/cpu/cpufreq/Kconfig"
 
+source "drivers/cpuidle/Kconfig"
+
 endmenu
 
 menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"

trunk/arch/x86_64/Kconfig

@@ -706,6 +706,8 @@ source "drivers/acpi/Kconfig"
 
 source "arch/x86_64/kernel/cpufreq/Kconfig"
 
+source "drivers/cpuidle/Kconfig"
+
 endmenu
 
 menu "Bus options (PCI etc.)"

trunk/drivers/Makefile

@@ -76,6 +76,7 @@ obj-$(CONFIG_MCA)		+= mca/
 obj-$(CONFIG_EISA)		+= eisa/
 obj-$(CONFIG_LGUEST_GUEST)	+= lguest/
 obj-$(CONFIG_CPU_FREQ)		+= cpufreq/
+obj-$(CONFIG_CPU_IDLE)		+= cpuidle/
 obj-$(CONFIG_MMC)		+= mmc/
 obj-$(CONFIG_NEW_LEDS)		+= leds/
 obj-$(CONFIG_INFINIBAND)	+= infiniband/

trunk/drivers/acpi/Kconfig

@@ -88,7 +88,7 @@ config ACPI_PROC_EVENT
 
 config ACPI_AC
 	tristate "AC Adapter"
-	depends on X86
+	depends on X86 && POWER_SUPPLY
 	default y
 	help
 	  This driver adds support for the AC Adapter object, which indicates
@@ -97,7 +97,7 @@ config ACPI_AC
 
 config ACPI_BATTERY
 	tristate "Battery"
-	depends on X86
+	depends on X86 && POWER_SUPPLY
 	default y
 	help
 	  This driver adds support for battery information through
@@ -117,6 +117,7 @@ config ACPI_BUTTON
 config ACPI_VIDEO
 	tristate "Video"
 	depends on X86 && BACKLIGHT_CLASS_DEVICE && VIDEO_OUTPUT_CONTROL
+	depends on INPUT
 	help
 	  This driver implement the ACPI Extensions For Display Adapters
 	  for integrated graphics devices on motherboard, as specified in
@@ -349,12 +350,11 @@ config ACPI_HOTPLUG_MEMORY
 		$>modprobe acpi_memhotplug 
 
 config ACPI_SBS
-	tristate "Smart Battery System (EXPERIMENTAL)"
+	tristate "Smart Battery System"
 	depends on X86
-	depends on EXPERIMENTAL
+	depends on POWER_SUPPLY
 	help
-	  This driver adds support for the Smart Battery System.
-	  A "Smart Battery" is quite old and quite rare compared
-	  to today's ACPI "Control Method" battery.
+	  This driver adds support for the Smart Battery System, another
+	  type of access to battery information, found on some laptops.
 
 endif	# ACPI

trunk/drivers/acpi/Makefile

@@ -60,3 +60,4 @@ obj-$(CONFIG_ACPI_TOSHIBA)	+= toshiba_acpi.o
 obj-$(CONFIG_ACPI_HOTPLUG_MEMORY)	+= acpi_memhotplug.o
 obj-y				+= cm_sbs.o
 obj-$(CONFIG_ACPI_SBS)		+= sbs.o
+obj-$(CONFIG_ACPI_SBS)		+= sbshc.o

trunk/drivers/acpi/ac.c

@@ -29,6 +29,7 @@
 #include <linux/types.h>
 #include <linux/proc_fs.h>
 #include <linux/seq_file.h>
+#include <linux/power_supply.h>
 #include <acpi/acpi_bus.h>
 #include <acpi/acpi_drivers.h>
 
@@ -72,16 +73,37 @@ static struct acpi_driver acpi_ac_driver = {
 };
 
 struct acpi_ac {
+	struct power_supply charger;
 	struct acpi_device * device;
 	unsigned long state;
 };
 
+#define to_acpi_ac(x) container_of(x, struct acpi_ac, charger);
+
 static const struct file_operations acpi_ac_fops = {
 	.open = acpi_ac_open_fs,
 	.read = seq_read,
 	.llseek = seq_lseek,
 	.release = single_release,
 };
+static int get_ac_property(struct power_supply *psy,
+			   enum power_supply_property psp,
+			   union power_supply_propval *val)
+{
+	struct acpi_ac *ac = to_acpi_ac(psy);
+	switch (psp) {
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = ac->state;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static enum power_supply_property ac_props[] = {
+	POWER_SUPPLY_PROP_ONLINE,
+};
 
 /* --------------------------------------------------------------------------
                                AC Adapter Management
@@ -208,6 +230,7 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data)
 		acpi_bus_generate_netlink_event(device->pnp.device_class,
 						  device->dev.bus_id, event,
 						  (u32) ac->state);
+		kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
 		break;
 	default:
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO,
@@ -244,7 +267,12 @@ static int acpi_ac_add(struct acpi_device *device)
 	result = acpi_ac_add_fs(device);
 	if (result)
 		goto end;
-
+	ac->charger.name = acpi_device_bid(device);
+	ac->charger.type = POWER_SUPPLY_TYPE_MAINS;
+	ac->charger.properties = ac_props;
+	ac->charger.num_properties = ARRAY_SIZE(ac_props);
+	ac->charger.get_property = get_ac_property;
+	power_supply_register(&ac->device->dev, &ac->charger);
 	status = acpi_install_notify_handler(device->handle,
 					     ACPI_ALL_NOTIFY, acpi_ac_notify,
 					     ac);
@@ -279,7 +307,8 @@ static int acpi_ac_remove(struct acpi_device *device, int type)
 
 	status = acpi_remove_notify_handler(device->handle,
 					    ACPI_ALL_NOTIFY, acpi_ac_notify);
-
+	if (ac->charger.dev)
+		power_supply_unregister(&ac->charger);
 	acpi_ac_remove_fs(device);
 
 	kfree(ac);