regulator: pv88060: new regulator driver

This is the driver for the Powerventure PV88060 BUCKs and LDOs regulator. It communicates via an I2C bus to the device. Signed-off-by: James Ban <James.Ban.opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
git-mirror · Nov 20, 2015 · f307a7e · f307a7e
1 parent 8005c49
commit f307a7e
Show file tree

Hide file tree

Showing 5 changed files with 639 additions and 0 deletions.
diff --git a/Documentation/devicetree/bindings/regulator/pv88060.txt b/Documentation/devicetree/bindings/regulator/pv88060.txt
@@ -0,0 +1,124 @@
+* Powerventure Semiconductor PV88060 Voltage Regulator
+
+Required properties:
+- compatible: "pvs,pv88060".
+- reg: I2C slave address, usually 0x49.
+- interrupts: the interrupt outputs of the controller
+- regulators: A node that houses a sub-node for each regulator within the
+  device. Each sub-node is identified using the node's name, with valid
+  values listed below. The content of each sub-node is defined by the
+  standard binding for regulators; see regulator.txt.
+  BUCK1, LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, SW1, SW2, SW3, SW4,
+  SW5, and SW6.
+
+Optional properties:
+- Any optional property defined in regulator.txt
+
+Example
+
+	pmic: pv88060@49 {
+		compatible = "pvs,pv88060";
+		reg = <0x49>;
+		interrupt-parent = <&gpio>;
+		interrupts = <24 24>;
+
+		regulators {
+			BUCK1 {
+				regulator-name = "buck1";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <4387500>;
+				regulator-min-microamp 	= <1496000>;
+				regulator-max-microamp 	= <4189000>;
+				regulator-boot-on;
+			};
+
+			LDO1 {
+				regulator-name = "ldo1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO2 {
+				regulator-name = "ldo2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO3 {
+				regulator-name = "ldo3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO4 {
+				regulator-name = "ldo4";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO5 {
+				regulator-name = "ldo5";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO6 {
+				regulator-name = "ldo6";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			LDO7 {
+				regulator-name = "ldo7";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3350000>;
+				regulator-boot-on;
+			};
+
+			SW1 {
+				regulator-name = "sw1";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+			};
+
+			SW2 {
+				regulator-name = "sw2";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+			};
+
+			SW3 {
+				regulator-name = "sw3";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+			};
+
+			SW4 {
+				regulator-name = "sw4";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+			};
+
+			SW5 {
+				regulator-name = "sw5";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+				regulator-boot-on;
+			};
+
+			SW6 {
+				regulator-name = "sw6";
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5000000>;
+			};
+		};
+	};
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
@@ -504,6 +504,14 @@ config REGULATOR_PFUZE100
 	  Say y here to support the regulators found on the Freescale
 	  PFUZE100/PFUZE200 PMIC.
 
+config REGULATOR_PV88060
+	tristate "Powerventure Semiconductor PV88060 regulator"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to support the voltage regulators and convertors
+	  PV88060
+
 config REGULATOR_PWM
 	tristate "PWM voltage regulator"
 	depends on PWM

diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o
 obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
 obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
+obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
 obj-$(CONFIG_REGULATOR_PWM) += pwm-regulator.o
 obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
 obj-$(CONFIG_REGULATOR_PBIAS) += pbias-regulator.o