---

yaml
---
r: 350176
b: refs/heads/master
c: 266d7ad
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 36dfbbf136db0d645bacfd42ce7d9d6928ea532d
+refs/heads/master: 266d7ad7f4fe2f44b91561f5b812115c1b3018ab

trunk/Documentation/ABI/testing/sysfs-bus-event_source-devices-events

@@ -0,0 +1,62 @@
+What:		/sys/devices/cpu/events/
+		/sys/devices/cpu/events/branch-misses
+		/sys/devices/cpu/events/cache-references
+		/sys/devices/cpu/events/cache-misses
+		/sys/devices/cpu/events/stalled-cycles-frontend
+		/sys/devices/cpu/events/branch-instructions
+		/sys/devices/cpu/events/stalled-cycles-backend
+		/sys/devices/cpu/events/instructions
+		/sys/devices/cpu/events/cpu-cycles
+
+Date:		2013/01/08
+
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+
+Description:	Generic performance monitoring events
+
+		A collection of performance monitoring events that may be
+		supported by many/most CPUs. These events can be monitored
+		using the 'perf(1)' tool.
+
+		The contents of each file would look like:
+
+			event=0xNNNN
+
+		where 'N' is a hex digit and the number '0xNNNN' shows the
+		"raw code" for the perf event identified by the file's
+		"basename".
+
+
+What: 		/sys/devices/cpu/events/PM_LD_MISS_L1
+		/sys/devices/cpu/events/PM_LD_REF_L1
+		/sys/devices/cpu/events/PM_CYC
+		/sys/devices/cpu/events/PM_BRU_FIN
+		/sys/devices/cpu/events/PM_GCT_NOSLOT_CYC
+		/sys/devices/cpu/events/PM_BRU_MPRED
+		/sys/devices/cpu/events/PM_INST_CMPL
+		/sys/devices/cpu/events/PM_CMPLU_STALL
+
+Date:		2013/01/08
+
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+		Linux Powerpc mailing list <linuxppc-dev@ozlabs.org>
+
+Description:	POWER-systems specific performance monitoring events
+
+		A collection of performance monitoring events that may be
+		supported by the POWER CPU. These events can be monitored
+		using the 'perf(1)' tool.
+
+		These events may not be supported by other CPUs.
+
+		The contents of each file would look like:
+
+			event=0xNNNN
+
+		where 'N' is a hex digit and the number '0xNNNN' shows the
+		"raw code" for the perf event identified by the file's
+		"basename".
+
+		Further, multiple terms like 'event=0xNNNN' can be specified
+		and separated with comma. All available terms are defined in
+		the /sys/bus/event_source/devices/<dev>/format file.

trunk/Documentation/atomic_ops.txt

@@ -253,6 +253,8 @@ This performs an atomic exchange operation on the atomic variable v, setting
 the given new value.  It returns the old value that the atomic variable v had
 just before the operation.
 
+atomic_xchg requires explicit memory barriers around the operation.
+
 	int atomic_cmpxchg(atomic_t *v, int old, int new);
 
 This performs an atomic compare exchange operation on the atomic value v,

trunk/Documentation/kernel-parameters.txt

@@ -2438,7 +2438,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			real-time workloads.  It can also improve energy
 			efficiency for asymmetric multiprocessors.
 
-	rcu_nocbs_poll	[KNL,BOOT]
+	rcu_nocb_poll	[KNL,BOOT]
 			Rather than requiring that offloaded CPUs
 			(specified by rcu_nocbs= above) explicitly
 			awaken the corresponding "rcuoN" kthreads,

trunk/Documentation/memory-barriers.txt

@@ -1685,6 +1685,7 @@ explicit lock operations, described later).  These include:
 
 	xchg();
 	cmpxchg();
+	atomic_xchg();
 	atomic_cmpxchg();
 	atomic_inc_return();
 	atomic_dec_return();

trunk/Documentation/trace/ftrace.txt

@@ -1842,6 +1842,89 @@ an error.
  # cat buffer_size_kb
 85
 
+Snapshot
+--------
+CONFIG_TRACER_SNAPSHOT makes a generic snapshot feature
+available to all non latency tracers. (Latency tracers which
+record max latency, such as "irqsoff" or "wakeup", can't use
+this feature, since those are already using the snapshot
+mechanism internally.)
+
+Snapshot preserves a current trace buffer at a particular point
+in time without stopping tracing. Ftrace swaps the current
+buffer with a spare buffer, and tracing continues in the new
+current (=previous spare) buffer.
+
+The following debugfs files in "tracing" are related to this
+feature:
+
+  snapshot:
+
+	This is used to take a snapshot and to read the output
+	of the snapshot. Echo 1 into this file to allocate a
+	spare buffer and to take a snapshot (swap), then read
+	the snapshot from this file in the same format as
+	"trace" (described above in the section "The File
+	System"). Both reads snapshot and tracing are executable
+	in parallel. When the spare buffer is allocated, echoing
+	0 frees it, and echoing else (positive) values clear the
+	snapshot contents.
+	More details are shown in the table below.
+
+	status\input  |     0      |     1      |    else    |
+	--------------+------------+------------+------------+
+	not allocated |(do nothing)| alloc+swap |   EINVAL   |
+	--------------+------------+------------+------------+
+	allocated     |    free    |    swap    |   clear    |
+	--------------+------------+------------+------------+
+
+Here is an example of using the snapshot feature.
+
+ # echo 1 > events/sched/enable
+ # echo 1 > snapshot
+ # cat snapshot
+# tracer: nop
+#
+# entries-in-buffer/entries-written: 71/71   #P:8
+#
+#                              _-----=> irqs-off
+#                             / _----=> need-resched
+#                            | / _---=> hardirq/softirq
+#                            || / _--=> preempt-depth
+#                            ||| /     delay
+#           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
+#              | |       |   ||||       |         |
+          <idle>-0     [005] d...  2440.603828: sched_switch: prev_comm=swapper/5 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=snapshot-test-2 next_pid=2242 next_prio=120
+           sleep-2242  [005] d...  2440.603846: sched_switch: prev_comm=snapshot-test-2 prev_pid=2242 prev_prio=120 prev_state=R ==> next_comm=kworker/5:1 next_pid=60 next_prio=120
+[...]
+          <idle>-0     [002] d...  2440.707230: sched_switch: prev_comm=swapper/2 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=snapshot-test-2 next_pid=2229 next_prio=120
+
+ # cat trace
+# tracer: nop
+#
+# entries-in-buffer/entries-written: 77/77   #P:8
+#
+#                              _-----=> irqs-off
+#                             / _----=> need-resched
+#                            | / _---=> hardirq/softirq
+#                            || / _--=> preempt-depth
+#                            ||| /     delay
+#           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
+#              | |       |   ||||       |         |
+          <idle>-0     [007] d...  2440.707395: sched_switch: prev_comm=swapper/7 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=snapshot-test-2 next_pid=2243 next_prio=120
+ snapshot-test-2-2229  [002] d...  2440.707438: sched_switch: prev_comm=snapshot-test-2 prev_pid=2229 prev_prio=120 prev_state=S ==> next_comm=swapper/2 next_pid=0 next_prio=120
+[...]
+
+
+If you try to use this snapshot feature when current tracer is
+one of the latency tracers, you will get the following results.
+
+ # echo wakeup > current_tracer
+ # echo 1 > snapshot
+bash: echo: write error: Device or resource busy
+ # cat snapshot
+cat: snapshot: Device or resource busy
+
 -----------
 
 More details can be found in the source code, in the

trunk/Documentation/x86/boot.txt

@@ -57,7 +57,7 @@ Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
 Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
 		protocol entry point.
 
-Protocol 2.12:	(Kernel 3.9) Added the xloadflags field and extension fields
+Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
 	 	to struct boot_params for for loading bzImage and ramdisk
 		above 4G in 64bit.
 
@@ -390,6 +390,7 @@ Protocol:	2.00+
 	F  Special		(0xFF = undefined)
        10  Reserved
        11  Minimal Linux Bootloader <http://sebastian-plotz.blogspot.de>
+       12  OVMF UEFI virtualization stack
 
   Please contact <hpa@zytor.com> if you need a bootloader ID
   value assigned.

trunk/MAINTAINERS

@@ -1303,7 +1303,7 @@ F:	include/linux/dmaengine.h
 F:	include/linux/async_tx.h
 
 AT24 EEPROM DRIVER
-M:	Wolfram Sang <w.sang@pengutronix.de>
+M:	Wolfram Sang <wsa@the-dreams.de>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/misc/eeprom/at24.c
@@ -1489,7 +1489,7 @@ AVR32 ARCHITECTURE
 M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
 M:	Hans-Christian Egtvedt <egtvedt@samfundet.no>
 W:	http://www.atmel.com/products/AVR32/
-W:	http://avr32linux.org/
+W:	http://mirror.egtvedt.no/avr32linux.org/
 W:	http://avrfreaks.net/
 S:	Maintained
 F:	arch/avr32/
@@ -3757,12 +3757,11 @@ S:	Maintained
 F:	drivers/i2c/i2c-stub.c
 
 I2C SUBSYSTEM
-M:	Wolfram Sang <w.sang@pengutronix.de>
+M:	Wolfram Sang <wsa@the-dreams.de>
 M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
-T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
-T:	git git://git.pengutronix.de/git/wsa/linux.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
 S:	Maintained
 F:	Documentation/i2c/
 F:	drivers/i2c/
@@ -5778,15 +5777,6 @@ L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/muxes/i2c-mux-pca9541.c
 
-PCA9564/PCA9665 I2C BUS DRIVER
-M:	Wolfram Sang <w.sang@pengutronix.de>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	drivers/i2c/algos/i2c-algo-pca.c
-F:	drivers/i2c/busses/i2c-pca-*
-F:	include/linux/i2c-algo-pca.h
-F:	include/linux/i2c-pca-platform.h
-
 PCDP - PRIMARY CONSOLE AND DEBUG PORT
 M:	Khalid Aziz <khalid@gonehiking.org>
 S:	Maintained

trunk/Makefile

@@ -1,8 +1,8 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
-NAME = Terrified Chipmunk
+EXTRAVERSION =
+NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

trunk/arch/Kconfig

@@ -76,6 +76,15 @@ config OPTPROBES
 	depends on KPROBES && HAVE_OPTPROBES
 	depends on !PREEMPT
 
+config KPROBES_ON_FTRACE
+	def_bool y
+	depends on KPROBES && HAVE_KPROBES_ON_FTRACE
+	depends on DYNAMIC_FTRACE_WITH_REGS
+	help
+	 If function tracer is enabled and the arch supports full
+	 passing of pt_regs to function tracing, then kprobes can
+	 optimize on top of function tracing.
+
 config UPROBES
 	bool "Transparent user-space probes (EXPERIMENTAL)"
 	depends on UPROBE_EVENT && PERF_EVENTS
@@ -158,6 +167,9 @@ config HAVE_KRETPROBES
 config HAVE_OPTPROBES
 	bool
 
+config HAVE_KPROBES_ON_FTRACE
+	bool
+
 config HAVE_NMI_WATCHDOG
 	bool
 #

trunk/arch/alpha/Kconfig

@@ -5,7 +5,6 @@ config ALPHA
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_SYSCALL_WRAPPERS
-	select HAVE_IRQ_WORK
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
 	select HAVE_DMA_ATTRS

trunk/arch/alpha/kernel/osf_sys.c

@@ -1139,15 +1139,17 @@ struct rusage32 {
 SYSCALL_DEFINE2(osf_getrusage, int, who, struct rusage32 __user *, ru)
 {
 	struct rusage32 r;
+	cputime_t utime, stime;
 
 	if (who != RUSAGE_SELF && who != RUSAGE_CHILDREN)
 		return -EINVAL;
 
 	memset(&r, 0, sizeof(r));
 	switch (who) {
 	case RUSAGE_SELF:
-		jiffies_to_timeval32(current->utime, &r.ru_utime);
-		jiffies_to_timeval32(current->stime, &r.ru_stime);
+		task_cputime(current, &utime, &stime);
+		jiffies_to_timeval32(utime, &r.ru_utime);
+		jiffies_to_timeval32(stime, &r.ru_stime);
 		r.ru_minflt = current->min_flt;
 		r.ru_majflt = current->maj_flt;
 		break;

trunk/arch/arm/Kconfig

@@ -36,7 +36,6 @@ config ARM
 	select HAVE_GENERIC_HARDIRQS
 	select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7))
 	select HAVE_IDE if PCI || ISA || PCMCIA
-	select HAVE_IRQ_WORK
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZMA
 	select HAVE_KERNEL_LZO

trunk/arch/arm/common/gic.c

@@ -351,6 +351,25 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
 	irq_set_chained_handler(irq, gic_handle_cascade_irq);
 }
 
+static u8 gic_get_cpumask(struct gic_chip_data *gic)
+{
+	void __iomem *base = gic_data_dist_base(gic);
+	u32 mask, i;
+
+	for (i = mask = 0; i < 32; i += 4) {
+		mask = readl_relaxed(base + GIC_DIST_TARGET + i);
+		mask |= mask >> 16;
+		mask |= mask >> 8;
+		if (mask)
+			break;
+	}
+
+	if (!mask)
+		pr_crit("GIC CPU mask not found - kernel will fail to boot.\n");
+
+	return mask;
+}
+
 static void __init gic_dist_init(struct gic_chip_data *gic)
 {
 	unsigned int i;
@@ -369,7 +388,9 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 	/*
 	 * Set all global interrupts to this CPU only.
 	 */
-	cpumask = readl_relaxed(base + GIC_DIST_TARGET + 0);
+	cpumask = gic_get_cpumask(gic);
+	cpumask |= cpumask << 8;
+	cpumask |= cpumask << 16;
 	for (i = 32; i < gic_irqs; i += 4)
 		writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
 
@@ -400,7 +421,7 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
 	 * Get what the GIC says our CPU mask is.
 	 */
 	BUG_ON(cpu >= NR_GIC_CPU_IF);
-	cpu_mask = readl_relaxed(dist_base + GIC_DIST_TARGET + 0);
+	cpu_mask = gic_get_cpumask(gic);
 	gic_cpu_map[cpu] = cpu_mask;
 
 	/*

trunk/arch/arm/include/asm/memory.h

@@ -37,7 +37,7 @@
  */
 #define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
 #define TASK_SIZE		(UL(CONFIG_PAGE_OFFSET) - UL(0x01000000))
-#define TASK_UNMAPPED_BASE	(UL(CONFIG_PAGE_OFFSET) / 3)
+#define TASK_UNMAPPED_BASE	ALIGN(TASK_SIZE / 3, SZ_16M)
 
 /*
  * The maximum size of a 26-bit user space task.

trunk/arch/arm/include/asm/smp_scu.h

@@ -7,8 +7,14 @@
 
 #ifndef __ASSEMBLER__
 unsigned int scu_get_core_count(void __iomem *);
-void scu_enable(void __iomem *);
 int scu_power_mode(void __iomem *, unsigned int);
+
+#ifdef CONFIG_SMP
+void scu_enable(void __iomem *scu_base);
+#else
+static inline void scu_enable(void __iomem *scu_base) {}
+#endif
+
 #endif
 
 #endif