---

yaml
---
r: 95920
b: refs/heads/master
c: d13ff31
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 2905474d3842bfab0b9d8197fb1f4576462901da
+refs/heads/master: d13ff31cfeedbf2fefc7ba13cb753775648eac0c

trunk/Documentation/powerpc/mpc52xx-device-tree-bindings.txt

@@ -237,17 +237,6 @@ Each GPIO controller node should have the empty property gpio-controller and
 according to the bit numbers in the GPIO control registers. The second cell
 is for flags which is currently unsused.
 
-8) FEC nodes
-The FEC node can specify one of the following properties to configure
-the MII link:
-"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire
-                    mode instead of MII
-"current-speed"   - Specifies that the MII should be configured for a fixed
-                    speed.  This property should contain two cells.  The
-                    first cell specifies the speed in Mbps and the second
-                    should be '0' for half duplex and '1' for full duplex
-"phy-handle"      - Contains a phandle to an Ethernet PHY.
-
 IV - Extra Notes
 ================
 

trunk/Documentation/scsi/ChangeLog.megaraid_sas

@@ -1,25 +1,3 @@
-1 Release Date    : Mon. March 10 11:02:31 PDT 2008 -
-			(emaild-id:megaraidlinux@lsi.com)
-			Sumant Patro
-			Bo Yang
-
-2 Current Version : 00.00.03.20-RC1
-3 Older Version   : 00.00.03.16
-
-1. Rollback the sense info implementation
-	Sense buffer ptr data type in the ioctl path is reverted back
-	to u32 * as in previous versions of driver.
-
-2. Fixed the driver frame count.
-	When Driver sent wrong frame count to firmware.  As this
-	particular command is sent to drive, FW is seeing continuous
-	chip resets and so the command will timeout.
-
-3. Add the new controller(1078DE) support to the driver
-	and Increase the max_wait to 60 from 10 in the controller
-	operational status.  With this max_wait increase, driver will
-	make sure the FW will 	finish the pending cmd for KDUMP case.
-
 1 Release Date    : Thur. Nov. 07 16:30:43 PST 2007 -
 			(emaild-id:megaraidlinux@lsi.com)
 			Sumant Patro

trunk/Documentation/vm/slabinfo.c

@@ -38,7 +38,7 @@ struct slabinfo {
 	unsigned long alloc_from_partial, alloc_slab, free_slab, alloc_refill;
 	unsigned long cpuslab_flush, deactivate_full, deactivate_empty;
 	unsigned long deactivate_to_head, deactivate_to_tail;
-	unsigned long deactivate_remote_frees, order_fallback;
+	unsigned long deactivate_remote_frees;
 	int numa[MAX_NODES];
 	int numa_partial[MAX_NODES];
 } slabinfo[MAX_SLABS];
@@ -293,7 +293,7 @@ int line = 0;
 void first_line(void)
 {
 	if (show_activity)
-		printf("Name                   Objects      Alloc       Free   %%Fast Fallb O\n");
+		printf("Name                   Objects    Alloc     Free   %%Fast\n");
 	else
 		printf("Name                   Objects Objsize    Space "
 			"Slabs/Part/Cpu  O/S O %%Fr %%Ef Flg\n");
@@ -573,12 +573,11 @@ void slabcache(struct slabinfo *s)
 		total_alloc = s->alloc_fastpath + s->alloc_slowpath;
 		total_free = s->free_fastpath + s->free_slowpath;
 
-		printf("%-21s %8ld %10ld %10ld %3ld %3ld %5ld %1d\n",
+		printf("%-21s %8ld %8ld %8ld %3ld %3ld \n",
 			s->name, s->objects,
 			total_alloc, total_free,
 			total_alloc ? (s->alloc_fastpath * 100 / total_alloc) : 0,
-			total_free ? (s->free_fastpath * 100 / total_free) : 0,
-			s->order_fallback, s->order);
+			total_free ? (s->free_fastpath * 100 / total_free) : 0);
 	}
 	else
 		printf("%-21s %8ld %7d %8s %14s %4d %1d %3ld %3ld %s\n",
@@ -1189,7 +1188,6 @@ void read_slab_dir(void)
 			slab->deactivate_to_head = get_obj("deactivate_to_head");
 			slab->deactivate_to_tail = get_obj("deactivate_to_tail");
 			slab->deactivate_remote_frees = get_obj("deactivate_remote_frees");
-			slab->order_fallback = get_obj("order_fallback");
 			chdir("..");
 			if (slab->name[0] == ':')
 				alias_targets++;

trunk/MAINTAINERS

@@ -3130,7 +3130,7 @@ PCI SUBSYSTEM
 P:	Jesse Barnes
 M:	jbarnes@virtuousgeek.org
 L:	linux-kernel@vger.kernel.org
-L:	linux-pci@vger.kernel.org
+L:	linux-pci@atrey.karlin.mff.cuni.cz
 T:	git kernel.org:/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
 S:	Supported
 

trunk/arch/powerpc/boot/dts/mpc8610_hpcd.dts

@@ -21,7 +21,6 @@
 		serial1 = &serial1;
 		pci0 = &pci0;
 		pci1 = &pci1;
-		pci2 = &pci2;
 	};
 
 	cpus {
@@ -106,7 +105,7 @@
 			compatible = "ns16550";
 			reg = <0x4600 0x100>;
 			clock-frequency = <0>;
-			interrupts = <42 2>;
+			interrupts = <28 2>;
 			interrupt-parent = <&mpic>;
 		};
 
@@ -323,24 +322,4 @@
 			};
 		};
 	};
-
-	pci2: pcie@e0009000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		#interrupt-cells = <1>;
-		device_type = "pci";
-		compatible = "fsl,mpc8641-pcie";
-		reg = <0xe0009000 0x00001000>;
-		ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
-			  0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
-		bus-range = <0 255>;
-		interrupt-map-mask = <0xf800 0 0 7>;
-		interrupt-map = <0x0000 0 0 1 &mpic 4 1
-				 0x0000 0 0 2 &mpic 5 1
-				 0x0000 0 0 3 &mpic 6 1
-				 0x0000 0 0 4 &mpic 7 1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <25 2>;
-		clock-frequency = <33333333>;
-	};
 };