Merge remote branch 'airlied/drm-next' into drm-intel-next

Documentation/i2c/busses/i2c-piix4

@@ -8,7 +8,7 @@ Supported adapters:
     Datasheet: Only available via NDA from ServerWorks
   * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
     Datasheet: Not publicly available
-  * AMD SB900
+  * AMD Hudson-2
     Datasheet: Not publicly available
   * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
     Datasheet: Publicly available at the SMSC website http://www.smsc.com

MAINTAINERS

@@ -3665,6 +3665,7 @@ L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 W:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
 S:	Maintained
 F:	net/
 F:	include/net/

arch/m32r/boot/compressed/Makefile

@@ -1,5 +1,5 @@
 #
-# linux/arch/sh/boot/compressed/Makefile
+# linux/arch/m32r/boot/compressed/Makefile
 #
 # create a compressed vmlinux image from the original vmlinux
 #
@@ -47,5 +47,5 @@ suffix_$(CONFIG_KERNEL_GZIP)	= gz
 suffix_$(CONFIG_KERNEL_BZIP2)	= bz2
 suffix_$(CONFIG_KERNEL_LZMA)	= lzma
 
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
 	$(call if_changed,ld)

arch/powerpc/Kconfig

@@ -414,6 +414,10 @@ config ARCH_SPARSEMEM_DEFAULT
 config ARCH_POPULATES_NODE_MAP
 	def_bool y
 
+config SYS_SUPPORTS_HUGETLBFS
+       def_bool y
+       depends on PPC_BOOK3S_64
+
 source "mm/Kconfig"
 
 config ARCH_MEMORY_PROBE

arch/powerpc/kernel/time.c

@@ -777,7 +777,7 @@ int update_persistent_clock(struct timespec now)
 	return ppc_md.set_rtc_time(&tm);
 }
 
-void read_persistent_clock(struct timespec *ts)
+static void __read_persistent_clock(struct timespec *ts)
 {
 	struct rtc_time tm;
 	static int first = 1;
@@ -800,10 +800,23 @@ void read_persistent_clock(struct timespec *ts)
 		return;
 	}
 	ppc_md.get_rtc_time(&tm);
+
 	ts->tv_sec = mktime(tm.tm_year+1900, tm.tm_mon+1, tm.tm_mday,
 			    tm.tm_hour, tm.tm_min, tm.tm_sec);
 }
 
+void read_persistent_clock(struct timespec *ts)
+{
+	__read_persistent_clock(ts);
+
+	/* Sanitize it in case real time clock is set below EPOCH */
+	if (ts->tv_sec < 0) {
+		ts->tv_sec = 0;
+		ts->tv_nsec = 0;
+	}
+
+}
+
 /* clocksource code */
 static cycle_t rtc_read(struct clocksource *cs)
 {

arch/powerpc/kvm/timing.h

@@ -48,7 +48,11 @@ static inline void kvmppc_set_exit_type(struct kvm_vcpu *vcpu, int type) {}
 static inline void kvmppc_account_exit_stat(struct kvm_vcpu *vcpu, int type)
 {
 	/* type has to be known at build time for optimization */
+
+	/* The BUILD_BUG_ON below breaks in funny ways, commented out
+	 * for now ... -BenH
 	BUILD_BUG_ON(__builtin_constant_p(type));
+	*/
 	switch (type) {
 	case EXT_INTR_EXITS:
 		vcpu->stat.ext_intr_exits++;

arch/powerpc/mm/mmu_context_nohash.c

@@ -25,8 +25,8 @@
  *     also clear mm->cpu_vm_mask bits when processes are migrated
  */
 
-#define DEBUG_MAP_CONSISTENCY
-#define DEBUG_CLAMP_LAST_CONTEXT   31
+//#define DEBUG_MAP_CONSISTENCY
+//#define DEBUG_CLAMP_LAST_CONTEXT   31
 //#define DEBUG_HARDER
 
 /* We don't use DEBUG because it tends to be compiled in always nowadays

arch/powerpc/platforms/pseries/msi.c

@@ -432,8 +432,6 @@ static int rtas_setup_msi_irqs(struct pci_dev *pdev, int nvec, int type)
 		/* Read config space back so we can restore after reset */
 		read_msi_msg(virq, &msg);
 		entry->msg = msg;
-
-		unmask_msi_irq(virq);
 	}
 
 	return 0;

arch/powerpc/platforms/pseries/xics.c

@@ -18,6 +18,7 @@
 #include <linux/init.h>
 #include <linux/radix-tree.h>
 #include <linux/cpu.h>
+#include <linux/msi.h>
 #include <linux/of.h>
 
 #include <asm/firmware.h>
@@ -219,6 +220,14 @@ static void xics_unmask_irq(unsigned int virq)
 
 static unsigned int xics_startup(unsigned int virq)
 {
+	/*
+	 * The generic MSI code returns with the interrupt disabled on the
+	 * card, using the MSI mask bits. Firmware doesn't appear to unmask
+	 * at that level, so we do it here by hand.
+	 */
+	if (irq_to_desc(virq)->msi_desc)
+		unmask_msi_irq(virq);
+
 	/* unmask it */
 	xics_unmask_irq(virq);
 	return 0;

arch/sh/include/asm/rwsem.h

@@ -41,7 +41,7 @@ struct rw_semaphore {
 #endif
 
 #define __RWSEM_INITIALIZER(name) \
-	{ RWSEM_UNLOCKED_VALUE, SPIN_LOCK_UNLOCKED, \
+	{ RWSEM_UNLOCKED_VALUE, __SPIN_LOCK_UNLOCKED((name).wait_lock), \
 	  LIST_HEAD_INIT((name).wait_list) \
 	  __RWSEM_DEP_MAP_INIT(name) }
 

arch/sh/kernel/dwarf.c

@@ -555,7 +555,7 @@ struct dwarf_frame * dwarf_unwind_stack(unsigned long pc,
 	 * NOTE: the return address is guaranteed to be setup by the
 	 * time this function makes its first function call.
 	 */
-	if (!pc && !prev)
+	if (!pc || !prev)
 		pc = (unsigned long)current_text_addr();
 
 #ifdef CONFIG_FUNCTION_GRAPH_TRACER

arch/sh/mm/cache-sh4.c

@@ -72,15 +72,18 @@ static void __uses_jump_to_uncached sh4_flush_icache_range(void *args)
 
 	for (v = start; v < end; v += L1_CACHE_BYTES) {
 		unsigned long icacheaddr;
+		int j, n;
 
 		__ocbwb(v);
 
 		icacheaddr = CACHE_IC_ADDRESS_ARRAY | (v &
 				cpu_data->icache.entry_mask);
 
 		/* Clear i-cache line valid-bit */
+		n = boot_cpu_data.icache.n_aliases;
 		for (i = 0; i < cpu_data->icache.ways; i++) {
-			__raw_writel(0, icacheaddr);
+			for (j = 0; j < n; j++)
+				__raw_writel(0, icacheaddr + (j * PAGE_SIZE));
 			icacheaddr += cpu_data->icache.way_incr;
 		}
 	}

arch/sparc/include/asm/system_64.h

@@ -63,6 +63,10 @@ do {	__asm__ __volatile__("ba,pt	%%xcc, 1f\n\t" \
 			     : : : "memory"); \
 } while (0)
 
+/* The kernel always executes in TSO memory model these days,
+ * and furthermore most sparc64 chips implement more stringent
+ * memory ordering than required by the specifications.
+ */
 #define mb()	membar_safe("#StoreLoad")
 #define rmb()	__asm__ __volatile__("":::"memory")
 #define wmb()	__asm__ __volatile__("":::"memory")

arch/sparc/kernel/prom_common.c

@@ -79,6 +79,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len
 
 	err = -ENODEV;
 
+	mutex_lock(&of_set_property_mutex);
 	write_lock(&devtree_lock);
 	prevp = &dp->properties;
 	while (*prevp) {
@@ -88,9 +89,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len
 			void *old_val = prop->value;
 			int ret;
 
-			mutex_lock(&of_set_property_mutex);
 			ret = prom_setprop(dp->node, name, val, len);
-			mutex_unlock(&of_set_property_mutex);
 
 			err = -EINVAL;
 			if (ret >= 0) {
@@ -109,6 +108,7 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len
 		prevp = &(*prevp)->next;
 	}
 	write_unlock(&devtree_lock);
+	mutex_unlock(&of_set_property_mutex);
 
 	/* XXX Upate procfs if necessary... */
 

arch/sparc/kernel/visemul.c

@@ -617,7 +617,7 @@ static void pmul(struct pt_regs *regs, unsigned int insn, unsigned int opf)
 		rs2 = fps_regval(f, RS2(insn));
 
 		rd_val = 0;
-		src2 = (rs2 >> (opf == FMUL8x16AU_OPF) ? 16 : 0);
+		src2 = rs2 >> (opf == FMUL8x16AU_OPF ? 16 : 0);
 		for (byte = 0; byte < 4; byte++) {
 			u16 src1 = (rs1 >> (byte * 8)) & 0x00ff;
 			u32 prod = src1 * src2;

arch/x86/include/asm/desc.h

@@ -288,7 +288,7 @@ static inline void load_LDT(mm_context_t *pc)
 
 static inline unsigned long get_desc_base(const struct desc_struct *desc)
 {
-	return desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24);
+	return (unsigned)(desc->base0 | ((desc->base1) << 16) | ((desc->base2) << 24));
 }
 
 static inline void set_desc_base(struct desc_struct *desc, unsigned long base)

arch/x86/kvm/x86.c

@@ -1692,7 +1692,7 @@ static int kvm_vcpu_ioctl_x86_setup_mce(struct kvm_vcpu *vcpu,
 	unsigned bank_num = mcg_cap & 0xff, bank;
 
 	r = -EINVAL;
-	if (!bank_num)
+	if (!bank_num || bank_num >= KVM_MAX_MCE_BANKS)
 		goto out;
 	if (mcg_cap & ~(KVM_MCE_CAP_SUPPORTED | 0xff | 0xff0000))
 		goto out;
@@ -4051,7 +4051,7 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector,
 	return kvm_write_guest_virt(dtable.base + index*8, seg_desc, sizeof(*seg_desc), vcpu);
 }
 
-static u32 get_tss_base_addr(struct kvm_vcpu *vcpu,
+static gpa_t get_tss_base_addr(struct kvm_vcpu *vcpu,
 			     struct desc_struct *seg_desc)
 {
 	u32 base_addr = get_desc_base(seg_desc);

drivers/acpi/acpica/acconfig.h

@@ -103,9 +103,9 @@
 
 #define ACPI_MAX_REFERENCE_COUNT        0x1000
 
-/* Size of cached memory mapping for system memory operation region */
+/* Default page size for use in mapping memory for operation regions */
 
-#define ACPI_SYSMEM_REGION_WINDOW_SIZE  4096
+#define ACPI_DEFAULT_PAGE_SIZE          4096	/* Must be power of 2 */
 
 /* owner_id tracking. 8 entries allows for 255 owner_ids */
 

drivers/acpi/acpica/exregion.c

@@ -77,7 +77,8 @@ acpi_ex_system_memory_space_handler(u32 function,
 	void *logical_addr_ptr = NULL;
 	struct acpi_mem_space_context *mem_info = region_context;
 	u32 length;
-	acpi_size window_size;
+	acpi_size map_length;
+	acpi_size page_boundary_map_length;
 #ifdef ACPI_MISALIGNMENT_NOT_SUPPORTED
 	u32 remainder;
 #endif
@@ -144,33 +145,47 @@ acpi_ex_system_memory_space_handler(u32 function,
 		}
 
 		/*
-		 * Don't attempt to map memory beyond the end of the region, and
-		 * constrain the maximum mapping size to something reasonable.
+		 * Attempt to map from the requested address to the end of the region.
+		 * However, we will never map more than one page, nor will we cross
+		 * a page boundary.
 		 */
-		window_size = (acpi_size)
+		map_length = (acpi_size)
 		    ((mem_info->address + mem_info->length) - address);
 
-		if (window_size > ACPI_SYSMEM_REGION_WINDOW_SIZE) {
-			window_size = ACPI_SYSMEM_REGION_WINDOW_SIZE;
+		/*
+		 * If mapping the entire remaining portion of the region will cross
+		 * a page boundary, just map up to the page boundary, do not cross.
+		 * On some systems, crossing a page boundary while mapping regions
+		 * can cause warnings if the pages have different attributes
+		 * due to resource management
+		 */
+		page_boundary_map_length =
+		    ACPI_ROUND_UP(address, ACPI_DEFAULT_PAGE_SIZE) - address;
+
+		if (!page_boundary_map_length) {
+			page_boundary_map_length = ACPI_DEFAULT_PAGE_SIZE;
+		}
+
+		if (map_length > page_boundary_map_length) {
+			map_length = page_boundary_map_length;
 		}
 
 		/* Create a new mapping starting at the address given */
 
-		mem_info->mapped_logical_address =
-			acpi_os_map_memory((acpi_physical_address) address, window_size);
+		mem_info->mapped_logical_address = acpi_os_map_memory((acpi_physical_address) address, map_length);
 		if (!mem_info->mapped_logical_address) {
 			ACPI_ERROR((AE_INFO,
 				    "Could not map memory at %8.8X%8.8X, size %X",
 				    ACPI_FORMAT_NATIVE_UINT(address),
-				    (u32) window_size));
+				    (u32) map_length));
 			mem_info->mapped_length = 0;
 			return_ACPI_STATUS(AE_NO_MEMORY);
 		}
 
 		/* Save the physical address and mapping size */
 
 		mem_info->mapped_physical_address = address;
-		mem_info->mapped_length = window_size;
+		mem_info->mapped_length = map_length;
 	}
 
 	/*

drivers/acpi/power_meter.c

@@ -294,7 +294,11 @@ static int set_acpi_trip(struct acpi_power_meter_resource *resource)
 		return -EINVAL;
 	}
 
-	return data;
+	/* _PTP returns 0 on success, nonzero otherwise */
+	if (data)
+		return -EINVAL;
+
+	return 0;
 }
 
 static ssize_t set_trip(struct device *dev, struct device_attribute *devattr,

drivers/acpi/proc.c

@@ -393,7 +393,7 @@ acpi_system_write_wakeup_device(struct file *file,
 	struct list_head *node, *next;
 	char strbuf[5];
 	char str[5] = "";
-	int len = count;
+	unsigned int len = count;
 	struct acpi_device *found_dev = NULL;
 
 	if (len > 4)

drivers/acpi/processor_core.c

@@ -770,7 +770,7 @@ static struct notifier_block acpi_cpu_notifier =
 	    .notifier_call = acpi_cpu_soft_notify,
 };
 
-static int acpi_processor_add(struct acpi_device *device)
+static int __cpuinit acpi_processor_add(struct acpi_device *device)
 {
 	struct acpi_processor *pr = NULL;
 	int result = 0;

drivers/acpi/processor_throttling.c

@@ -1133,15 +1133,15 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr)
 	int result = 0;
 	struct acpi_processor_throttling *pthrottling;
 
+	if (!pr)
+		return -EINVAL;
+
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 			  "pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
 			  pr->throttling.address,
 			  pr->throttling.duty_offset,
 			  pr->throttling.duty_width));
 
-	if (!pr)
-		return -EINVAL;
-
 	/*
 	 * Evaluate _PTC, _TSS and _TPC
 	 * They must all be present or none of them can be used.