Merge branch 'pm-cpufreq'

* pm-cpufreq:
  cpufreq: Don't use smp_processor_id() in preemptible context
  cpufreq: governor: Fix typos in comments
  cpufreq: governors: Remove duplicate check of target freq in supported range
  cpufreq: Fix timer/workqueue corruption due to double queueing
  cpufreq: imx6q: Fix clock enable balance
  cpufreq: tegra: fix the wrong clock name

drivers/cpufreq/cpufreq_conservative.c

@@ -67,8 +67,6 @@ static void cs_check_cpu(int cpu, unsigned int load)
 			return;
 
 		dbs_info->requested_freq += get_freq_target(cs_tuners, policy);
-		if (dbs_info->requested_freq > policy->max)
-			dbs_info->requested_freq = policy->max;
 
 		__cpufreq_driver_target(policy, dbs_info->requested_freq,
 			CPUFREQ_RELATION_H);
@@ -89,8 +87,6 @@ static void cs_check_cpu(int cpu, unsigned int load)
 			return;
 
 		dbs_info->requested_freq -= get_freq_target(cs_tuners, policy);
-		if (dbs_info->requested_freq < policy->min)
-			dbs_info->requested_freq = policy->min;
 
 		__cpufreq_driver_target(policy, dbs_info->requested_freq,
 				CPUFREQ_RELATION_L);

drivers/cpufreq/cpufreq_governor.c

@@ -119,8 +119,18 @@ void gov_queue_work(struct dbs_data *dbs_data, struct cpufreq_policy *policy,
 {
 	int i;
 
+	if (!policy->governor_enabled)
+		return;
+
 	if (!all_cpus) {
-		__gov_queue_work(smp_processor_id(), dbs_data, delay);
+		/*
+		 * Use raw_smp_processor_id() to avoid preemptible warnings.
+		 * We know that this is only called with all_cpus == false from
+		 * works that have been queued with *_work_on() functions and
+		 * those works are canceled during CPU_DOWN_PREPARE so they
+		 * can't possibly run on any other CPU.
+		 */
+		__gov_queue_work(raw_smp_processor_id(), dbs_data, delay);
 	} else {
 		for_each_cpu(i, policy->cpus)
 			__gov_queue_work(i, dbs_data, delay);
@@ -230,7 +240,7 @@ int cpufreq_governor_dbs(struct cpufreq_policy *policy,
 
 		policy->governor_data = dbs_data;
 
-		/* policy latency is in nS. Convert it to uS first */
+		/* policy latency is in ns. Convert it to us first */
 		latency = policy->cpuinfo.transition_latency / 1000;
 		if (latency == 0)
 			latency = 1;

drivers/cpufreq/cpufreq_governor.h

@@ -25,11 +25,11 @@
 /*
  * The polling frequency depends on the capability of the processor. Default
  * polling frequency is 1000 times the transition latency of the processor. The
- * governor will work on any processor with transition latency <= 10mS, using
+ * governor will work on any processor with transition latency <= 10ms, using
  * appropriate sampling rate.
  *
- * For CPUs with transition latency > 10mS (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work. All times here are in uS.
+ * For CPUs with transition latency > 10ms (mostly drivers with CPUFREQ_ETERNAL)
+ * this governor will not work. All times here are in us (micro seconds).
  */
 #define MIN_SAMPLING_RATE_RATIO			(2)
 #define LATENCY_MULTIPLIER			(1000)
@@ -162,7 +162,7 @@ struct cs_cpu_dbs_info_s {
 	unsigned int enable:1;
 };
 
-/* Per policy Governers sysfs tunables */
+/* Per policy Governors sysfs tunables */
 struct od_dbs_tuners {
 	unsigned int ignore_nice_load;
 	unsigned int sampling_rate;
@@ -181,7 +181,7 @@ struct cs_dbs_tuners {
 	unsigned int freq_step;
 };
 
-/* Common Governer data across policies */
+/* Common Governor data across policies */
 struct dbs_data;
 struct common_dbs_data {
 	/* Common across governors */
@@ -205,7 +205,7 @@ struct common_dbs_data {
 	void *gov_ops;
 };
 
-/* Governer Per policy data */
+/* Governor Per policy data */
 struct dbs_data {
 	struct common_dbs_data *cdata;
 	unsigned int min_sampling_rate;

drivers/cpufreq/cpufreq_ondemand.c

@@ -177,9 +177,6 @@ static void od_check_cpu(int cpu, unsigned int load)
 		/* No longer fully busy, reset rate_mult */
 		dbs_info->rate_mult = 1;
 
-		if (freq_next < policy->min)
-			freq_next = policy->min;
-
 		if (!od_tuners->powersave_bias) {
 			__cpufreq_driver_target(policy, freq_next,
 					CPUFREQ_RELATION_L);

drivers/cpufreq/imx6q-cpufreq.c

@@ -117,28 +117,11 @@ static int imx6q_set_target(struct cpufreq_policy *policy,
 	 *  - Reprogram pll1_sys_clk and reparent pll1_sw_clk back to it
 	 *  - Disable pll2_pfd2_396m_clk
 	 */
-	clk_prepare_enable(pll2_pfd2_396m_clk);
 	clk_set_parent(step_clk, pll2_pfd2_396m_clk);
 	clk_set_parent(pll1_sw_clk, step_clk);
 	if (freq_hz > clk_get_rate(pll2_pfd2_396m_clk)) {
 		clk_set_rate(pll1_sys_clk, freqs.new * 1000);
-		/*
-		 * If we are leaving 396 MHz set-point, we need to enable
-		 * pll1_sys_clk and disable pll2_pfd2_396m_clk to keep
-		 * their use count correct.
-		 */
-		if (freqs.old * 1000 <= clk_get_rate(pll2_pfd2_396m_clk)) {
-			clk_prepare_enable(pll1_sys_clk);
-			clk_disable_unprepare(pll2_pfd2_396m_clk);
-		}
 		clk_set_parent(pll1_sw_clk, pll1_sys_clk);
-		clk_disable_unprepare(pll2_pfd2_396m_clk);
-	} else {
-		/*
-		 * Disable pll1_sys_clk if pll2_pfd2_396m_clk is sufficient
-		 * to provide the frequency.
-		 */
-		clk_disable_unprepare(pll1_sys_clk);
 	}
 
 	/* Ensure the arm clock divider is what we expect */

drivers/cpufreq/tegra-cpufreq.c

@@ -255,15 +255,15 @@ static struct cpufreq_driver tegra_cpufreq_driver = {
 
 static int __init tegra_cpufreq_init(void)
 {
-	cpu_clk = clk_get_sys(NULL, "cpu");
+	cpu_clk = clk_get_sys(NULL, "cclk");
 	if (IS_ERR(cpu_clk))
 		return PTR_ERR(cpu_clk);
 
 	pll_x_clk = clk_get_sys(NULL, "pll_x");
 	if (IS_ERR(pll_x_clk))
 		return PTR_ERR(pll_x_clk);
 
-	pll_p_clk = clk_get_sys(NULL, "pll_p_cclk");
+	pll_p_clk = clk_get_sys(NULL, "pll_p");
 	if (IS_ERR(pll_p_clk))
 		return PTR_ERR(pll_p_clk);