---

yaml
---
r: 242727
b: refs/heads/master
c: dc50edd
h: refs/heads/master
i:
  242725: 9f15145
  242723: 271d0b5
  242719: 7591a80
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: cf55bb2439d2a7080fae6edf84919fd81f891574
+refs/heads/master: dc50eddb2f3a0dff365f093b2a93fb4ab4dd4389

trunk/Documentation/ABI/testing/sysfs-fs-ext4

@@ -48,7 +48,7 @@ Description:
 		 will have its blocks allocated out of its own unique
 		 preallocation pool.
 
-What:		/sys/fs/ext4/<disk>/inode_readahead
+What:		/sys/fs/ext4/<disk>/inode_readahead_blks
 Date:		March 2008
 Contact:	"Theodore Ts'o" <tytso@mit.edu>
 Description:
@@ -85,7 +85,14 @@ Date:		June 2008
 Contact:	"Theodore Ts'o" <tytso@mit.edu>
 Description:
 		Tuning parameter which (if non-zero) controls the goal
-		inode used by the inode allocator in p0reference to
-		all other allocation hueristics.  This is intended for
+		inode used by the inode allocator in preference to
+		all other allocation heuristics.  This is intended for
 		debugging use only, and should be 0 on production
 		systems.
+
+What:		/sys/fs/ext4/<disk>/max_writeback_mb_bump
+Date:		September 2009
+Contact:	"Theodore Ts'o" <tytso@mit.edu>
+Description:
+		The maximum number of megabytes the writeback code will
+		try to write out before move on to another inode.

trunk/Documentation/device-mapper/dm-flakey.txt

@@ -0,0 +1,17 @@
+dm-flakey
+=========
+
+This target is the same as the linear target except that it returns I/O
+errors periodically.  It's been found useful in simulating failing
+devices for testing purposes.
+
+Starting from the time the table is loaded, the device is available for
+<up interval> seconds, then returns errors for <down interval> seconds,
+and then this cycle repeats.
+
+Parameters: <dev path> <offset> <up interval> <down interval>
+    <dev path>: Full pathname to the underlying block-device, or a
+                "major:minor" device-number.
+    <offset>: Starting sector within the device.
+    <up interval>: Number of seconds device is available.
+    <down interval>: Number of seconds device returns errors.

trunk/Documentation/filesystems/Locking

@@ -128,7 +128,7 @@ alloc_inode:
 destroy_inode:
 dirty_inode:				(must not sleep)
 write_inode:
-drop_inode:				!!!inode_lock!!!
+drop_inode:				!!!inode->i_lock!!!
 evict_inode:
 put_super:		write
 write_super:		read

trunk/Documentation/filesystems/ext4.txt

@@ -367,12 +367,47 @@ init_itable=n		The lazy itable init code will wait n times the
 			minimizes the impact on the systme performance
 			while file system's inode table is being initialized.
 
-discard		Controls whether ext4 should issue discard/TRIM
+discard			Controls whether ext4 should issue discard/TRIM
 nodiscard(*)		commands to the underlying block device when
 			blocks are freed.  This is useful for SSD devices
 			and sparse/thinly-provisioned LUNs, but it is off
 			by default until sufficient testing has been done.
 
+nouid32			Disables 32-bit UIDs and GIDs.  This is for
+			interoperability  with  older kernels which only
+			store and expect 16-bit values.
+
+resize			Allows to resize filesystem to the end of the last
+			existing block group, further resize has to be done
+			with resize2fs either online, or offline. It can be
+			used only with conjunction with remount.
+
+block_validity		This options allows to enables/disables the in-kernel
+noblock_validity	facility for tracking filesystem metadata blocks
+			within internal data structures. This allows multi-
+			block allocator and other routines to quickly locate
+			extents which might overlap with filesystem metadata
+			blocks. This option is intended for debugging
+			purposes and since it negatively affects the
+			performance, it is off by default.
+
+dioread_lock		Controls whether or not ext4 should use the DIO read
+dioread_nolock		locking. If the dioread_nolock option is specified
+			ext4 will allocate uninitialized extent before buffer
+			write and convert the extent to initialized after IO
+			completes. This approach allows ext4 code to avoid
+			using inode mutex, which improves scalability on high
+			speed storages. However this does not work with nobh
+			option and the mount will fail. Nor does it work with
+			data journaling and dioread_nolock option will be
+			ignored with kernel warning. Note that dioread_nolock
+			code path is only used for extent-based files.
+			Because of the restrictions this options comprises
+			it is off by default (e.g. dioread_lock).
+
+i_version		Enable 64-bit inode version support. This option is
+			off by default.
+
 Data Mode
 =========
 There are 3 different data modes:
@@ -400,6 +435,176 @@ needs to be read from and written to disk at the same time where it
 outperforms all others modes.  Currently ext4 does not have delayed
 allocation support if this data journalling mode is selected.
 
+/proc entries
+=============
+
+Information about mounted ext4 file systems can be found in
+/proc/fs/ext4.  Each mounted filesystem will have a directory in
+/proc/fs/ext4 based on its device name (i.e., /proc/fs/ext4/hdc or
+/proc/fs/ext4/dm-0).   The files in each per-device directory are shown
+in table below.
+
+Files in /proc/fs/ext4/<devname>
+..............................................................................
+ File            Content
+ mb_groups       details of multiblock allocator buddy cache of free blocks
+..............................................................................
+
+/sys entries
+============
+
+Information about mounted ext4 file systems can be found in
+/sys/fs/ext4.  Each mounted filesystem will have a directory in
+/sys/fs/ext4 based on its device name (i.e., /sys/fs/ext4/hdc or
+/sys/fs/ext4/dm-0).   The files in each per-device directory are shown
+in table below.
+
+Files in /sys/fs/ext4/<devname>
+(see also Documentation/ABI/testing/sysfs-fs-ext4)
+..............................................................................
+ File                         Content
+
+ delayed_allocation_blocks    This file is read-only and shows the number of
+                              blocks that are dirty in the page cache, but
+                              which do not have their location in the
+                              filesystem allocated yet.
+
+ inode_goal                   Tuning parameter which (if non-zero) controls
+                              the goal inode used by the inode allocator in
+                              preference to all other allocation heuristics.
+                              This is intended for debugging use only, and
+                              should be 0 on production systems.
+
+ inode_readahead_blks         Tuning parameter which controls the maximum
+                              number of inode table blocks that ext4's inode
+                              table readahead algorithm will pre-read into
+                              the buffer cache
+
+ lifetime_write_kbytes        This file is read-only and shows the number of
+                              kilobytes of data that have been written to this
+                              filesystem since it was created.
+
+ max_writeback_mb_bump        The maximum number of megabytes the writeback
+                              code will try to write out before move on to
+                              another inode.
+
+ mb_group_prealloc            The multiblock allocator will round up allocation
+                              requests to a multiple of this tuning parameter if
+                              the stripe size is not set in the ext4 superblock
+
+ mb_max_to_scan               The maximum number of extents the multiblock
+                              allocator will search to find the best extent
+
+ mb_min_to_scan               The minimum number of extents the multiblock
+                              allocator will search to find the best extent
+
+ mb_order2_req                Tuning parameter which controls the minimum size
+                              for requests (as a power of 2) where the buddy
+                              cache is used
+
+ mb_stats                     Controls whether the multiblock allocator should
+                              collect statistics, which are shown during the
+                              unmount. 1 means to collect statistics, 0 means
+                              not to collect statistics
+
+ mb_stream_req                Files which have fewer blocks than this tunable
+                              parameter will have their blocks allocated out
+                              of a block group specific preallocation pool, so
+                              that small files are packed closely together.
+                              Each large file will have its blocks allocated
+                              out of its own unique preallocation pool.
+
+ session_write_kbytes         This file is read-only and shows the number of
+                              kilobytes of data that have been written to this
+                              filesystem since it was mounted.
+..............................................................................
+
+Ioctls
+======
+
+There is some Ext4 specific functionality which can be accessed by applications
+through the system call interfaces. The list of all Ext4 specific ioctls are
+shown in the table below.
+
+Table of Ext4 specific ioctls
+..............................................................................
+ Ioctl			      Description
+ EXT4_IOC_GETFLAGS	      Get additional attributes associated with inode.
+			      The ioctl argument is an integer bitfield, with
+			      bit values described in ext4.h. This ioctl is an
+			      alias for FS_IOC_GETFLAGS.
+
+ EXT4_IOC_SETFLAGS	      Set additional attributes associated with inode.
+			      The ioctl argument is an integer bitfield, with
+			      bit values described in ext4.h. This ioctl is an
+			      alias for FS_IOC_SETFLAGS.
+
+ EXT4_IOC_GETVERSION
+ EXT4_IOC_GETVERSION_OLD
+			      Get the inode i_generation number stored for
+			      each inode. The i_generation number is normally
+			      changed only when new inode is created and it is
+			      particularly useful for network filesystems. The
+			      '_OLD' version of this ioctl is an alias for
+			      FS_IOC_GETVERSION.
+
+ EXT4_IOC_SETVERSION
+ EXT4_IOC_SETVERSION_OLD
+			      Set the inode i_generation number stored for
+			      each inode. The '_OLD' version of this ioctl
+			      is an alias for FS_IOC_SETVERSION.
+
+ EXT4_IOC_GROUP_EXTEND	      This ioctl has the same purpose as the resize
+			      mount option. It allows to resize filesystem
+			      to the end of the last existing block group,
+			      further resize has to be done with resize2fs,
+			      either online, or offline. The argument points
+			      to the unsigned logn number representing the
+			      filesystem new block count.
+
+ EXT4_IOC_MOVE_EXT	      Move the block extents from orig_fd (the one
+			      this ioctl is pointing to) to the donor_fd (the
+			      one specified in move_extent structure passed
+			      as an argument to this ioctl). Then, exchange
+			      inode metadata between orig_fd and donor_fd.
+			      This is especially useful for online
+			      defragmentation, because the allocator has the
+			      opportunity to allocate moved blocks better,
+			      ideally into one contiguous extent.
+
+ EXT4_IOC_GROUP_ADD	      Add a new group descriptor to an existing or
+			      new group descriptor block. The new group
+			      descriptor is described by ext4_new_group_input
+			      structure, which is passed as an argument to
+			      this ioctl. This is especially useful in
+			      conjunction with EXT4_IOC_GROUP_EXTEND,
+			      which allows online resize of the filesystem
+			      to the end of the last existing block group.
+			      Those two ioctls combined is used in userspace
+			      online resize tool (e.g. resize2fs).
+
+ EXT4_IOC_MIGRATE	      This ioctl operates on the filesystem itself.
+			      It converts (migrates) ext3 indirect block mapped
+			      inode to ext4 extent mapped inode by walking
+			      through indirect block mapping of the original
+			      inode and converting contiguous block ranges
+			      into ext4 extents of the temporary inode. Then,
+			      inodes are swapped. This ioctl might help, when
+			      migrating from ext3 to ext4 filesystem, however
+			      suggestion is to create fresh ext4 filesystem
+			      and copy data from the backup. Note, that
+			      filesystem has to support extents for this ioctl
+			      to work.
+
+ EXT4_IOC_ALLOC_DA_BLKS	      Force all of the delay allocated blocks to be
+			      allocated to preserve application-expected ext3
+			      behaviour. Note that this will also start
+			      triggering a write of the data blocks, but this
+			      behaviour may change in the future as it is
+			      not necessary and has been done this way only
+			      for sake of simplicity.
+..............................................................................
+
 References
 ==========
 

trunk/Documentation/filesystems/porting

@@ -298,11 +298,14 @@ be used instead.  It gets called whenever the inode is evicted, whether it has
 remaining links or not.  Caller does *not* evict the pagecache or inode-associated
 metadata buffers; getting rid of those is responsibility of method, as it had
 been for ->delete_inode().
-	->drop_inode() returns int now; it's called on final iput() with inode_lock
-held and it returns true if filesystems wants the inode to be dropped.  As before,
-generic_drop_inode() is still the default and it's been updated appropriately.
-generic_delete_inode() is also alive and it consists simply of return 1.  Note that
-all actual eviction work is done by caller after ->drop_inode() returns.
+
+	->drop_inode() returns int now; it's called on final iput() with
+inode->i_lock held and it returns true if filesystems wants the inode to be
+dropped.  As before, generic_drop_inode() is still the default and it's been
+updated appropriately.  generic_delete_inode() is also alive and it consists
+simply of return 1.  Note that all actual eviction work is done by caller after
+->drop_inode() returns.
+
 	clear_inode() is gone; use end_writeback() instead.  As before, it must
 be called exactly once on each call of ->evict_inode() (as it used to be for
 each call of ->delete_inode()).  Unlike before, if you are using inode-associated
@@ -395,6 +398,9 @@ Currently you can only have FALLOC_FL_PUNCH_HOLE with FALLOC_FL_KEEP_SIZE set,
 so the i_size should not change when hole punching, even when puching the end of
 a file off.
 
+--
+[mandatory]
+
 --
 [mandatory]
 	->get_sb() is gone.  Switch to use of ->mount().  Typically it's just

trunk/Documentation/filesystems/vfs.txt

@@ -254,7 +254,7 @@ or bottom half).
 	should be synchronous or not, not all filesystems check this flag.
 
   drop_inode: called when the last access to the inode is dropped,
-	with the inode_lock spinlock held.
+	with the inode->i_lock spinlock held.
 
 	This method should be either NULL (normal UNIX filesystem
 	semantics) or "generic_delete_inode" (for filesystems that do not

trunk/Documentation/scheduler/sched-design-CFS.txt

@@ -164,7 +164,7 @@ This is the (partial) list of the hooks:
    It puts the scheduling entity (task) into the red-black tree and
    increments the nr_running variable.
 
- - dequeue_tree(...)
+ - dequeue_task(...)
 
    When a task is no longer runnable, this function is called to keep the
    corresponding scheduling entity out of the red-black tree.  It decrements
@@ -195,11 +195,6 @@ This is the (partial) list of the hooks:
    This function is mostly called from time tick functions; it might lead to
    process switch.  This drives the running preemption.
 
- - task_new(...)
-
-   The core scheduler gives the scheduling module an opportunity to manage new
-   task startup.  The CFS scheduling module uses it for group scheduling, while
-   the scheduling module for a real-time task does not use it.