Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/…

…git/gregkh/usb-2.6

* 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (115 commits)
  EHCI: fix direction handling for interrupt data toggles
  USB: serial: add IDs for WinChipHead USB->RS232 adapter
  USB: OHCI: fix another regression for NVIDIA controllers
  usb: gadget: m66592-udc: add pullup function
  usb: gadget: m66592-udc: add function for external controller
  usb: gadget: r8a66597-udc: add pullup function
  usb: renesas_usbhs: support multi driver
  usb: renesas_usbhs: inaccessible pipe is not an error
  usb: renesas_usbhs: care buff alignment when dma handler
  USB: PL2303: correctly handle baudrates above 115200
  usb: r8a66597-hcd: fixup USB_PORT_STAT_C_SUSPEND shift
  usb: renesas_usbhs: compile/config are rescued
  usb: renesas_usbhs: fixup comment-out
  usb: update email address in ohci-sh and r8a66597-hcd
  usb: r8a66597-hcd: add function for external controller
  EHCI: only power off port if over-current is active
  USB: mon: Allow to use usbmon without debugfs
  USB: EHCI: go back to using the system clock for QH unlinks
  ehci: add pci quirk for Ordissimo and RM Slate 100 too
  ehci: refactor pci quirk to use standard dmi_check_system method
  ...

Fix up trivial conflicts in Documentation/feature-removal-schedule.txt

Documentation/ABI/testing/sysfs-module

@@ -10,3 +10,26 @@ KernelVersion:	2.6.35
 Contact:	masa-korg@dsn.okisemi.com
 Description:	Write/read Option ROM data.
 
+
+What:		/sys/module/ehci_hcd/drivers/.../uframe_periodic_max
+Date:		July 2011
+KernelVersion:	3.1
+Contact:	Kirill Smelkov <kirr@mns.spb.ru>
+Description:	Maximum time allowed for periodic transfers per microframe (μs)
+
+		[ USB 2.0 sets maximum allowed time for periodic transfers per
+		  microframe to be 80%, that is 100 microseconds out of 125
+		  microseconds (full microframe).
+
+		  However there are cases, when 80% max isochronous bandwidth is
+		  too limiting. For example two video streams could require 110
+		  microseconds of isochronous bandwidth per microframe to work
+		  together. ]
+
+		Through this setting it is possible to raise the limit so that
+		the host controller would allow allocating more than 100
+		microseconds of periodic bandwidth per microframe.
+
+		Beware, non-standard modes are usually not thoroughly tested by
+		hardware designers, and the hardware can malfunction when this
+		setting differ from default 100.

Documentation/feature-removal-schedule.txt

@@ -569,3 +569,10 @@ Why:	Just opening a V4L device should not change the state of the hardware
 Who:	Hans Verkuil <hans.verkuil@cisco.com>
 
 ----------------------------
+
+What:	g_file_storage driver
+When:	3.8
+Why:	This driver has been superseded by g_mass_storage.
+Who:	Alan Stern <stern@rowland.harvard.edu>
+
+----------------------------

Documentation/kernel-parameters.txt

@@ -2545,6 +2545,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 	unknown_nmi_panic
 			[X86] Cause panic on unknown NMI.
 
+	usbcore.authorized_default=
+			[USB] Default USB device authorization:
+			(default -1 = authorized except for wireless USB,
+			0 = not authorized, 1 = authorized)
+
 	usbcore.autosuspend=
 			[USB] The autosuspend time delay (in seconds) used
 			for newly-detected USB devices (default 2).  This

Documentation/usb/ehci.txt

@@ -210,3 +210,5 @@ TBD:  Interrupt and ISO transfer performance issues.  Those periodic
 transfers are fully scheduled, so the main issue is likely to be how
 to trigger "high bandwidth" modes.
 
+TBD:  More than standard 80% periodic bandwidth allocation is possible
+through sysfs uframe_periodic_max parameter. Describe that.

Documentation/usb/gadget_hid.txt

@@ -81,8 +81,8 @@ Send and receive HID reports
 	to do this.
 
 	hid_gadget_test is a small interactive program to test the HID
- 	gadget driver. To use, point it at a hidg device and set the
- 	device type (keyboard / mouse / joystick) - E.G.:
+	gadget driver. To use, point it at a hidg device and set the
+	device type (keyboard / mouse / joystick) - E.G.:
 
 		# hid_gadget_test /dev/hidg0 keyboard
 
@@ -97,7 +97,7 @@ Send and receive HID reports
 	HID gadget.
 
 	Another interesting example is the caps lock test. Type
-	-–caps-lock and hit return. A report is then sent by the
+	--caps-lock and hit return. A report is then sent by the
 	gadget and you should receive the host answer, corresponding
 	to the caps lock LED status.
 

arch/arm/mach-omap2/usb-musb.c

@@ -33,8 +33,6 @@
 #include <plat/omap_device.h>
 #include "mux.h"
 
-#if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X)
-
 static struct musb_hdrc_config musb_config = {
 	.multipoint	= 1,
 	.dyn_fifo	= 1,
@@ -175,11 +173,3 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	if (cpu_is_omap44xx())
 		omap4430_phy_init(dev);
 }
-
-#else
-void __init usb_musb_init(struct omap_musb_board_data *board_data)
-{
-	if (cpu_is_omap44xx())
-		omap4430_phy_init(NULL);
-}
-#endif /* CONFIG_USB_MUSB_SOC */

drivers/usb/atm/ueagle-atm.c

@@ -116,14 +116,14 @@ struct uea_cmvs_v1 {
 	u32 address;
 	u16 offset;
 	u32 data;
-} __attribute__ ((packed));
+} __packed;
 
 struct uea_cmvs_v2 {
 	u32 group;
 	u32 address;
 	u32 offset;
 	u32 data;
-} __attribute__ ((packed));
+} __packed;
 
 /* information about currently processed cmv */
 struct cmv_dsc_e1 {
@@ -352,7 +352,7 @@ struct block_index {
 	__le32 PageAddress;
 	__le16 dummy1;
 	__le16 PageNumber;
-} __attribute__ ((packed));
+} __packed;
 
 #define E4_IS_BOOT_PAGE(PageSize) ((le32_to_cpu(PageSize)) & 0x80000000)
 #define E4_PAGE_BYTES(PageSize) ((le32_to_cpu(PageSize) & 0x7fffffff) * 4)
@@ -367,7 +367,7 @@ struct l1_code {
 	u8 page_number_to_block_index[E4_MAX_PAGE_NUMBER];
 	struct block_index page_header[E4_NO_SWAPPAGE_HEADERS];
 	u8 code[0];
-} __attribute__ ((packed));
+} __packed;
 
 /* structures describing a block within a DSP page */
 struct block_info_e1 {
@@ -377,7 +377,7 @@ struct block_info_e1 {
 	__le16 wOvlOffset;
 	__le16 wOvl;		/* overlay */
 	__le16 wLast;
-} __attribute__ ((packed));
+} __packed;
 #define E1_BLOCK_INFO_SIZE 12
 
 struct block_info_e4 {
@@ -387,7 +387,7 @@ struct block_info_e4 {
 	__be32 dwSize;
 	__be32 dwAddress;
 	__be16 wReserved;
-} __attribute__ ((packed));
+} __packed;
 #define E4_BLOCK_INFO_SIZE 14
 
 #define UEA_BIHDR 0xabcd
@@ -467,25 +467,25 @@ struct cmv_e1 {
 	__le32 dwSymbolicAddress;
 	__le16 wOffsetAddress;
 	__le32 dwData;
-} __attribute__ ((packed));
+} __packed;
 
 struct cmv_e4 {
 	__be16 wGroup;
 	__be16 wFunction;
 	__be16 wOffset;
 	__be16 wAddress;
 	__be32 dwData[6];
-} __attribute__ ((packed));
+} __packed;
 
 /* structures representing swap information */
 struct swap_info_e1 {
 	__u8 bSwapPageNo;
 	__u8 bOvl;		/* overlay */
-} __attribute__ ((packed));
+} __packed;
 
 struct swap_info_e4 {
 	__u8 bSwapPageNo;
-} __attribute__ ((packed));
+} __packed;
 
 /* structures representing interrupt data */
 #define e1_bSwapPageNo	u.e1.s1.swapinfo.bSwapPageNo
@@ -499,23 +499,23 @@ union intr_data_e1 {
 	struct {
 		struct swap_info_e1 swapinfo;
 		__le16 wDataSize;
-	} __attribute__ ((packed)) s1;
+	} __packed s1;
 	struct {
 		struct cmv_e1 cmv;
 		__le16 wDataSize;
-	} __attribute__ ((packed)) s2;
-} __attribute__ ((packed));
+	} __packed s2;
+} __packed;
 
 union intr_data_e4 {
 	struct {
 		struct swap_info_e4 swapinfo;
 		__le16 wDataSize;
-	} __attribute__ ((packed)) s1;
+	} __packed s1;
 	struct {
 		struct cmv_e4 cmv;
 		__le16 wDataSize;
-	} __attribute__ ((packed)) s2;
-} __attribute__ ((packed));
+	} __packed s2;
+} __packed;
 
 struct intr_pkt {
 	__u8 bType;
@@ -528,15 +528,15 @@ struct intr_pkt {
 		union intr_data_e1 e1;
 		union intr_data_e4 e4;
 	} u;
-} __attribute__ ((packed));
+} __packed;
 
 #define E1_INTR_PKT_SIZE 28
 #define E4_INTR_PKT_SIZE 64
 
 static struct usb_driver uea_driver;
 static DEFINE_MUTEX(uea_mutex);
-static const char *chip_name[] = {"ADI930", "Eagle I", "Eagle II", "Eagle III",
-								"Eagle IV"};
+static const char * const chip_name[] = {
+	"ADI930", "Eagle I", "Eagle II", "Eagle III", "Eagle IV"};
 
 static int modem_index;
 static unsigned int debug;

drivers/usb/atm/usbatm.c

@@ -81,6 +81,7 @@
 #include <linux/timer.h>
 #include <linux/wait.h>
 #include <linux/kthread.h>
+#include <linux/ratelimit.h>
 
 #ifdef VERBOSE_DEBUG
 static int usbatm_print_packet(const unsigned char *data, int len);
@@ -668,8 +669,7 @@ static int usbatm_atm_send(struct atm_vcc *vcc, struct sk_buff *skb)
 	/* racy disconnection check - fine */
 	if (!instance || instance->disconnected) {
 #ifdef DEBUG
-		if (printk_ratelimit())
-			printk(KERN_DEBUG "%s: %s!\n", __func__, instance ? "disconnected" : "NULL instance");
+		printk_ratelimited(KERN_DEBUG "%s: %s!\n", __func__, instance ? "disconnected" : "NULL instance");
 #endif
 		err = -ENODEV;
 		goto fail;

drivers/usb/class/usblp.c

@@ -58,6 +58,7 @@
 #include <linux/mutex.h>
 #undef DEBUG
 #include <linux/usb.h>
+#include <linux/ratelimit.h>
 
 /*
  * Version Information
@@ -348,8 +349,7 @@ static int usblp_check_status(struct usblp *usblp, int err)
 	mutex_lock(&usblp->mut);
 	if ((error = usblp_read_status(usblp, usblp->statusbuf)) < 0) {
 		mutex_unlock(&usblp->mut);
-		if (printk_ratelimit())
-			printk(KERN_ERR
+		printk_ratelimited(KERN_ERR
 				"usblp%d: error %d reading printer status\n",
 				usblp->minor, error);
 		return 0;
@@ -653,8 +653,7 @@ static long usblp_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 		case LPGETSTATUS:
 			if ((retval = usblp_read_status(usblp, usblp->statusbuf))) {
-				if (printk_ratelimit())
-					printk(KERN_ERR "usblp%d:"
+				printk_ratelimited(KERN_ERR "usblp%d:"
 					    "failed reading printer status (%d)\n",
 					    usblp->minor, retval);
 				retval = -EIO;

drivers/usb/core/hcd.c

@@ -337,6 +337,17 @@ static const u8 ss_rh_config_descriptor[] = {
 	0x02, 0x00   /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
 };
 
+/* authorized_default behaviour:
+ * -1 is authorized for all devices except wireless (old behaviour)
+ * 0 is unauthorized for all devices
+ * 1 is authorized for all devices
+ */
+static int authorized_default = -1;
+module_param(authorized_default, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(authorized_default,
+		"Default USB device authorization: 0 is not authorized, 1 is "
+		"authorized, -1 is authorized except for wireless USB (default, "
+		"old behaviour");
 /*-------------------------------------------------------------------------*/
 
 /**
@@ -2371,7 +2382,11 @@ int usb_add_hcd(struct usb_hcd *hcd,
 
 	dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
 
-	hcd->authorized_default = hcd->wireless? 0 : 1;
+	/* Keep old behaviour if authorized_default is not in [0, 1]. */
+	if (authorized_default < 0 || authorized_default > 1)
+		hcd->authorized_default = hcd->wireless? 0 : 1;
+	else
+		hcd->authorized_default = authorized_default;
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 
 	/* HC is in reset state, but accessible.  Now do the one-time init,