---

yaml
---
r: 158321
b: refs/heads/master
c: 5304d5f
h: refs/heads/master
i:
  158319: c7461e1
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 54d35f29f49224d86b994acb6e5969b9ba09022d
+refs/heads/master: 5304d5fc74a269cc6c3e70f9713684ca729abdf0

trunk/.gitignore

@@ -27,6 +27,7 @@
 *.gz
 *.lzma
 *.patch
+*.gcno
 
 #
 # Top-level generic files

trunk/Documentation/DocBook/mac80211.tmpl

@@ -184,8 +184,6 @@ usage should require reading the full document.
 !Finclude/net/mac80211.h ieee80211_ctstoself_get
 !Finclude/net/mac80211.h ieee80211_ctstoself_duration
 !Finclude/net/mac80211.h ieee80211_generic_frame_duration
-!Finclude/net/mac80211.h ieee80211_get_hdrlen_from_skb
-!Finclude/net/mac80211.h ieee80211_hdrlen
 !Finclude/net/mac80211.h ieee80211_wake_queue
 !Finclude/net/mac80211.h ieee80211_stop_queue
 !Finclude/net/mac80211.h ieee80211_wake_queues

trunk/Documentation/block/data-integrity.txt

@@ -50,7 +50,7 @@ encouraged them to allow separation of the data and integrity metadata
 scatter-gather lists.
 
 The controller will interleave the buffers on write and split them on
-read.  This means that the Linux can DMA the data buffers to and from
+read.  This means that Linux can DMA the data buffers to and from
 host memory without changes to the page cache.
 
 Also, the 16-bit CRC checksum mandated by both the SCSI and SATA specs
@@ -66,7 +66,7 @@ software RAID5).
 
 The IP checksum is weaker than the CRC in terms of detecting bit
 errors.  However, the strength is really in the separation of the data
-buffers and the integrity metadata.  These two distinct buffers much
+buffers and the integrity metadata.  These two distinct buffers must
 match up for an I/O to complete.
 
 The separation of the data and integrity metadata buffers as well as

trunk/Documentation/cgroups/cpusets.txt

@@ -777,6 +777,18 @@ in cpuset directories:
 # /bin/echo 1-4 > cpus		-> set cpus list to cpus 1,2,3,4
 # /bin/echo 1,2,3,4 > cpus	-> set cpus list to cpus 1,2,3,4
 
+To add a CPU to a cpuset, write the new list of CPUs including the
+CPU to be added. To add 6 to the above cpuset:
+
+# /bin/echo 1-4,6 > cpus	-> set cpus list to cpus 1,2,3,4,6
+
+Similarly to remove a CPU from a cpuset, write the new list of CPUs
+without the CPU to be removed.
+
+To remove all the CPUs:
+
+# /bin/echo "" > cpus		-> clear cpus list
+
 2.3 Setting flags
 -----------------
 

trunk/Documentation/driver-model/driver.txt

@@ -207,8 +207,8 @@ Attributes
 ~~~~~~~~~~
 struct driver_attribute {
         struct attribute        attr;
-        ssize_t (*show)(struct device_driver *, char * buf, size_t count, loff_t off);
-        ssize_t (*store)(struct device_driver *, const char * buf, size_t count, loff_t off);
+        ssize_t (*show)(struct device_driver *driver, char *buf);
+        ssize_t (*store)(struct device_driver *, const char * buf, size_t count);
 };
 
 Device drivers can export attributes via their sysfs directories. 

trunk/Documentation/dvb/get_dvb_firmware

@@ -25,7 +25,7 @@ use IO::Handle;
 		"tda10046lifeview", "av7110", "dec2000t", "dec2540t",
 		"dec3000s", "vp7041", "dibusb", "nxt2002", "nxt2004",
 		"or51211", "or51132_qam", "or51132_vsb", "bluebird",
-		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2" );
+		"opera1", "cx231xx", "cx18", "cx23885", "pvrusb2", "mpc718" );
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -381,6 +381,57 @@ sub cx18 {
     $allfiles;
 }
 
+sub mpc718 {
+    my $archive = 'Yuan MPC718 TV Tuner Card 2.13.10.1016.zip';
+    my $url = "ftp://ftp.work.acer-euro.com/desktop/aspire_idea510/vista/Drivers/$archive";
+    my $fwfile = "dvb-cx18-mpc718-mt352.fw";
+    my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
+
+    checkstandard();
+    wgetfile($archive, $url);
+    unzip($archive, $tmpdir);
+
+    my $sourcefile = "$tmpdir/Yuan MPC718 TV Tuner Card 2.13.10.1016/mpc718_32bit/yuanrap.sys";
+    my $found = 0;
+
+    open IN, '<', $sourcefile or die "Couldn't open $sourcefile to extract $fwfile data\n";
+    binmode IN;
+    open OUT, '>', $fwfile;
+    binmode OUT;
+    {
+	# Block scope because we change the line terminator variable $/
+	my $prevlen = 0;
+	my $currlen;
+
+	# Buried in the data segment are 3 runs of almost identical
+	# register-value pairs that end in 0x5d 0x01 which is a "TUNER GO"
+	# command for the MT352.
+	# Pull out the middle run (because it's easy) of register-value
+	# pairs to make the "firmware" file.
+
+	local $/ = "\x5d\x01"; # MT352 "TUNER GO"
+
+	while (<IN>) {
+	    $currlen = length($_);
+	    if ($prevlen == $currlen && $currlen <= 64) {
+		chop; chop; # Get rid of "TUNER GO"
+		s/^\0\0//;  # get rid of leading 00 00 if it's there
+		printf OUT "$_";
+		$found = 1;
+		last;
+	    }
+	    $prevlen = $currlen;
+	}
+    }
+    close OUT;
+    close IN;
+    if (!$found) {
+	unlink $fwfile;
+	die "Couldn't find valid register-value sequence in $sourcefile for $fwfile\n";
+    }
+    $fwfile;
+}
+
 sub cx23885 {
     my $url = "http://linuxtv.org/downloads/firmware/";
 

trunk/Documentation/feature-removal-schedule.txt

@@ -458,3 +458,13 @@ Why:	Remove the old legacy 32bit machine check code. This has been
 	but the old version has been kept around for easier testing. Note this
 	doesn't impact the old P5 and WinChip machine check handlers.
 Who:	Andi Kleen <andi@firstfloor.org>
+
+----------------------------
+
+What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
+	exported interface anymore.
+When:	2.6.33
+Why:	cpu_policy_rwsem has a new cleaner definition making it local to
+	cpufreq core and contained inside cpufreq.c. Other dependent
+	drivers should not use it in order to safely avoid lockdep issues.
+Who:	Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>

trunk/Documentation/gcov.txt

@@ -188,13 +188,18 @@ Solution: Exclude affected source files from profiling by specifying
           GCOV_PROFILE := n or GCOV_PROFILE_basename.o := n in the
           corresponding Makefile.
 
+Problem:  Files copied from sysfs appear empty or incomplete.
+Cause:    Due to the way seq_file works, some tools such as cp or tar
+          may not correctly copy files from sysfs.
+Solution: Use 'cat' to read .gcda files and 'cp -d' to copy links.
+          Alternatively use the mechanism shown in Appendix B.
+
 
 Appendix A: gather_on_build.sh
 ==============================
 
 Sample script to gather coverage meta files on the build machine
 (see 6a):
-
 #!/bin/bash
 
 KSRC=$1
@@ -226,7 +231,7 @@ Appendix B: gather_on_test.sh
 Sample script to gather coverage data files on the test machine
 (see 6b):
 
-#!/bin/bash
+#!/bin/bash -e
 
 DEST=$1
 GCDA=/sys/kernel/debug/gcov
@@ -236,11 +241,13 @@ if [ -z "$DEST" ] ; then
   exit 1
 fi
 
-find $GCDA -name '*.gcno' -o -name '*.gcda' | tar cfz $DEST -T -
+TEMPDIR=$(mktemp -d)
+echo Collecting data..
+find $GCDA -type d -exec mkdir -p $TEMPDIR/\{\} \;
+find $GCDA -name '*.gcda' -exec sh -c 'cat < $0 > '$TEMPDIR'/$0' {} \;
+find $GCDA -name '*.gcno' -exec sh -c 'cp -d $0 '$TEMPDIR'/$0' {} \;
+tar czf $DEST -C $TEMPDIR sys
+rm -rf $TEMPDIR
 
-if [ $? -eq 0 ] ; then
-  echo "$DEST successfully created, copy to build system and unpack with:"
-  echo "  tar xfz $DEST"
-else
-  echo "Could not create file $DEST"
-fi
+echo "$DEST successfully created, copy to build system and unpack with:"
+echo "  tar xfz $DEST"

trunk/Documentation/kernel-parameters.txt

@@ -1720,8 +1720,8 @@ and is between 256 and 4096 characters. It is defined in the file
 	oprofile.cpu_type=	Force an oprofile cpu type
 			This might be useful if you have an older oprofile
 			userland or if you want common events.
-			Format: { archperfmon }
-			archperfmon: [X86] Force use of architectural
+			Format: { arch_perfmon }
+			arch_perfmon: [X86] Force use of architectural
 				perfmon on Intel CPUs instead of the
 				CPU specific event set.
 

trunk/Documentation/kmemleak.txt

@@ -16,13 +16,17 @@ Usage
 -----
 
 CONFIG_DEBUG_KMEMLEAK in "Kernel hacking" has to be enabled. A kernel
-thread scans the memory every 10 minutes (by default) and prints any new
-unreferenced objects found. To trigger an intermediate scan and display
-all the possible memory leaks:
+thread scans the memory every 10 minutes (by default) and prints the
+number of new unreferenced objects found. To display the details of all
+the possible memory leaks:
 
   # mount -t debugfs nodev /sys/kernel/debug/
   # cat /sys/kernel/debug/kmemleak
 
+To trigger an intermediate memory scan:
+
+  # echo scan > /sys/kernel/debug/kmemleak
+
 Note that the orphan objects are listed in the order they were allocated
 and one object at the beginning of the list may cause other subsequent
 objects to be reported as orphan.
@@ -31,16 +35,21 @@ Memory scanning parameters can be modified at run-time by writing to the
 /sys/kernel/debug/kmemleak file. The following parameters are supported:
 
   off		- disable kmemleak (irreversible)
-  stack=on	- enable the task stacks scanning
+  stack=on	- enable the task stacks scanning (default)
   stack=off	- disable the tasks stacks scanning
-  scan=on	- start the automatic memory scanning thread
+  scan=on	- start the automatic memory scanning thread (default)
   scan=off	- stop the automatic memory scanning thread
-  scan=<secs>	- set the automatic memory scanning period in seconds (0
-		  to disable it)
+  scan=<secs>	- set the automatic memory scanning period in seconds
+		  (default 600, 0 to stop the automatic scanning)
+  scan		- trigger a memory scan
 
 Kmemleak can also be disabled at boot-time by passing "kmemleak=off" on
 the kernel command line.
 
+Memory may be allocated or freed before kmemleak is initialised and
+these actions are stored in an early log buffer. The size of this buffer
+is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
+
 Basic Algorithm
 ---------------
 

trunk/Documentation/scheduler/sched-rt-group.txt

@@ -73,7 +73,7 @@ The remaining CPU time will be used for user input and other tasks. Because
 realtime tasks have explicitly allocated the CPU time they need to perform
 their tasks, buffer underruns in the graphics or audio can be eliminated.
 
-NOTE: the above example is not fully implemented as of yet (2.6.25). We still
+NOTE: the above example is not fully implemented yet. We still
 lack an EDF scheduler to make non-uniform periods usable.
 
 
@@ -140,14 +140,15 @@ The other option is:
 
 .o CONFIG_CGROUP_SCHED (aka "Basis for grouping tasks" = "Control groups")
 
-This uses the /cgroup virtual file system and "/cgroup/<cgroup>/cpu.rt_runtime_us"
-to control the CPU time reserved for each control group instead.
+This uses the /cgroup virtual file system and
+"/cgroup/<cgroup>/cpu.rt_runtime_us" to control the CPU time reserved for each
+control group instead.
 
 For more information on working with control groups, you should read
 Documentation/cgroups/cgroups.txt as well.
 
-Group settings are checked against the following limits in order to keep the configuration
-schedulable:
+Group settings are checked against the following limits in order to keep the
+configuration schedulable:
 
    \Sum_{i} runtime_{i} / global_period <= global_runtime / global_period
 
@@ -189,7 +190,7 @@ Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
 the biggest challenge as the current linux PI infrastructure is geared towards
 the limited static priority levels 0-99. With deadline scheduling you need to
 do deadline inheritance (since priority is inversely proportional to the
-deadline delta (deadline - now).
+deadline delta (deadline - now)).
 
 This means the whole PI machinery will have to be reworked - and that is one of
 the most complex pieces of code we have.

trunk/Documentation/sound/alsa/HD-Audio-Models.txt

@@ -240,6 +240,7 @@ AD1986A
   laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
   ultra		2-channel with EAPD (Samsung Ultra tablet PC)
   samsung	2-channel with EAPD (Samsung R65)
+  samsung-p50	2-channel with HP-automute (Samsung P50)
 
 AD1988/AD1988B/AD1989A/AD1989B
 ==============================

trunk/Documentation/spi/spidev_test.c

@@ -99,11 +99,13 @@ void parse_opts(int argc, char *argv[])
 			{ "lsb",     0, 0, 'L' },
 			{ "cs-high", 0, 0, 'C' },
 			{ "3wire",   0, 0, '3' },
+			{ "no-cs",   0, 0, 'N' },
+			{ "ready",   0, 0, 'R' },
 			{ NULL, 0, 0, 0 },
 		};
 		int c;
 
-		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3", lopts, NULL);
+		c = getopt_long(argc, argv, "D:s:d:b:lHOLC3NR", lopts, NULL);
 
 		if (c == -1)
 			break;
@@ -139,6 +141,12 @@ void parse_opts(int argc, char *argv[])
 		case '3':
 			mode |= SPI_3WIRE;
 			break;
+		case 'N':
+			mode |= SPI_NO_CS;
+			break;
+		case 'R':
+			mode |= SPI_READY;
+			break;
 		default:
 			print_usage(argv[0]);
 			break;

trunk/Documentation/video4linux/CARDLIST.em28xx

@@ -66,3 +66,4 @@
  68 -> Terratec AV350                           (em2860)        [0ccd:0084]
  69 -> KWorld ATSC 315U HDTV TV Box             (em2882)        [eb1a:a313]
  70 -> Evga inDtube                             (em2882)
+ 71 -> Silvercrest Webcam 1.3mpix               (em2820/em2840)

trunk/Documentation/x86/00-INDEX

@@ -2,3 +2,5 @@
 	- this file
 mtrr.txt
 	- how to use x86 Memory Type Range Registers to increase performance
+exception-tables.txt
+	- why and how Linux kernel uses exception tables on x86