staging: comedi: cb_pcidas: cleanup cb_pcidas_ai_rinsn()

Create local variables for the channel, range, and aref in order
to make the remaining code a bit cleaner.

Remove the extra space in all the comments.

Remove the 'static const int timeout' and just use the open
coded value in the loop.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/cb_pcidas.c

@@ -382,36 +382,33 @@ static inline unsigned int cal_enable_bits(struct comedi_device *dev)
 	return CAL_EN_BIT | CAL_SRC_BITS(devpriv->calibration_source);
 }
 
-/*
- * "instructions" read/write data in "one-shot" or "software-triggered"
- * mode.
- */
 static int cb_pcidas_ai_rinsn(struct comedi_device *dev,
 			      struct comedi_subdevice *s,
 			      struct comedi_insn *insn, unsigned int *data)
 {
 	struct cb_pcidas_private *devpriv = dev->private;
-	int n, i;
+	unsigned int chan = CR_CHAN(insn->chanspec);
+	unsigned int range = CR_RANGE(insn->chanspec);
+	unsigned int aref = CR_AREF(insn->chanspec);
 	unsigned int bits;
-	static const int timeout = 10000;
-	int channel;
-	/*  enable calibration input if appropriate */
+	int n, i;
+
+	/* enable calibration input if appropriate */
 	if (insn->chanspec & CR_ALT_SOURCE) {
 		outw(cal_enable_bits(dev),
 		     devpriv->control_status + CALIBRATION_REG);
-		channel = 0;
+		chan = 0;
 	} else {
 		outw(0, devpriv->control_status + CALIBRATION_REG);
-		channel = CR_CHAN(insn->chanspec);
 	}
-	/*  set mux limits and gain */
-	bits = BEGIN_SCAN(channel) |
-	    END_SCAN(channel) | GAIN_BITS(CR_RANGE(insn->chanspec));
-	/*  set unipolar/bipolar */
-	if (CR_RANGE(insn->chanspec) & IS_UNIPOLAR)
+
+	/* set mux limits and gain */
+	bits = BEGIN_SCAN(chan) | END_SCAN(chan) | GAIN_BITS(range);
+	/* set unipolar/bipolar */
+	if (range & IS_UNIPOLAR)
 		bits |= UNIP;
-	/*  set singleended/differential */
-	if (CR_AREF(insn->chanspec) != AREF_DIFF)
+	/* set single-ended/differential */
+	if (aref != AREF_DIFF)
 		bits |= SE;
 	outw(bits, devpriv->control_status + ADCMUX_CONT);
 
@@ -425,11 +422,11 @@ static int cb_pcidas_ai_rinsn(struct comedi_device *dev,
 
 		/* wait for conversion to end */
 		/* return -ETIMEDOUT if there is a timeout */
-		for (i = 0; i < timeout; i++) {
+		for (i = 0; i < 10000; i++) {
 			if (inw(devpriv->control_status + ADCMUX_CONT) & EOC)
 				break;
 		}
-		if (i == timeout)
+		if (i == 10000)
 			return -ETIMEDOUT;
 
 		/* read data */