---

yaml
---
r: 5451
b: refs/heads/master
c: 03938c3
h: refs/heads/master
i:
  5449: 03a66c6
  5447: d776683
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e0d7ff168a71299919f01500b3d507aae0c67513
+refs/heads/master: 03938c3f1062b0f279a0ef937a471d4db83702ed

trunk/CREDITS

@@ -1624,10 +1624,10 @@ E: ajoshi@shell.unixbox.com
 D: fbdev hacking
 
 N: Jesper Juhl
-E: jesper.juhl@gmail.com
-D: Various fixes, cleanups and minor features.
+E: juhl-lkml@dif.dk
+D: Various small janitor fixes, cleanups etc.
 S: Lemnosvej 1, 3.tv
-S: 2300 Copenhagen S.
+S: 2300 Copenhagen S
 S: Denmark
 
 N: Jozsef Kadlecsik

trunk/Documentation/Changes

@@ -65,7 +65,6 @@ o  isdn4k-utils           3.1pre1                 # isdnctrl 2>&1|grep version
 o  nfs-utils              1.0.5                   # showmount --version
 o  procps                 3.2.0                   # ps --version
 o  oprofile               0.9                     # oprofiled --version
-o  udev                   058                     # udevinfo -V
 
 Kernel compilation
 ==================

trunk/Documentation/infiniband/user_mad.txt

@@ -28,37 +28,13 @@ Creating MAD agents
 
 Receiving MADs
 
-  MADs are received using read().  The receive side now supports
-  RMPP. The buffer passed to read() must be at least one
-  struct ib_user_mad + 256 bytes. For example:
-
-  If the buffer passed is not large enough to hold the received
-  MAD (RMPP), the errno is set to ENOSPC and the length of the
-  buffer needed is set in mad.length.
-
-  Example for normal MAD (non RMPP) reads:
-	struct ib_user_mad *mad;
-	mad = malloc(sizeof *mad + 256);
-	ret = read(fd, mad, sizeof *mad + 256);
-	if (ret != sizeof mad + 256) {
-		perror("read");
-		free(mad);
-	}
-
-  Example for RMPP reads:
-	struct ib_user_mad *mad;
-	mad = malloc(sizeof *mad + 256);
-	ret = read(fd, mad, sizeof *mad + 256);
-	if (ret == -ENOSPC)) {
-		length = mad.length;
-		free(mad);
-		mad = malloc(sizeof *mad + length);
-		ret = read(fd, mad, sizeof *mad + length);
-	}
-	if (ret < 0) {
+  MADs are received using read().  The buffer passed to read() must be
+  large enough to hold at least one struct ib_user_mad.  For example:
+
+	struct ib_user_mad mad;
+	ret = read(fd, &mad, sizeof mad);
+	if (ret != sizeof mad)
 		perror("read");
-		free(mad);
-	}
 
   In addition to the actual MAD contents, the other struct ib_user_mad
   fields will be filled in with information on the received MAD.  For
@@ -74,21 +50,18 @@ Sending MADs
 
   MADs are sent using write().  The agent ID for sending should be
   filled into the id field of the MAD, the destination LID should be
-  filled into the lid field, and so on.  The send side does support
-  RMPP so arbitrary length MAD can be sent. For example:
-
-	struct ib_user_mad *mad;
+  filled into the lid field, and so on.  For example:
 
-	mad = malloc(sizeof *mad + mad_length);
+	struct ib_user_mad mad;
 
-	/* fill in mad->data */
+	/* fill in mad.data */
 
-	mad->hdr.id  = my_agent;	/* req.id from agent registration */
-	mad->hdr.lid = my_dest;		/* in network byte order... */
+	mad.id  = my_agent;	/* req.id from agent registration */
+	mad.lid = my_dest;	/* in network byte order... */
 	/* etc. */
 
-	ret = write(fd, &mad, sizeof *mad + mad_length);
-	if (ret != sizeof *mad + mad_length)
+	ret = write(fd, &mad, sizeof mad);
+	if (ret != sizeof mad)
 		perror("write");
 
 Setting IsSM Capability Bit

trunk/Documentation/pcmcia/driver-changes.txt

@@ -56,12 +56,3 @@ This file details changes in 2.6 which affect PCMCIA card driver authors:
    memory regions in-use. The name argument should be a pointer to
    your driver name. Eg, for pcnet_cs, name should point to the
    string "pcnet_cs".
-
-* CardServices is gone
-  CardServices() in 2.4 is just a big switch statement to call various
-  services.  In 2.6, all of those entry points are exported and called
-  directly (except for pcmcia_report_error(), just use cs_error() instead).
-
-* struct pcmcia_driver
-  You need to use struct pcmcia_driver and pcmcia_{un,}register_driver
-  instead of {un,}register_pccard_driver

trunk/Documentation/scsi/scsi_mid_low_api.txt

@@ -388,6 +388,7 @@ Summary:
    scsi_remove_device - detach and remove a SCSI device
    scsi_remove_host - detach and remove all SCSI devices owned by host
    scsi_report_bus_reset - report scsi _bus_ reset observed
+   scsi_set_device - place device reference in host structure
    scsi_track_queue_full - track successive QUEUE_FULL events 
    scsi_unblock_requests - allow further commands to be queued to given host
    scsi_unregister - [calls scsi_host_put()]
@@ -739,6 +740,20 @@ int scsi_remove_host(struct Scsi_Host *shost)
 void scsi_report_bus_reset(struct Scsi_Host * shost, int channel)
 
 
+/**
+ * scsi_set_device - place device reference in host structure
+ * @shost: a pointer to a scsi host instance
+ * @pdev: pointer to device instance to assign
+ *
+ *      Returns nothing
+ *
+ *      Might block: no
+ *
+ *      Defined in: include/scsi/scsi_host.h .
+ **/
+void scsi_set_device(struct Scsi_Host * shost, struct device * dev)
+
+
 /**
  * scsi_track_queue_full - track successive QUEUE_FULL events on given
  *                      device to determine if and when there is a need

trunk/Documentation/sound/alsa/ALSA-Configuration.txt

@@ -636,16 +636,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  3stack-digout	3-jack in back, a HP out and a SPDIF out
 	  5stack	5-jack in back, 2-jack in front
 	  5stack-digout	5-jack in back, 2-jack in front, a SPDIF out
-	  6stack	6-jack in back, 2-jack in front
-	  6stack-digout	6-jack with a SPDIF out
 	  w810		3-jack
 	  z71v		3-jack (HP shared SPDIF)
 	  asus		3-jack
 	  uniwill	3-jack
 	  F1734		2-jack
-	  test		for testing/debugging purpose, almost all controls can be
-			adjusted.  Appearing only when compiled with
-			$CONFIG_SND_DEBUG=y
 
 	CMI9880
 	  minimal	3-jack in back
@@ -1059,13 +1054,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     The power-management is supported.
 
-  Module snd-pxa2xx-ac97 (on arm only)
-  ------------------------------------
-
-    Module for AC97 driver for the Intel PXA2xx chip
-
-    For ARM architecture only.
-
   Module snd-rme32
   ----------------
 
@@ -1185,13 +1173,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Module supports up to 8 cards.
 
-  Module snd-sun-dbri (on sparc only)
-  -----------------------------------
-
-    Module for DBRI sound chips found on Sparcs.
-
-    Module supports up to 8 cards.
-
   Module snd-wavefront
   --------------------
 
@@ -1390,7 +1371,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
   Module snd-vxpocket
   -------------------
 
-    Module for Digigram VX-Pocket VX2 and 440 PCMCIA cards.
+    Module for Digigram VX-Pocket VX2 PCMCIA card.
 
     ibl      - Capture IBL size. (default = 0, minimum size)
 
@@ -1410,6 +1391,29 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 
     Note: the driver is build only when CONFIG_ISA is set.
 
+  Module snd-vxp440
+  -----------------
+
+    Module for Digigram VX-Pocket 440 PCMCIA card.
+
+    ibl      - Capture IBL size. (default = 0, minimum size)
+
+    Module supports up to 8 cards.  The module is compiled only when
+    PCMCIA is supported on kernel.
+
+    To activate the driver via the card manager, you'll need to set
+    up /etc/pcmcia/vxp440.conf.  See the sound/pcmcia/vx/vxp440.c.
+
+    When the driver is compiled as a module and the hotplug firmware
+    is supported, the firmware data is loaded via hotplug automatically.
+    Install the necessary firmware files in alsa-firmware package.
+    When no hotplug fw loader is available, you need to load the
+    firmware via vxloader utility in alsa-tools package.
+
+    About capture IBL, see the description of snd-vx222 module.
+
+    Note: the driver is build only when CONFIG_ISA is set.
+
   Module snd-ymfpci
   -----------------
 

trunk/Documentation/x86_64/boot-options.txt

@@ -47,7 +47,7 @@ Timing
   notsc
   Don't use the CPU time stamp counter to read the wall time.
   This can be used to work around timing problems on multiprocessor systems
-  with not properly synchronized CPUs.
+  with not properly synchronized CPUs. Only useful with a SMP kernel
 
   report_lost_ticks
   Report when timer interrupts are lost because some code turned off
@@ -74,9 +74,6 @@ Idle loop
   event. This will make the CPUs eat a lot more power, but may be useful
   to get slightly better performance in multiprocessor benchmarks. It also
   makes some profiling using performance counters more accurate.
-  Please note that on systems with MONITOR/MWAIT support (like Intel EM64T
-  CPUs) this option has no performance advantage over the normal idle loop.
-  It may also interact badly with hyperthreading.
 
 Rebooting
 
@@ -181,5 +178,6 @@ Debugging
 Misc
 
   noreplacement  Don't replace instructions with more appropiate ones
-		 for the CPU. This may be useful on asymmetric MP systems
-		 where some CPU have less capabilities than the others.
+  				 for the CPU. This may be useful on asymmetric MP systems
+				 where some CPU have less capabilities than the others.
+

trunk/MAINTAINERS

@@ -1416,20 +1416,13 @@ W:	http://www.penguinppc.org/
 L:	linuxppc-embedded@ozlabs.org
 S:	Maintained
 
-LINUX FOR POWERPC BOOT CODE
+LINUX FOR POWERPC EMBEDDED PPC8XX AND BOOT CODE
 P:	Tom Rini
 M:	trini@kernel.crashing.org
 W:	http://www.penguinppc.org/
 L:	linuxppc-embedded@ozlabs.org
 S:	Maintained
 
-LINUX FOR POWERPC EMBEDDED PPC8XX
-P:	Marcelo Tosatti
-M:	marcelo.tosatti@cyclades.com
-W:	http://www.penguinppc.org/
-L:	linuxppc-embedded@ozlabs.org
-S:	Maintained
-
 LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
 P:     Kumar Gala
 M:     kumar.gala@freescale.com

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 13
-EXTRAVERSION =-rc4
+EXTRAVERSION =-rc3
 NAME=Woozy Numbat
 
 # *DOCUMENTATION*