---

yaml --- r: 350443 b: refs/heads/master c: ccf3ed7 h: refs/heads/master i: 350441: e40016b 350439: 4258139 v: v3
git-mirror · Jan 27, 2013 · f6b4050 · f6b4050
1 parent be2ea14
commit f6b4050
Show file tree

Hide file tree

Showing 524 changed files with 3,523 additions and 5,671 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e11c4515e3aca5bfc005fe0c6b3be6bbb1485807
+refs/heads/master: ccf3ed782a6e65e0355b36424e88d2d8b5f46e89
diff --git a/trunk/Documentation/device-mapper/dm-raid.txt b/trunk/Documentation/device-mapper/dm-raid.txt
@@ -141,4 +141,3 @@ Version History
 1.2.0	Handle creation of arrays that contain failed devices.
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
-1.3.2   Fix/improve redundancy checking for RAID10
diff --git a/trunk/Documentation/devicetree/bindings/regulator/anatop-regulator.txt b/trunk/Documentation/devicetree/bindings/regulator/anatop-regulator.txt
@@ -9,11 +9,6 @@ Required properties:
 - anatop-min-voltage: Minimum voltage of this regulator
 - anatop-max-voltage: Maximum voltage of this regulator
 
-Optional properties:
-- anatop-delay-reg-offset: Anatop MFD step time register offset
-- anatop-delay-bit-shift: Bit shift for the step time register
-- anatop-delay-bit-width: Number of bits used in the step time register
-
 Any property defined as part of the core regulator
 binding, defined in regulator.txt, can also be used.
 
@@ -28,9 +23,6 @@ Example:
 		anatop-reg-offset = <0x140>;
 		anatop-vol-bit-shift = <9>;
 		anatop-vol-bit-width = <5>;
-		anatop-delay-reg-offset = <0x170>;
-		anatop-delay-bit-shift = <24>;
-		anatop-delay-bit-width = <2>;
 		anatop-min-bit-val = <1>;
 		anatop-min-voltage = <725000>;
 		anatop-max-voltage = <1300000>;

diff --git a/trunk/Documentation/hid/hid-sensor.txt b/trunk/Documentation/hid/hid-sensor.txt
diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt
@@ -2438,7 +2438,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			real-time workloads.  It can also improve energy
 			efficiency for asymmetric multiprocessors.
 
-	rcu_nocb_poll	[KNL,BOOT]
+	rcu_nocbs_poll	[KNL,BOOT]
 			Rather than requiring that offloaded CPUs
 			(specified by rcu_nocbs= above) explicitly
 			awaken the corresponding "rcuoN" kthreads,

diff --git a/trunk/Documentation/x86/boot.txt b/trunk/Documentation/x86/boot.txt
@@ -57,10 +57,6 @@ Protocol 2.10:	(Kernel 2.6.31) Added a protocol for relaxed alignment
 Protocol 2.11:	(Kernel 3.6) Added a field for offset of EFI handover
 		protocol entry point.
 
-Protocol 2.12:	(Kernel 3.8) Added the xloadflags field and extension fields
-	 	to struct boot_params for for loading bzImage and ramdisk
-		above 4G in 64bit.
-
 **** MEMORY LAYOUT
 
 The traditional memory map for the kernel loader, used for Image or
@@ -186,7 +182,7 @@ Offset	Proto	Name		Meaning
 0230/4	2.05+	kernel_alignment Physical addr alignment required for kernel
 0234/1	2.05+	relocatable_kernel Whether kernel is relocatable or not
 0235/1	2.10+	min_alignment	Minimum alignment, as a power of two
-0236/2	2.12+	xloadflags	Boot protocol option flags
+0236/2	N/A	pad3		Unused
 0238/4	2.06+	cmdline_size	Maximum size of the kernel command line
 023C/4	2.07+	hardware_subarch Hardware subarchitecture
 0240/8	2.07+	hardware_subarch_data Subarchitecture-specific data
@@ -390,7 +386,6 @@ Protocol:	2.00+
 	F  Special		(0xFF = undefined)
        10  Reserved
        11  Minimal Linux Bootloader <http://sebastian-plotz.blogspot.de>
-       12  OVMF UEFI virtualization stack
 
   Please contact <hpa@zytor.com> if you need a bootloader ID
   value assigned.
@@ -587,27 +582,6 @@ Protocol:	2.10+
   misaligned kernel.  Therefore, a loader should typically try each
   power-of-two alignment from kernel_alignment down to this alignment.
 
-Field name:     xloadflags
-Type:           read
-Offset/size:    0x236/2
-Protocol:       2.12+
-
-  This field is a bitmask.
-
-  Bit 0 (read):	XLF_KERNEL_64
-	- If 1, this kernel has the legacy 64-bit entry point at 0x200.
-
-  Bit 1 (read): XLF_CAN_BE_LOADED_ABOVE_4G
-        - If 1, kernel/boot_params/cmdline/ramdisk can be above 4G.
-
-  Bit 2 (read):	XLF_EFI_HANDOVER_32
-	- If 1, the kernel supports the 32-bit EFI handoff entry point
-          given at handover_offset.
-
-  Bit 3 (read): XLF_EFI_HANDOVER_64
-	- If 1, the kernel supports the 64-bit EFI handoff entry point
-          given at handover_offset + 0x200.
-
 Field name:	cmdline_size
 Type:		read
 Offset/size:	0x238/4

diff --git a/trunk/Documentation/x86/zero-page.txt b/trunk/Documentation/x86/zero-page.txt
@@ -19,9 +19,6 @@ Offset	Proto	Name		Meaning
 090/010	ALL	hd1_info	hd1 disk parameter, OBSOLETE!!
 0A0/010	ALL	sys_desc_table	System description table (struct sys_desc_table)
 0B0/010	ALL	olpc_ofw_header	OLPC's OpenFirmware CIF and friends
-0C0/004	ALL	ext_ramdisk_image ramdisk_image high 32bits
-0C4/004	ALL	ext_ramdisk_size  ramdisk_size high 32bits
-0C8/004	ALL	ext_cmd_line_ptr  cmd_line_ptr high 32bits
 140/080	ALL	edid_info	Video mode setup (struct edid_info)
 1C0/020	ALL	efi_info	EFI 32 information (struct efi_info)
 1E0/004	ALL	alk_mem_k	Alternative mem check, in KB
@@ -30,7 +27,6 @@ Offset	Proto	Name		Meaning
 1E9/001	ALL	eddbuf_entries	Number of entries in eddbuf (below)
 1EA/001	ALL	edd_mbr_sig_buf_entries	Number of entries in edd_mbr_sig_buffer
 				(below)
-1EF/001	ALL	sentinel	Used to detect broken bootloaders
 290/040	ALL	edd_mbr_sig_buffer EDD MBR signatures
 2D0/A00	ALL	e820_map	E820 memory map table
 				(array of struct e820entry)

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -1303,7 +1303,7 @@ F:	include/linux/dmaengine.h
 F:	include/linux/async_tx.h
 
 AT24 EEPROM DRIVER
-M:	Wolfram Sang <wsa@the-dreams.de>
+M:	Wolfram Sang <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/misc/eeprom/at24.c
@@ -1489,7 +1489,7 @@ AVR32 ARCHITECTURE
 M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
 M:	Hans-Christian Egtvedt <egtvedt@samfundet.no>
 W:	http://www.atmel.com/products/AVR32/
-W:	http://mirror.egtvedt.no/avr32linux.org/
+W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
 S:	Maintained
 F:	arch/avr32/
@@ -2966,7 +2966,7 @@ S:	Maintained
 F:	drivers/net/ethernet/i825xx/eexpress.*
 
 ETHERNET BRIDGE
-M:	Stephen Hemminger <stephen@networkplumber.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	bridge@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net:Bridge
@@ -3757,11 +3757,12 @@ S:	Maintained
 F:	drivers/i2c/i2c-stub.c
 
 I2C SUBSYSTEM
-M:	Wolfram Sang <wsa@the-dreams.de>
+M:	Wolfram Sang <w.sang@pengutronix.de>
 M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git
+T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
+T:	git git://git.pengutronix.de/git/wsa/linux.git
 S:	Maintained
 F:	Documentation/i2c/
 F:	drivers/i2c/
@@ -4904,7 +4905,7 @@ S:	Maintained
 
 MARVELL GIGABIT ETHERNET DRIVERS (skge/sky2)
 M:	Mirko Lindner <mlindner@marvell.com>
-M:	Stephen Hemminger <stephen@networkplumber.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
@@ -5179,7 +5180,7 @@ S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-M:	Stephen Hemminger <stephen@networkplumber.org>
+M:	Stephen Hemminger <shemminger@vyatta.com>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
@@ -5777,6 +5778,15 @@ L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/muxes/i2c-mux-pca9541.c
 
+PCA9564/PCA9665 I2C BUS DRIVER
+M:	Wolfram Sang <w.sang@pengutronix.de>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	drivers/i2c/algos/i2c-algo-pca.c
+F:	drivers/i2c/busses/i2c-pca-*
+F:	include/linux/i2c-algo-pca.h
+F:	include/linux/i2c-pca-platform.h
+
 PCDP - PRIMARY CONSOLE AND DEBUG PORT
 M:	Khalid Aziz <khalid@gonehiking.org>
 S:	Maintained
@@ -7078,7 +7088,7 @@ F:	include/uapi/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-M:	Liam Girdwood <lgirdwood@gmail.com>
+M:	Liam Girdwood <lrg@ti.com>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -1,8 +1,8 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION =
-NAME = Unicycling Gorilla
+EXTRAVERSION = -rc5
+NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

diff --git a/trunk/arch/arm/common/gic.c b/trunk/arch/arm/common/gic.c
@@ -351,25 +351,6 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
 	irq_set_chained_handler(irq, gic_handle_cascade_irq);
 }
 
-static u8 gic_get_cpumask(struct gic_chip_data *gic)
-{
-	void __iomem *base = gic_data_dist_base(gic);
-	u32 mask, i;
-
-	for (i = mask = 0; i < 32; i += 4) {
-		mask = readl_relaxed(base + GIC_DIST_TARGET + i);
-		mask |= mask >> 16;
-		mask |= mask >> 8;
-		if (mask)
-			break;
-	}
-
-	if (!mask)
-		pr_crit("GIC CPU mask not found - kernel will fail to boot.\n");
-
-	return mask;
-}
-
 static void __init gic_dist_init(struct gic_chip_data *gic)
 {
 	unsigned int i;
@@ -388,9 +369,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
 	/*
 	 * Set all global interrupts to this CPU only.
 	 */
-	cpumask = gic_get_cpumask(gic);
-	cpumask |= cpumask << 8;
-	cpumask |= cpumask << 16;
+	cpumask = readl_relaxed(base + GIC_DIST_TARGET + 0);
 	for (i = 32; i < gic_irqs; i += 4)
 		writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
 
@@ -421,7 +400,7 @@ static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
 	 * Get what the GIC says our CPU mask is.
 	 */
 	BUG_ON(cpu >= NR_GIC_CPU_IF);
-	cpu_mask = gic_get_cpumask(gic);
+	cpu_mask = readl_relaxed(dist_base + GIC_DIST_TARGET + 0);
 	gic_cpu_map[cpu] = cpu_mask;
 
 	/*

diff --git a/trunk/arch/arm/include/asm/memory.h b/trunk/arch/arm/include/asm/memory.h
@@ -37,7 +37,7 @@
  */
 #define PAGE_OFFSET		UL(CONFIG_PAGE_OFFSET)
 #define TASK_SIZE		(UL(CONFIG_PAGE_OFFSET) - UL(0x01000000))
-#define TASK_UNMAPPED_BASE	ALIGN(TASK_SIZE / 3, SZ_16M)
+#define TASK_UNMAPPED_BASE	(UL(CONFIG_PAGE_OFFSET) / 3)
 
 /*
  * The maximum size of a 26-bit user space task.

diff --git a/trunk/arch/arm/include/asm/smp_scu.h b/trunk/arch/arm/include/asm/smp_scu.h
@@ -7,14 +7,8 @@
 
 #ifndef __ASSEMBLER__
 unsigned int scu_get_core_count(void __iomem *);
+void scu_enable(void __iomem *);
 int scu_power_mode(void __iomem *, unsigned int);
-
-#ifdef CONFIG_SMP
-void scu_enable(void __iomem *scu_base);
-#else
-static inline void scu_enable(void __iomem *scu_base) {}
-#endif
-
 #endif
 
 #endif
diff --git a/trunk/arch/arm/kernel/smp_scu.c b/trunk/arch/arm/kernel/smp_scu.c
@@ -75,7 +75,7 @@ void scu_enable(void __iomem *scu_base)
 int scu_power_mode(void __iomem *scu_base, unsigned int mode)
 {
 	unsigned int val;
-	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
+	int cpu = cpu_logical_map(smp_processor_id());
 
 	if (mode > 3 || mode == 1 || cpu > 3)
 		return -EINVAL;

diff --git a/trunk/arch/arm/mach-exynos/Kconfig b/trunk/arch/arm/mach-exynos/Kconfig
@@ -414,7 +414,7 @@ config MACH_EXYNOS4_DT
 	select CPU_EXYNOS4210
 	select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD
 	select PINCTRL
-	select PINCTRL_EXYNOS
+	select PINCTRL_EXYNOS4
 	select USE_OF
 	help
 	  Machine support for Samsung Exynos4 machine with device tree enabled.

diff --git a/trunk/arch/arm/mach-highbank/highbank.c b/trunk/arch/arm/mach-highbank/highbank.c
@@ -28,7 +28,6 @@
 
 #include <asm/arch_timer.h>
 #include <asm/cacheflush.h>
-#include <asm/cputype.h>
 #include <asm/smp_plat.h>
 #include <asm/smp_twd.h>
 #include <asm/hardware/arm_timer.h>
@@ -60,7 +59,7 @@ static void __init highbank_scu_map_io(void)
 
 void highbank_set_cpu_jump(int cpu, void *jump_addr)
 {
-	cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(cpu), 0);
+	cpu = cpu_logical_map(cpu);
 	writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
 	__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
 	outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),

diff --git a/trunk/arch/arm/mach-highbank/sysregs.h b/trunk/arch/arm/mach-highbank/sysregs.h
@@ -37,7 +37,7 @@ extern void __iomem *sregs_base;
 
 static inline void highbank_set_core_pwr(void)
 {
-	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
+	int cpu = cpu_logical_map(smp_processor_id());
 	if (scu_base_addr)
 		scu_power_mode(scu_base_addr, SCU_PM_POWEROFF);
 	else
@@ -46,7 +46,7 @@ static inline void highbank_set_core_pwr(void)
 
 static inline void highbank_clear_core_pwr(void)
 {
-	int cpu = MPIDR_AFFINITY_LEVEL(cpu_logical_map(smp_processor_id()), 0);
+	int cpu = cpu_logical_map(smp_processor_id());
 	if (scu_base_addr)
 		scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
 	else

diff --git a/trunk/arch/arm/mach-realview/include/mach/irqs-eb.h b/trunk/arch/arm/mach-realview/include/mach/irqs-eb.h
@@ -115,7 +115,7 @@
 /*
  * Only define NR_IRQS if less than NR_IRQS_EB
  */
-#define NR_IRQS_EB		(IRQ_EB_GIC_START + 128)
+#define NR_IRQS_EB		(IRQ_EB_GIC_START + 96)
 
 #if defined(CONFIG_MACH_REALVIEW_EB) \
 	&& (!defined(NR_IRQS) || (NR_IRQS < NR_IRQS_EB))

diff --git a/trunk/arch/arm/mm/dma-mapping.c b/trunk/arch/arm/mm/dma-mapping.c
@@ -640,7 +640,7 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 
 	if (is_coherent || nommu())
 		addr = __alloc_simple_buffer(dev, size, gfp, &page);
-	else if (!(gfp & __GFP_WAIT))
+	else if (gfp & GFP_ATOMIC)
 		addr = __alloc_from_pool(size, &page);
 	else if (!IS_ENABLED(CONFIG_CMA))
 		addr = __alloc_remap_buffer(dev, size, gfp, prot, &page, caller);

diff --git a/trunk/arch/avr32/include/asm/dma-mapping.h b/trunk/arch/avr32/include/asm/dma-mapping.h
@@ -336,14 +336,4 @@ dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
-/* drivers/base/dma-mapping.c */
-extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
-			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
-extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
-				  void *cpu_addr, dma_addr_t dma_addr,
-				  size_t size);
-
-#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
-#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
-
 #endif /* __ASM_AVR32_DMA_MAPPING_H */
diff --git a/trunk/arch/blackfin/include/asm/dma-mapping.h b/trunk/arch/blackfin/include/asm/dma-mapping.h
@@ -154,14 +154,4 @@ dma_cache_sync(struct device *dev, void *vaddr, size_t size,
 	_dma_sync((dma_addr_t)vaddr, size, dir);
 }
 
-/* drivers/base/dma-mapping.c */
-extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
-			   void *cpu_addr, dma_addr_t dma_addr, size_t size);
-extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
-				  void *cpu_addr, dma_addr_t dma_addr,
-				  size_t size);
-
-#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
-#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
-
 #endif				/* _BLACKFIN_DMA_MAPPING_H */