---

yaml
---
r: 303009
b: refs/heads/master
c: 381d033
h: refs/heads/master
i:
  303007: 0b2906a
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 30e105c000abbac55602b37f4831437bca5487b0
+refs/heads/master: 381d033a0164afaaac2a1c35bc8bc379052595b2

trunk/arch/arm/mach-omap2/omap_hwmod.c

@@ -1768,6 +1768,56 @@ static int _shutdown(struct omap_hwmod *oh)
 	return 0;
 }
 
+/**
+ * _init_mpu_rt_base - populate the virtual address for a hwmod
+ * @oh: struct omap_hwmod * to locate the virtual address
+ *
+ * Cache the virtual address used by the MPU to access this IP block's
+ * registers.  This address is needed early so the OCP registers that
+ * are part of the device's address space can be ioremapped properly.
+ * No return value.
+ */
+static void __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
+{
+	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
+		return;
+
+	oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
+}
+
+/**
+ * _init - initialize internal data for the hwmod @oh
+ * @oh: struct omap_hwmod *
+ * @n: (unused)
+ *
+ * Look up the clocks and the address space used by the MPU to access
+ * registers belonging to the hwmod @oh.  @oh must already be
+ * registered at this point.  This is the first of two phases for
+ * hwmod initialization.  Code called here does not touch any hardware
+ * registers, it simply prepares internal data structures.  Returns 0
+ * upon success or if the hwmod isn't registered, or -EINVAL upon
+ * failure.
+ */
+static int __init _init(struct omap_hwmod *oh, void *data)
+{
+	int r;
+
+	if (oh->_state != _HWMOD_STATE_REGISTERED)
+		return 0;
+
+	_init_mpu_rt_base(oh, NULL);
+
+	r = _init_clocks(oh, NULL);
+	if (IS_ERR_VALUE(r)) {
+		WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name);
+		return -EINVAL;
+	}
+
+	oh->_state = _HWMOD_STATE_INITIALIZED;
+
+	return 0;
+}
+
 /**
  * _setup - do initial configuration of omap_hwmod
  * @oh: struct omap_hwmod *
@@ -1780,7 +1830,7 @@ static int _setup(struct omap_hwmod *oh, void *data)
 	int i, r;
 	u8 postsetup_state;
 
-	if (oh->_state != _HWMOD_STATE_CLKS_INITED)
+	if (oh->_state != _HWMOD_STATE_INITIALIZED)
 		return 0;
 
 	/* Set iclk autoidle mode */
@@ -2052,96 +2102,69 @@ int __init omap_hwmod_register(struct omap_hwmod **ohs)
 	return 0;
 }
 
-/*
- * _populate_mpu_rt_base - populate the virtual address for a hwmod
+/**
+ * _ensure_mpu_hwmod_is_setup - ensure the MPU SS hwmod is init'ed and set up
+ * @oh: pointer to the hwmod currently being set up (usually not the MPU)
  *
- * Must be called only from omap_hwmod_setup_*() so ioremap works properly.
- * Assumes the caller takes care of locking if needed.
+ * If the hwmod data corresponding to the MPU subsystem IP block
+ * hasn't been initialized and set up yet, do so now.  This must be
+ * done first since sleep dependencies may be added from other hwmods
+ * to the MPU.  Intended to be called only by omap_hwmod_setup*().  No
+ * return value.
  */
-static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data)
+static void __init _ensure_mpu_hwmod_is_setup(struct omap_hwmod *oh)
 {
-	if (oh->_state != _HWMOD_STATE_REGISTERED)
-		return 0;
-
-	if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
-		return 0;
-
-	oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index);
-
-	return 0;
+	if (!mpu_oh || mpu_oh->_state == _HWMOD_STATE_UNKNOWN)
+		pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n",
+		       __func__, MPU_INITIATOR_NAME);
+	else if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh)
+		omap_hwmod_setup_one(MPU_INITIATOR_NAME);
 }
 
 /**
  * omap_hwmod_setup_one - set up a single hwmod
  * @oh_name: const char * name of the already-registered hwmod to set up
  *
- * Must be called after omap2_clk_init().  Resolves the struct clk
- * names to struct clk pointers for each registered omap_hwmod.  Also
- * calls _setup() on each hwmod.  Returns -EINVAL upon error or 0 upon
- * success.
+ * Initialize and set up a single hwmod.  Intended to be used for a
+ * small number of early devices, such as the timer IP blocks used for
+ * the scheduler clock.  Must be called after omap2_clk_init().
+ * Resolves the struct clk names to struct clk pointers for each
+ * registered omap_hwmod.  Also calls _setup() on each hwmod.  Returns
+ * -EINVAL upon error or 0 upon success.
  */
 int __init omap_hwmod_setup_one(const char *oh_name)
 {
 	struct omap_hwmod *oh;
-	int r;
 
 	pr_debug("omap_hwmod: %s: %s\n", oh_name, __func__);
 
-	if (!mpu_oh) {
-		pr_err("omap_hwmod: %s: cannot setup_one: MPU initiator hwmod %s not yet registered\n",
-		       oh_name, MPU_INITIATOR_NAME);
-		return -EINVAL;
-	}
-
 	oh = _lookup(oh_name);
 	if (!oh) {
 		WARN(1, "omap_hwmod: %s: hwmod not yet registered\n", oh_name);
 		return -EINVAL;
 	}
 
-	if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh)
-		omap_hwmod_setup_one(MPU_INITIATOR_NAME);
-
-	r = _populate_mpu_rt_base(oh, NULL);
-	if (IS_ERR_VALUE(r)) {
-		WARN(1, "omap_hwmod: %s: couldn't set mpu_rt_base\n", oh_name);
-		return -EINVAL;
-	}
-
-	r = _init_clocks(oh, NULL);
-	if (IS_ERR_VALUE(r)) {
-		WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh_name);
-		return -EINVAL;
-	}
+	_ensure_mpu_hwmod_is_setup(oh);
 
+	_init(oh, NULL);
 	_setup(oh, NULL);
 
 	return 0;
 }
 
 /**
- * omap_hwmod_setup - do some post-clock framework initialization
+ * omap_hwmod_setup_all - set up all registered IP blocks
  *
- * Must be called after omap2_clk_init().  Resolves the struct clk names
- * to struct clk pointers for each registered omap_hwmod.  Also calls
- * _setup() on each hwmod.  Returns 0 upon success.
+ * Initialize and set up all IP blocks registered with the hwmod code.
+ * Must be called after omap2_clk_init().  Resolves the struct clk
+ * names to struct clk pointers for each registered omap_hwmod.  Also
+ * calls _setup() on each hwmod.  Returns 0 upon success.
  */
 static int __init omap_hwmod_setup_all(void)
 {
-	int r;
-
-	if (!mpu_oh) {
-		pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n",
-		       __func__, MPU_INITIATOR_NAME);
-		return -EINVAL;
-	}
-
-	r = omap_hwmod_for_each(_populate_mpu_rt_base, NULL);
-
-	r = omap_hwmod_for_each(_init_clocks, NULL);
-	WARN(IS_ERR_VALUE(r),
-	     "omap_hwmod: %s: _init_clocks failed\n", __func__);
+	_ensure_mpu_hwmod_is_setup(NULL);
 
+	omap_hwmod_for_each(_init, NULL);
 	omap_hwmod_for_each(_setup, NULL);
 
 	return 0;