---

yaml
---
r: 370623
b: refs/heads/master
c: 4ed12be
h: refs/heads/master
i:
  370621: 1c930f5
  370619: 5f8ecd4
  370615: bec439b
  370607: 42c49fc
  370591: ac9655e
  370559: 52d3f08
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 56734ee2835caaf62168c28281403b61b5826841
+refs/heads/master: 4ed12be051af66699d8201548bd6cf03bf122cd4

trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt

@@ -1,84 +1,19 @@
 NVIDIA Tegra Power Management Controller (PMC)
 
-The PMC block interacts with an external Power Management Unit. The PMC
-mostly controls the entry and exit of the system from different sleep
-modes. It provides power-gating controllers for SoC and CPU power-islands.
-
-Required properties:
+Properties:
 - name : Should be pmc
 - compatible : Should contain "nvidia,tegra<chip>-pmc".
 - reg : Offset and length of the register set for the device
-- clocks : Must contain an entry for each entry in clock-names.
-- clock-names : Must include the following entries:
-  "pclk" (The Tegra clock of that name),
-  "clk32k_in" (The 32KHz clock input to Tegra).
-
-Optional properties:
 - nvidia,invert-interrupt : If present, inverts the PMU interrupt signal.
   The PMU is an external Power Management Unit, whose interrupt output
   signal is fed into the PMC. This signal is optionally inverted, and then
   fed into the ARM GIC. The PMC is not involved in the detection or
   handling of this interrupt signal, merely its inversion.
-- nvidia,suspend-mode : The suspend mode that the platform should use.
-  Valid values are 0, 1 and 2:
-  0 (LP0): CPU + Core voltage off and DRAM in self-refresh
-  1 (LP1): CPU voltage off and DRAM in self-refresh
-  2 (LP2): CPU voltage off
-- nvidia,core-power-req-active-high : Boolean, core power request active-high
-- nvidia,sys-clock-req-active-high : Boolean, system clock request active-high
-- nvidia,combined-power-req : Boolean, combined power request for CPU & Core
-- nvidia,cpu-pwr-good-en : Boolean, CPU power good signal (from PMIC to PMC)
-			   is enabled.
-
-Required properties when nvidia,suspend-mode is specified:
-- nvidia,cpu-pwr-good-time : CPU power good time in uS.
-- nvidia,cpu-pwr-off-time : CPU power off time in uS.
-- nvidia,core-pwr-good-time : <Oscillator-stable-time Power-stable-time>
-			      Core power good time in uS.
-- nvidia,core-pwr-off-time : Core power off time in uS.
-
-Required properties when nvidia,suspend-mode=<0>:
-- nvidia,lp0-vec : <start length> Starting address and length of LP0 vector
-  The LP0 vector contains the warm boot code that is executed by AVP when
-  resuming from the LP0 state. The AVP (Audio-Video Processor) is an ARM7
-  processor and always being the first boot processor when chip is power on
-  or resume from deep sleep mode. When the system is resumed from the deep
-  sleep mode, the warm boot code will restore some PLLs, clocks and then
-  bring up CPU0 for resuming the system.
 
 Example:
 
-/ SoC dts including file
 pmc@7000f400 {
 	compatible = "nvidia,tegra20-pmc";
 	reg = <0x7000e400 0x400>;
-	clocks = <&tegra_car 110>, <&clk32k_in>;
-	clock-names = "pclk", "clk32k_in";
 	nvidia,invert-interrupt;
-	nvidia,suspend-mode = <1>;
-	nvidia,cpu-pwr-good-time = <2000>;
-	nvidia,cpu-pwr-off-time = <100>;
-	nvidia,core-pwr-good-time = <3845 3845>;
-	nvidia,core-pwr-off-time = <458>;
-	nvidia,core-power-req-active-high;
-	nvidia,sys-clock-req-active-high;
-	nvidia,lp0-vec = <0xbdffd000 0x2000>;
-};
-
-/ Tegra board dts file
-{
-	...
-	clocks {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		clk32k_in: clock {
-			compatible = "fixed-clock";
-			reg=<0>;
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};
-	...
 };

trunk/Documentation/sound/alsa/ALSA-Configuration.txt

@@ -890,9 +890,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     enable_msi	- Enable Message Signaled Interrupt (MSI) (default = off)
     power_save	- Automatic power-saving timeout (in second, 0 =
 		disable)
-    power_save_controller - Support runtime D3 of HD-audio controller
-		(-1 = on for supported chip (default), false = off,
-		 true = force to on even for unsupported hardware)
+    power_save_controller - Reset HD-audio controller in power-saving mode
+		(default = on)
     align_buffer_size - Force rounding of buffer/period sizes to multiples
     		      of 128 bytes. This is more efficient in terms of memory
 		      access but isn't required by the HDA spec and prevents

trunk/MAINTAINERS

@@ -5065,9 +5065,8 @@ S:	Maintained
 F:	drivers/net/ethernet/marvell/sk*
 
 MARVELL LIBERTAS WIRELESS DRIVER
-M:	Dan Williams <dcbw@redhat.com>
 L:	libertas-dev@lists.infradead.org
-S:	Maintained
+S:	Orphan
 F:	drivers/net/wireless/libertas/
 
 MARVELL MV643XX ETHERNET DRIVER
@@ -5569,6 +5568,7 @@ F:	include/uapi/linux/if_*
 F:	include/uapi/linux/netdevice.h
 
 NETXEN (1/10) GbE SUPPORT
+M:	Manish Chopra <manish.chopra@qlogic.com>
 M:	Sony Chacko <sony.chacko@qlogic.com>
 M:	Rajesh Borundia <rajesh.borundia@qlogic.com>
 L:	netdev@vger.kernel.org

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 9
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

trunk/arch/alpha/Makefile

@@ -12,7 +12,7 @@ NM := $(NM) -B
 
 LDFLAGS_vmlinux	:= -static -N #-relax
 CHECKFLAGS	+= -D__alpha__ -m64
-cflags-y	:= -pipe -mno-fp-regs -ffixed-8 -msmall-data
+cflags-y	:= -pipe -mno-fp-regs -ffixed-8
 cflags-y	+= $(call cc-option, -fno-jump-tables)
 
 cpuflags-$(CONFIG_ALPHA_EV4)		:= -mcpu=ev4

trunk/arch/alpha/include/asm/floppy.h

@@ -26,7 +26,7 @@
 #define fd_disable_irq()        disable_irq(FLOPPY_IRQ)
 #define fd_cacheflush(addr,size) /* nothing */
 #define fd_request_irq()        request_irq(FLOPPY_IRQ, floppy_interrupt,\
-					    IRQF_DISABLED, "floppy", NULL)
+					    0, "floppy", NULL)
 #define fd_free_irq()           free_irq(FLOPPY_IRQ, NULL)
 
 #ifdef CONFIG_PCI

trunk/arch/alpha/kernel/irq.c

@@ -117,13 +117,6 @@ handle_irq(int irq)
 		return;
 	}
 
-	/*
-	 * From here we must proceed with IPL_MAX. Note that we do not
-	 * explicitly enable interrupts afterwards - some MILO PALcode
-	 * (namely LX164 one) seems to have severe problems with RTI
-	 * at IPL 0.
-	 */
-	local_irq_disable();
 	irq_enter();
 	generic_handle_irq_desc(irq, desc);
 	irq_exit();

trunk/arch/alpha/kernel/irq_alpha.c

@@ -45,6 +45,14 @@ do_entInt(unsigned long type, unsigned long vector,
 	  unsigned long la_ptr, struct pt_regs *regs)
 {
 	struct pt_regs *old_regs;
+
+	/*
+	 * Disable interrupts during IRQ handling.
+	 * Note that there is no matching local_irq_enable() due to
+	 * severe problems with RTI at IPL0 and some MILO PALcode
+	 * (namely LX164).
+	 */
+	local_irq_disable();
 	switch (type) {
 	case 0:
 #ifdef CONFIG_SMP
@@ -62,7 +70,6 @@ do_entInt(unsigned long type, unsigned long vector,
 	  {
 		long cpu;
 
-		local_irq_disable();
 		smp_percpu_timer_interrupt(regs);
 		cpu = smp_processor_id();
 		if (cpu != boot_cpuid) {
@@ -222,7 +229,6 @@ process_mcheck_info(unsigned long vector, unsigned long la_ptr,
 
 struct irqaction timer_irqaction = {
 	.handler	= timer_interrupt,
-	.flags		= IRQF_DISABLED,
 	.name		= "timer",
 };
 

trunk/arch/alpha/kernel/sys_nautilus.c

@@ -188,6 +188,10 @@ nautilus_machine_check(unsigned long vector, unsigned long la_ptr)
 extern void free_reserved_mem(void *, void *);
 extern void pcibios_claim_one_bus(struct pci_bus *);
 
+static struct resource irongate_io = {
+	.name	= "Irongate PCI IO",
+	.flags	= IORESOURCE_IO,
+};
 static struct resource irongate_mem = {
 	.name	= "Irongate PCI MEM",
 	.flags	= IORESOURCE_MEM,
@@ -209,6 +213,7 @@ nautilus_init_pci(void)
 
 	irongate = pci_get_bus_and_slot(0, 0);
 	bus->self = irongate;
+	bus->resource[0] = &irongate_io;
 	bus->resource[1] = &irongate_mem;
 
 	pci_bus_size_bridges(bus);

trunk/arch/alpha/kernel/sys_titan.c

@@ -280,15 +280,15 @@ titan_late_init(void)
 	 * all reported to the kernel as machine checks, so the handler
 	 * is a nop so it can be called to count the individual events.
 	 */
-	titan_request_irq(63+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(63+16, titan_intr_nop, 0,
 		    "CChip Error", NULL);
-	titan_request_irq(62+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(62+16, titan_intr_nop, 0,
 		    "PChip 0 H_Error", NULL);
-	titan_request_irq(61+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(61+16, titan_intr_nop, 0,
 		    "PChip 1 H_Error", NULL);
-	titan_request_irq(60+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(60+16, titan_intr_nop, 0,
 		    "PChip 0 C_Error", NULL);
-	titan_request_irq(59+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(59+16, titan_intr_nop, 0,
 		    "PChip 1 C_Error", NULL);
 
 	/* 
@@ -348,9 +348,9 @@ privateer_init_pci(void)
 	 * Hook a couple of extra err interrupts that the
 	 * common titan code won't.
 	 */
-	titan_request_irq(53+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(53+16, titan_intr_nop, 0,
 		    "NMI", NULL);
-	titan_request_irq(50+16, titan_intr_nop, IRQF_DISABLED,
+	titan_request_irq(50+16, titan_intr_nop, 0,
 		    "Temperature Warning", NULL);
 
 	/*

trunk/arch/arm/Kconfig

@@ -673,7 +673,6 @@ config ARCH_TEGRA
 	select HAVE_CLK
 	select HAVE_SMP
 	select MIGHT_HAVE_CACHE_L2X0
-	select SOC_BUS
 	select SPARSE_IRQ
 	select USE_OF
 	help
@@ -1184,9 +1183,9 @@ config ARM_NR_BANKS
 	default 8
 
 config IWMMXT
-	bool "Enable iWMMXt support"
+	bool "Enable iWMMXt support" if !CPU_PJ4
 	depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4
-	default y if PXA27x || PXA3xx || ARCH_MMP
+	default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4
 	help
 	  Enable support for iWMMXt context switching at run time if
 	  running on a CPU that supports it.
@@ -1440,6 +1439,16 @@ config ARM_ERRATA_775420
 	 to deadlock. This workaround puts DSB before executing ISB if
 	 an abort may occur on cache maintenance.
 
+config ARM_ERRATA_798181
+	bool "ARM errata: TLBI/DSB failure on Cortex-A15"
+	depends on CPU_V7 && SMP
+	help
+	  On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
+	  adequately shooting down all use of the old entries. This
+	  option enables the Linux kernel workaround for this erratum
+	  which sends an IPI to the CPUs that are running the same ASID
+	  as the one being invalidated.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1661,7 +1670,7 @@ config ARCH_NR_GPIO
 	int
 	default 1024 if ARCH_SHMOBILE || ARCH_TEGRA
 	default 512 if SOC_OMAP5
-	default 392 if ARCH_U8500
+	default 355 if ARCH_U8500
 	default 288 if ARCH_VT8500 || ARCH_SUNXI
 	default 264 if MACH_H4700
 	default 0

trunk/arch/arm/boot/dts/Makefile

@@ -31,11 +31,6 @@ dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x25ek.dtb
 dtb-$(CONFIG_ARCH_AT91) += at91sam9x35ek.dtb
-# sama5d3
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d31ek.dtb
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d33ek.dtb
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d34ek.dtb
-dtb-$(CONFIG_ARCH_AT91)	+= sama5d35ek.dtb
 
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM) += bcm11351-brt.dtb

trunk/arch/arm/boot/dts/armada-370-mirabox.dts

@@ -54,7 +54,7 @@
 		};
 
 		mvsdio@d00d4000 {
-			pinctrl-0 = <&sdio_pins2>;
+			pinctrl-0 = <&sdio_pins3>;
 			pinctrl-names = "default";
 			status = "okay";
 			/*

trunk/arch/arm/boot/dts/armada-370.dtsi

@@ -59,6 +59,12 @@
 					     "mpp50", "mpp51", "mpp52";
 			      marvell,function = "sd0";
 			};
+
+			sdio_pins3: sdio-pins3 {
+			      marvell,pins = "mpp48", "mpp49", "mpp50",
+					     "mpp51", "mpp52", "mpp53";
+			      marvell,function = "sd0";
+			};
 	        };
 
 		gpio0: gpio@d0018100 {