---

yaml
---
r: 272931
b: refs/heads/master
c: 49fe2ba
h: refs/heads/master
i:
  272929: 6d04e12
  272927: bba289f
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 9daaf31a8cc9c98751b7b71198307e47d5bf6a4d
+refs/heads/master: 49fe2ba3138ca60422fd90ed76c1918be1c30fc0

trunk/Documentation/kernel-parameters.txt

@@ -2706,10 +2706,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			functions are at fixed addresses, they make nice
 			targets for exploits that can control RIP.
 
-			emulate     [default] Vsyscalls turn into traps and are
-			            emulated reasonably safely.
+			emulate     Vsyscalls turn into traps and are emulated
+			            reasonably safely.
 
-			native      Vsyscalls are native syscall instructions.
+			native      [default] Vsyscalls are native syscall
+			            instructions.
 			            This is a little bit faster than trapping
 			            and makes a few dynamic recompilers work
 			            better than they would in emulation mode.

trunk/Documentation/networking/scaling.txt

@@ -27,7 +27,7 @@ applying a filter to each packet that assigns it to one of a small number
 of logical flows. Packets for each flow are steered to a separate receive
 queue, which in turn can be processed by separate CPUs. This mechanism is
 generally known as “Receive-side Scaling” (RSS). The goal of RSS and
-the other scaling techniques to increase performance uniformly.
+the other scaling techniques is to increase performance uniformly.
 Multi-queue distribution can also be used for traffic prioritization, but
 that is not the focus of these techniques.
 
@@ -186,10 +186,10 @@ are steered using plain RPS. Multiple table entries may point to the
 same CPU. Indeed, with many flows and few CPUs, it is very likely that
 a single application thread handles flows with many different flow hashes.
 
-rps_sock_table is a global flow table that contains the *desired* CPU for
-flows: the CPU that is currently processing the flow in userspace. Each
-table value is a CPU index that is updated during calls to recvmsg and
-sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage()
+rps_sock_flow_table is a global flow table that contains the *desired* CPU
+for flows: the CPU that is currently processing the flow in userspace.
+Each table value is a CPU index that is updated during calls to recvmsg
+and sendmsg (specifically, inet_recvmsg(), inet_sendmsg(), inet_sendpage()
 and tcp_splice_read()).
 
 When the scheduler moves a thread to a new CPU while it has outstanding

trunk/MAINTAINERS

@@ -2460,7 +2460,7 @@ S:	Supported
 F:	drivers/infiniband/hw/ehca/
 
 EHEA (IBM pSeries eHEA 10Gb ethernet adapter) DRIVER
-M:	Breno Leitao <leitao@linux.vnet.ibm.com>
+M:	Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ehea/
@@ -3313,7 +3313,7 @@ M:	David Woodhouse <dwmw2@infradead.org>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.infradead.org/iommu-2.6.git
 S:	Supported
-F:	drivers/pci/intel-iommu.c
+F:	drivers/iommu/intel-iommu.c
 F:	include/linux/intel-iommu.h
 
 INTEL IOP-ADMA DMA DRIVER
@@ -6366,10 +6366,10 @@ F:	net/ipv4/tcp_lp.c
 
 TEGRA SUPPORT
 M:	Colin Cross <ccross@android.com>
-M:	Erik Gilling <konkers@android.com>
 M:	Olof Johansson <olof@lixom.net>
+M:	Stephen Warren <swarren@nvidia.com>
 L:	linux-tegra@vger.kernel.org
-T:	git git://android.git.kernel.org/kernel/tegra.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/olof/tegra.git
 S:	Supported
 F:	arch/arm/mach-tegra
 

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc9
+EXTRAVERSION =
 NAME = "Divemaster Edition"
 
 # *DOCUMENTATION*

trunk/arch/arm/boot/dts/at91sam9g45.dtsi

@@ -0,0 +1,106 @@
+/*
+ * at91sam9g45.dtsi - Device Tree Include file for AT91SAM9G45 family SoC
+ *                    applies to AT91SAM9G45, AT91SAM9M10,
+ *                    AT91SAM9G46, AT91SAM9M11 SoC
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9G45 family SoC";
+	compatible = "atmel,at91sam9g45";
+	interrupt-parent = <&aic>;
+
+	aliases {
+		serial0 = &dbgu;
+		serial1 = &usart0;
+		serial2 = &usart1;
+		serial3 = &usart2;
+		serial4 = &usart3;
+	};
+	cpus {
+		cpu@0 {
+			compatible = "arm,arm926ejs";
+		};
+	};
+
+	memory@70000000 {
+		reg = <0x70000000 0x10000000>;
+	};
+
+	ahb {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		apb {
+			compatible = "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			aic: interrupt-controller@fffff000 {
+				#interrupt-cells = <1>;
+				compatible = "atmel,at91rm9200-aic";
+				interrupt-controller;
+				interrupt-parent;
+				reg = <0xfffff000 0x200>;
+			};
+
+			dma: dma-controller@ffffec00 {
+				compatible = "atmel,at91sam9g45-dma";
+				reg = <0xffffec00 0x200>;
+				interrupts = <21>;
+			};
+
+			dbgu: serial@ffffee00 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xffffee00 0x200>;
+				interrupts = <1>;
+				status = "disabled";
+			};
+
+			usart0: serial@fff8c000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff8c000 0x200>;
+				interrupts = <7>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart1: serial@fff90000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff90000 0x200>;
+				interrupts = <8>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart2: serial@fff94000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff94000 0x200>;
+				interrupts = <9>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+
+			usart3: serial@fff98000 {
+				compatible = "atmel,at91sam9260-usart";
+				reg = <0xfff98000 0x200>;
+				interrupts = <10>;
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				status = "disabled";
+			};
+		};
+	};
+};

trunk/arch/arm/boot/dts/at91sam9m10g45ek.dts

@@ -0,0 +1,35 @@
+/*
+ * at91sam9m10g45ek.dts - Device Tree file for AT91SAM9M10G45-EK board
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Licensed under GPLv2 or later.
+ */
+/dts-v1/;
+/include/ "at91sam9g45.dtsi"
+
+/ {
+	model = "Atmel AT91SAM9M10G45-EK";
+	compatible = "atmel,at91sam9m10g45ek", "atmel,at91sam9g45", "atmel,at91sam9";
+
+	chosen {
+		bootargs = "mem=64M console=ttyS0,115200 mtdparts=atmel_nand:4M(bootstrap/uboot/kernel)ro,60M(rootfs),-(data) root=/dev/mtdblock1 rw rootfstype=jffs2";
+	};
+
+	memory@70000000 {
+		reg = <0x70000000 0x4000000>;
+	};
+
+	ahb {
+		apb {
+			dbgu: serial@ffffee00 {
+				status = "okay";
+			};
+
+			usart1: serial@fff90000 {
+				status = "okay";
+			};
+		};
+	};
+};