---

yaml
---
r: 336663
b: refs/heads/master
c: f351d02
h: refs/heads/master
i:
  336661: 336f1cc
  336659: 3edcd0c
  336655: f08000c
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 08ab72980a7747a7615c8ba5a797b651fb1aa976
+refs/heads/master: f351d027eea545a7996af54fce99f5668a67fec5

trunk/CREDITS

@@ -1823,11 +1823,6 @@ S: Kattreinstr 38
 S: D-64295
 S: Germany
 
-N: Avi Kivity
-E: avi.kivity@gmail.com
-D: Kernel-based Virtual Machine (KVM)
-S: Ra'annana, Israel
-
 N: Andi Kleen
 E: andi@firstfloor.org
 U: http://www.halobates.de

trunk/Documentation/ABI/testing/sysfs-devices-power

@@ -204,34 +204,3 @@ Description:
 
 		This attribute has no effect on system-wide suspend/resume and
 		hibernation.
-
-What:		/sys/devices/.../power/pm_qos_no_power_off
-Date:		September 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
-Description:
-		The /sys/devices/.../power/pm_qos_no_power_off attribute
-		is used for manipulating the PM QoS "no power off" flag.  If
-		set, this flag indicates to the kernel that power should not
-		be removed entirely from the device.
-
-		Not all drivers support this attribute.  If it isn't supported,
-		it is not present.
-
-		This attribute has no effect on system-wide suspend/resume and
-		hibernation.
-
-What:		/sys/devices/.../power/pm_qos_remote_wakeup
-Date:		September 2012
-Contact:	Rafael J. Wysocki <rjw@sisk.pl>
-Description:
-		The /sys/devices/.../power/pm_qos_remote_wakeup attribute
-		is used for manipulating the PM QoS "remote wakeup required"
-		flag.  If set, this flag indicates to the kernel that the
-		device is a source of user events that have to be signaled from
-		its low-power states.
-
-		Not all drivers support this attribute.  If it isn't supported,
-		it is not present.
-
-		This attribute has no effect on system-wide suspend/resume and
-		hibernation.

trunk/Documentation/cgroups/memory.txt

@@ -466,10 +466,6 @@ Note:
 5.3 swappiness
 
 Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only.
-Please note that unlike the global swappiness, memcg knob set to 0
-really prevents from any swapping even if there is a swap storage
-available. This might lead to memcg OOM killer if there are no file
-pages to reclaim.
 
 Following cgroups' swappiness can't be changed.
 - root cgroup (uses /proc/sys/vm/swappiness).

trunk/Documentation/devicetree/bindings/net/mdio-gpio.txt

@@ -8,16 +8,9 @@ gpios property as described in section VIII.1 in the following order:
 
 MDC, MDIO.
 
-Note: Each gpio-mdio bus should have an alias correctly numbered in "aliases"
-node.
-
 Example:
 
-aliases {
-	mdio-gpio0 = <&mdio0>;
-};
-
-mdio0: mdio {
+mdio {
 	compatible = "virtual,mdio-gpio";
 	#address-cells = <1>;
 	#size-cells = <0>;

trunk/Documentation/filesystems/proc.txt

@@ -33,7 +33,7 @@ Table of Contents
   2	Modifying System Parameters
 
   3	Per-Process Parameters
-  3.1	/proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj - Adjust the oom-killer
+  3.1	/proc/<pid>/oom_score_adj - Adjust the oom-killer
 								score
   3.2	/proc/<pid>/oom_score - Display current oom-killer score
   3.3	/proc/<pid>/io - Display the IO accounting fields
@@ -1320,10 +1320,10 @@ of the kernel.
 CHAPTER 3: PER-PROCESS PARAMETERS
 ------------------------------------------------------------------------------
 
-3.1 /proc/<pid>/oom_adj & /proc/<pid>/oom_score_adj- Adjust the oom-killer score
+3.1 /proc/<pid>/oom_score_adj- Adjust the oom-killer score
 --------------------------------------------------------------------------------
 
-These file can be used to adjust the badness heuristic used to select which
+This file can be used to adjust the badness heuristic used to select which
 process gets killed in out of memory conditions.
 
 The badness heuristic assigns a value to each candidate task ranging from 0
@@ -1361,12 +1361,6 @@ same system, cpuset, mempolicy, or memory controller resources to use at least
 equivalent to discounting 50% of the task's allowed memory from being considered
 as scoring against the task.
 
-For backwards compatibility with previous kernels, /proc/<pid>/oom_adj may also
-be used to tune the badness score.  Its acceptable values range from -16
-(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17
-(OOM_DISABLE) to disable oom killing entirely for that task.  Its value is
-scaled linearly with /proc/<pid>/oom_score_adj.
-
 The value of /proc/<pid>/oom_score_adj may be reduced no lower than the last
 value set by a CAP_SYS_RESOURCE process. To reduce the value any lower
 requires CAP_SYS_RESOURCE.
@@ -1381,9 +1375,7 @@ minimal amount of work.
 -------------------------------------------------------------
 
 This file can be used to check the current score used by the oom-killer is for
-any given <pid>. Use it together with /proc/<pid>/oom_score_adj to tune which
-process should be killed in an out-of-memory situation.
-
+any given <pid>.
 
 3.3  /proc/<pid>/io - Display the IO accounting fields
 -------------------------------------------------------

trunk/Documentation/networking/netdev-features.txt

@@ -164,4 +164,4 @@ read the CRC recorded by the NIC on receipt of the packet.
 This requests that the NIC receive all possible frames, including errored
 frames (such as bad FCS, etc).  This can be helpful when sniffing a link with
 bad packets on it.  Some NICs may receive more packets if also put into normal
-PROMISC mode.
+PROMISC mdoe.

trunk/Documentation/networking/vxlan.txt

@@ -32,7 +32,7 @@ no entry is in the forwarding table.
   # ip link delete vxlan0
 
 3. Show vxlan info
-  # ip -d link show vxlan0
+  # ip -d show vxlan0
 
 It is possible to create, destroy and display the vxlan
 forwarding table using the new bridge command.
@@ -41,7 +41,7 @@ forwarding table using the new bridge command.
   # bridge fdb add to 00:17:42:8a:b4:05 dst 192.19.0.2 dev vxlan0
 
 2. Delete forwarding table entry
-  # bridge fdb delete 00:17:42:8a:b4:05 dev vxlan0
+  # bridge fdb delete 00:17:42:8a:b4:05
 
 3. Show forwarding table
   # bridge fdb show dev vxlan0

trunk/Documentation/power/pm_qos_interface.txt

@@ -99,7 +99,7 @@ reading the aggregated value does not require any locking mechanism.
 
 From kernel mode the use of this interface is the following:
 
-int dev_pm_qos_add_request(device, handle, type, value):
+int dev_pm_qos_add_request(device, handle, value):
 Will insert an element into the list for that identified device with the
 target value.  Upon change to this list the new target is recomputed and any
 registered notifiers are called only if the target value is now different.

trunk/MAINTAINERS

@@ -526,17 +526,17 @@ F:	drivers/video/geode/
 F:	arch/x86/include/asm/geode.h
 
 AMD IOMMU (AMD-VI)
-M:	Joerg Roedel <joro@8bytes.org>
+M:	Joerg Roedel <joerg.roedel@amd.com>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu.git
-S:	Maintained
+S:	Supported
 F:	drivers/iommu/amd_iommu*.[ch]
 F:	include/linux/amd-iommu.h
 
 AMD MICROCODE UPDATE SUPPORT
-M:	Andreas Herrmann <herrmann.der.user@googlemail.com>
+M:	Andreas Herrmann <andreas.herrmann3@amd.com>
 L:	amd64-microcode@amd64.org
-S:	Maintained
+S:	Supported
 F:	arch/x86/kernel/microcode_amd.c
 
 AMS (Apple Motion Sensor) DRIVER
@@ -841,14 +841,6 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	arch/arm/mach-sa1100/jornada720.c
 F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
-ARM/IGEP MACHINE SUPPORT
-M:	Enric Balletbo i Serra <eballetbo@gmail.com>
-M:	Javier Martinez Canillas <javier@dowhile0.org>
-L:	linux-omap@vger.kernel.org
-L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
-F:	arch/arm/mach-omap2/board-igep0020.c
-
 ARM/INCOME PXA270 SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -2716,10 +2708,10 @@ F:	include/linux/edac.h
 
 EDAC-AMD64
 M:	Doug Thompson <dougthompson@xmission.com>
-M:	Borislav Petkov <bp@alien8.de>
+M:	Borislav Petkov <borislav.petkov@amd.com>
 L:	linux-edac@vger.kernel.org
 W:	bluesmoke.sourceforge.net
-S:	Maintained
+S:	Supported
 F:	drivers/edac/amd64_edac*
 
 EDAC-E752X
@@ -3606,58 +3598,16 @@ F:	drivers/hid/hid-hyperv.c
 F:	drivers/net/hyperv/
 F:	drivers/staging/hv/
 
-I2C OVER PARALLEL PORT
-M:	Jean Delvare <khali@linux-fr.org>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	Documentation/i2c/busses/i2c-parport
-F:	Documentation/i2c/busses/i2c-parport-light
-F:	drivers/i2c/busses/i2c-parport.c
-F:	drivers/i2c/busses/i2c-parport-light.c
-
-I2C/SMBUS CONTROLLER DRIVERS FOR PC
-M:	Jean Delvare <khali@linux-fr.org>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	Documentation/i2c/busses/i2c-ali1535
-F:	Documentation/i2c/busses/i2c-ali1563
-F:	Documentation/i2c/busses/i2c-ali15x3
-F:	Documentation/i2c/busses/i2c-amd756
-F:	Documentation/i2c/busses/i2c-amd8111
-F:	Documentation/i2c/busses/i2c-i801
-F:	Documentation/i2c/busses/i2c-nforce2
-F:	Documentation/i2c/busses/i2c-piix4
-F:	Documentation/i2c/busses/i2c-sis5595
-F:	Documentation/i2c/busses/i2c-sis630
-F:	Documentation/i2c/busses/i2c-sis96x
-F:	Documentation/i2c/busses/i2c-via
-F:	Documentation/i2c/busses/i2c-viapro
-F:	drivers/i2c/busses/i2c-ali1535.c
-F:	drivers/i2c/busses/i2c-ali1563.c
-F:	drivers/i2c/busses/i2c-ali15x3.c
-F:	drivers/i2c/busses/i2c-amd756.c
-F:	drivers/i2c/busses/i2c-amd756-s4882.c
-F:	drivers/i2c/busses/i2c-amd8111.c
-F:	drivers/i2c/busses/i2c-i801.c
-F:	drivers/i2c/busses/i2c-isch.c
-F:	drivers/i2c/busses/i2c-nforce2.c
-F:	drivers/i2c/busses/i2c-nforce2-s4985.c
-F:	drivers/i2c/busses/i2c-piix4.c
-F:	drivers/i2c/busses/i2c-sis5595.c
-F:	drivers/i2c/busses/i2c-sis630.c
-F:	drivers/i2c/busses/i2c-sis96x.c
-F:	drivers/i2c/busses/i2c-via.c
-F:	drivers/i2c/busses/i2c-viapro.c
-
 I2C/SMBUS STUB DRIVER
 M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-stub.c
 
 I2C SUBSYSTEM
-M:	Wolfram Sang <w.sang@pengutronix.de>
+M:	"Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
 M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
+M:	"Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
@@ -3668,13 +3618,6 @@ F:	drivers/i2c/
 F:	include/linux/i2c.h
 F:	include/linux/i2c-*.h
 
-I2C-TAOS-EVM DRIVER
-M:	Jean Delvare <khali@linux-fr.org>
-L:	linux-i2c@vger.kernel.org
-S:	Maintained
-F:	Documentation/i2c/busses/i2c-taos-evm
-F:	drivers/i2c/busses/i2c-taos-evm.c
-
 I2C-TINY-USB DRIVER
 M:	Till Harbaum <till@harbaum.org>
 L:	linux-i2c@vger.kernel.org
@@ -3761,7 +3704,7 @@ S:	Maintained
 F:	drivers/platform/x86/ideapad-laptop.c
 
 IDE/ATAPI DRIVERS
-M:	Borislav Petkov <bp@alien8.de>
+M:	Borislav Petkov <petkovbb@gmail.com>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	Documentation/cdrom/ide-cd
@@ -4288,8 +4231,8 @@ F:	include/linux/lockd/
 F:	include/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
+M:	Avi Kivity <avi@redhat.com>
 M:	Marcelo Tosatti <mtosatti@redhat.com>
-M:	Gleb Natapov <gleb@redhat.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -5421,7 +5364,7 @@ S:	Maintained
 F:	sound/drivers/opl4/
 
 OPROFILE
-M:	Robert Richter <rric@kernel.org>
+M:	Robert Richter <robert.richter@amd.com>
 L:	oprofile-list@lists.sf.net
 S:	Maintained
 F:	arch/*/include/asm/oprofile*.h
@@ -7267,14 +7210,6 @@ L:	linux-xtensa@linux-xtensa.org
 S:	Maintained
 F:	arch/xtensa/
 
-THERMAL
-M:      Zhang Rui <rui.zhang@intel.com>
-L:      linux-pm@vger.kernel.org
-T:      git git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux.git
-S:      Supported
-F:      drivers/thermal/
-F:      include/linux/thermal.h
-
 THINKPAD ACPI EXTRAS DRIVER
 M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net
@@ -7952,6 +7887,13 @@ M:	Roger Luethi <rl@hellgate.ch>
 S:	Maintained
 F:	drivers/net/ethernet/via/via-rhine.c
 
+VIAPRO SMBUS DRIVER
+M:	Jean Delvare <khali@linux-fr.org>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-viapro
+F:	drivers/i2c/busses/i2c-viapro.c
+
 VIA SD/MMC CARD CONTROLLER DRIVER
 M:	Bruce Chang <brucechang@via.com.tw>
 M:	Harald Welte <HaraldWelte@viatech.com>
@@ -8206,7 +8148,7 @@ F:	drivers/platform/x86
 
 X86 MCE INFRASTRUCTURE
 M:	Tony Luck <tony.luck@intel.com>
-M:	Borislav Petkov <bp@alien8.de>
+M:	Borislav Petkov <bp@amd64.org>
 L:	linux-edac@vger.kernel.org
 S:	Maintained
 F:	arch/x86/kernel/cpu/mcheck/*

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc7
+EXTRAVERSION = -rc5
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*

trunk/arch/alpha/kernel/osf_sys.c

@@ -445,7 +445,7 @@ struct procfs_args {
  * unhappy with OSF UFS. [CHECKME]
  */
 static int
-osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
+osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -465,7 +465,7 @@ osf_ufs_mount(const char *dirname, struct ufs_args __user *args, int flags)
 }
 
 static int
-osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
+osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags)
 {
 	int retval;
 	struct cdfs_args tmp;
@@ -485,7 +485,7 @@ osf_cdfs_mount(const char *dirname, struct cdfs_args __user *args, int flags)
 }
 
 static int
-osf_procfs_mount(const char *dirname, struct procfs_args __user *args, int flags)
+osf_procfs_mount(char *dirname, struct procfs_args __user *args, int flags)
 {
 	struct procfs_args tmp;