Revert "KVM: SVM: use NPT page attributes"

This reverts commit 3c2e7f7.
Initializing the mapping from MTRR to PAT values was reported to
fail nondeterministically, and it also caused extremely slow boot
(due to caching getting disabled---bug 103321) with assigned devices.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Reported-by: Sebastian Schuette <dracon@ewetel.net>
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

arch/x86/kvm/svm.c

@@ -866,64 +866,6 @@ static void svm_disable_lbrv(struct vcpu_svm *svm)
 	set_msr_interception(msrpm, MSR_IA32_LASTINTTOIP, 0, 0);
 }
 
-#define MTRR_TYPE_UC_MINUS	7
-#define MTRR2PROTVAL_INVALID 0xff
-
-static u8 mtrr2protval[8];
-
-static u8 fallback_mtrr_type(int mtrr)
-{
-	/*
-	 * WT and WP aren't always available in the host PAT.  Treat
-	 * them as UC and UC- respectively.  Everything else should be
-	 * there.
-	 */
-	switch (mtrr)
-	{
-	case MTRR_TYPE_WRTHROUGH:
-		return MTRR_TYPE_UNCACHABLE;
-	case MTRR_TYPE_WRPROT:
-		return MTRR_TYPE_UC_MINUS;
-	default:
-		BUG();
-	}
-}
-
-static void build_mtrr2protval(void)
-{
-	int i;
-	u64 pat;
-
-	for (i = 0; i < 8; i++)
-		mtrr2protval[i] = MTRR2PROTVAL_INVALID;
-
-	/* Ignore the invalid MTRR types.  */
-	mtrr2protval[2] = 0;
-	mtrr2protval[3] = 0;
-
-	/*
-	 * Use host PAT value to figure out the mapping from guest MTRR
-	 * values to nested page table PAT/PCD/PWT values.  We do not
-	 * want to change the host PAT value every time we enter the
-	 * guest.
-	 */
-	rdmsrl(MSR_IA32_CR_PAT, pat);
-	for (i = 0; i < 8; i++) {
-		u8 mtrr = pat >> (8 * i);
-
-		if (mtrr2protval[mtrr] == MTRR2PROTVAL_INVALID)
-			mtrr2protval[mtrr] = __cm_idx2pte(i);
-	}
-
-	for (i = 0; i < 8; i++) {
-		if (mtrr2protval[i] == MTRR2PROTVAL_INVALID) {
-			u8 fallback = fallback_mtrr_type(i);
-			mtrr2protval[i] = mtrr2protval[fallback];
-			BUG_ON(mtrr2protval[i] == MTRR2PROTVAL_INVALID);
-		}
-	}
-}
-
 static __init int svm_hardware_setup(void)
 {
 	int cpu;
@@ -990,7 +932,6 @@ static __init int svm_hardware_setup(void)
 	} else
 		kvm_disable_tdp();
 
-	build_mtrr2protval();
 	return 0;
 
 err:
@@ -1145,42 +1086,6 @@ static u64 svm_compute_tsc_offset(struct kvm_vcpu *vcpu, u64 target_tsc)
 	return target_tsc - tsc;
 }
 
-static void svm_set_guest_pat(struct vcpu_svm *svm, u64 *g_pat)
-{
-	struct kvm_vcpu *vcpu = &svm->vcpu;
-
-	/* Unlike Intel, AMD takes the guest's CR0.CD into account.
-	 *
-	 * AMD does not have IPAT.  To emulate it for the case of guests
-	 * with no assigned devices, just set everything to WB.  If guests
-	 * have assigned devices, however, we cannot force WB for RAM
-	 * pages only, so use the guest PAT directly.
-	 */
-	if (!kvm_arch_has_assigned_device(vcpu->kvm))
-		*g_pat = 0x0606060606060606;
-	else
-		*g_pat = vcpu->arch.pat;
-}
-
-static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
-{
-	u8 mtrr;
-
-	/*
-	 * 1. MMIO: always map as UC
-	 * 2. No passthrough: always map as WB, and force guest PAT to WB as well
-	 * 3. Passthrough: can't guarantee the result, try to trust guest.
-	 */
-	if (is_mmio)
-		return _PAGE_NOCACHE;
-
-	if (!kvm_arch_has_assigned_device(vcpu->kvm))
-		return 0;
-
-	mtrr = kvm_mtrr_get_guest_memory_type(vcpu, gfn);
-	return mtrr2protval[mtrr];
-}
-
 static void init_vmcb(struct vcpu_svm *svm, bool init_event)
 {
 	struct vmcb_control_area *control = &svm->vmcb->control;
@@ -1277,7 +1182,6 @@ static void init_vmcb(struct vcpu_svm *svm, bool init_event)
 		clr_cr_intercept(svm, INTERCEPT_CR3_READ);
 		clr_cr_intercept(svm, INTERCEPT_CR3_WRITE);
 		save->g_pat = svm->vcpu.arch.pat;
-		svm_set_guest_pat(svm, &save->g_pat);
 		save->cr3 = 0;
 		save->cr4 = 0;
 	}
@@ -4187,6 +4091,11 @@ static bool svm_has_high_real_mode_segbase(void)
 	return true;
 }
 
+static u64 svm_get_mt_mask(struct kvm_vcpu *vcpu, gfn_t gfn, bool is_mmio)
+{
+	return 0;
+}
+
 static void svm_cpuid_update(struct kvm_vcpu *vcpu)
 {
 }