[MIPS] Atlas: update interrupt handling

The following change updates the Atlas interrupt handling to match that
of Malta.  Tested with a 5Kc and a 34Kf successfully.

Signed-off-by: Maciej W. Rozycki <macro@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/mips-boards/atlas/atlas_int.c

@@ -1,6 +1,8 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999,2000 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 1999, 2000, 2006  MIPS Technologies, Inc.
+ *	All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
  *
  * ########################################################################
  *
@@ -25,17 +27,20 @@
  */
 #include <linux/compiler.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/kernel_stat.h>
 
-#include <asm/irq.h>
+#include <asm/gdb-stub.h>
 #include <asm/io.h>
+#include <asm/irq_cpu.h>
+#include <asm/msc01_ic.h>
+
 #include <asm/mips-boards/atlas.h>
 #include <asm/mips-boards/atlasint.h>
-#include <asm/gdb-stub.h>
-
+#include <asm/mips-boards/generic.h>
 
 static struct atlas_ictrl_regs *atlas_hw0_icregs;
 
@@ -47,13 +52,13 @@ static struct atlas_ictrl_regs *atlas_hw0_icregs;
 
 void disable_atlas_irq(unsigned int irq_nr)
 {
-	atlas_hw0_icregs->intrsten = (1 << (irq_nr-ATLASINT_BASE));
+	atlas_hw0_icregs->intrsten = 1 << (irq_nr - ATLAS_INT_BASE);
 	iob();
 }
 
 void enable_atlas_irq(unsigned int irq_nr)
 {
-	atlas_hw0_icregs->intseten = (1 << (irq_nr-ATLASINT_BASE));
+	atlas_hw0_icregs->intseten = 1 << (irq_nr - ATLAS_INT_BASE);
 	iob();
 }
 
@@ -107,7 +112,7 @@ static inline void atlas_hw0_irqdispatch(struct pt_regs *regs)
 	if (unlikely(int_status == 0))
 		return;
 
-	irq = ATLASINT_BASE + ls1bit32(int_status);
+	irq = ATLAS_INT_BASE + ls1bit32(int_status);
 
 	DEBUG_INT("atlas_hw0_irqdispatch: irq=%d\n", irq);
 
@@ -161,15 +166,14 @@ static inline unsigned int irq_ffs(unsigned int pending)
 }
 
 /*
- * IRQs on the Atlas board look basically (barring software IRQs which we
- * don't use at all and all external interrupt sources are combined together
- * on hardware interrupt 0 (MIPS IRQ 2)) like:
+ * IRQs on the Atlas board look basically like (all external interrupt
+ * sources are combined together on hardware interrupt 0 (MIPS IRQ 2)):
  *
- *	MIPS IRQ	Source
+ *      MIPS IRQ        Source
  *      --------        ------
- *             0	Software (ignored)
- *             1        Software (ignored)
- *             2        Combined hardware interrupt (hw0)
+ *             0        Software 0 (reschedule IPI on MT)
+ *             1        Software 1 (remote call IPI on MT)
+ *             2        Combined Atlas hardware interrupt (hw0)
  *             3        Hardware (ignored)
  *             4        Hardware (ignored)
  *             5        Hardware (ignored)
@@ -179,7 +183,7 @@ static inline unsigned int irq_ffs(unsigned int pending)
  * We handle the IRQ according to _our_ priority which is:
  *
  * Highest ----     R4k Timer
- * Lowest  ----     Combined hardware interrupt
+ * Lowest  ----     Software 0
  *
  * then we just return, if multiple IRQs are pending then we will just take
  * another exception, big deal.
@@ -193,29 +197,90 @@ asmlinkage void plat_irq_dispatch(struct pt_regs *regs)
 
 	if (irq == MIPSCPU_INT_ATLAS)
 		atlas_hw0_irqdispatch(regs);
-	else if (irq > 0)
+	else if (irq >= 0)
 		do_IRQ(MIPSCPU_INT_BASE + irq, regs);
 	else
 		spurious_interrupt(regs);
 }
 
-void __init arch_init_irq(void)
+static inline void init_atlas_irqs (int base)
 {
 	int i;
 
-	atlas_hw0_icregs = (struct atlas_ictrl_regs *)ioremap (ATLAS_ICTRL_REGS_BASE, sizeof(struct atlas_ictrl_regs *));
+	atlas_hw0_icregs = (struct atlas_ictrl_regs *)
+			   ioremap(ATLAS_ICTRL_REGS_BASE,
+				   sizeof(struct atlas_ictrl_regs *));
 
 	/*
 	 * Mask out all interrupt by writing "1" to all bit position in
 	 * the interrupt reset reg.
 	 */
 	atlas_hw0_icregs->intrsten = 0xffffffff;
 
-	for (i = ATLASINT_BASE; i <= ATLASINT_END; i++) {
+	for (i = ATLAS_INT_BASE; i <= ATLAS_INT_END; i++) {
 		irq_desc[i].status	= IRQ_DISABLED;
 		irq_desc[i].action	= 0;
 		irq_desc[i].depth	= 1;
 		irq_desc[i].chip	= &atlas_irq_type;
 		spin_lock_init(&irq_desc[i].lock);
 	}
 }
+
+static struct irqaction atlasirq = {
+	.handler = no_action,
+	.name = "Atlas cascade"
+};
+
+msc_irqmap_t __initdata msc_irqmap[] = {
+	{MSC01C_INT_TMR,		MSC01_IRQ_EDGE, 0},
+	{MSC01C_INT_PCI,		MSC01_IRQ_LEVEL, 0},
+};
+int __initdata msc_nr_irqs = sizeof(msc_irqmap) / sizeof(*msc_irqmap);
+
+msc_irqmap_t __initdata msc_eicirqmap[] = {
+	{MSC01E_INT_SW0,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_SW1,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_ATLAS,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_TMR,		MSC01_IRQ_EDGE, 0},
+	{MSC01E_INT_PCI,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_PERFCTR,		MSC01_IRQ_LEVEL, 0},
+	{MSC01E_INT_CPUCTR,		MSC01_IRQ_LEVEL, 0}
+};
+int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap) / sizeof(*msc_eicirqmap);
+
+void __init arch_init_irq(void)
+{
+	init_atlas_irqs(ATLAS_INT_BASE);
+
+	if (!cpu_has_veic)
+		mips_cpu_irq_init(MIPSCPU_INT_BASE);
+
+	switch(mips_revision_corid) {
+	case MIPS_REVISION_CORID_CORE_MSC:
+	case MIPS_REVISION_CORID_CORE_FPGA2:
+	case MIPS_REVISION_CORID_CORE_FPGA3:
+	case MIPS_REVISION_CORID_CORE_24K:
+	case MIPS_REVISION_CORID_CORE_EMUL_MSC:
+		if (cpu_has_veic)
+			init_msc_irqs (MSC01E_INT_BASE,
+				       msc_eicirqmap, msc_nr_eicirqs);
+		else
+			init_msc_irqs (MSC01C_INT_BASE,
+				       msc_irqmap, msc_nr_irqs);
+	}
+
+
+	if (cpu_has_veic) {
+		set_vi_handler (MSC01E_INT_ATLAS, atlas_hw0_irqdispatch);
+		setup_irq (MSC01E_INT_BASE + MSC01E_INT_ATLAS, &atlasirq);
+	} else if (cpu_has_vint) {
+		set_vi_handler (MIPSCPU_INT_ATLAS, atlas_hw0_irqdispatch);
+#ifdef CONFIG_MIPS_MT_SMTC
+		setup_irq_smtc (MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS,
+				&atlasirq, (0x100 << MIPSCPU_INT_ATLAS));
+#else /* Not SMTC */
+		setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
+#endif /* CONFIG_MIPS_MT_SMTC */
+	} else
+		setup_irq(MIPSCPU_INT_BASE + MIPSCPU_INT_ATLAS, &atlasirq);
+}

arch/mips/mips-boards/atlas/atlas_setup.c

@@ -77,7 +77,7 @@ static void __init serial_init(void)
 #else
 	s.iobase = ATLAS_UART_REGS_BASE+3;
 #endif
-	s.irq = ATLASINT_UART;
+	s.irq = ATLAS_INT_UART;
 	s.uartclk = ATLAS_BASE_BAUD * 16;
 	s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ;
 	s.iotype = UPIO_PORT;

arch/mips/mips-boards/generic/time.c

@@ -41,8 +41,13 @@
 
 #include <asm/mips-boards/generic.h>
 #include <asm/mips-boards/prom.h>
+
+#ifdef CONFIG_MIPS_ATLAS
+#include <asm/mips-boards/atlasint.h>
+#endif
+#ifdef CONFIG_MIPS_MALTA
 #include <asm/mips-boards/maltaint.h>
-#include <asm/mc146818-time.h>
+#endif
 
 unsigned long cpu_khz;
 

arch/mips/pci/fixup-atlas.c

@@ -21,16 +21,16 @@
 
 #include <asm/mips-boards/atlasint.h>
 
-#define PCIA		ATLASINT_PCIA
-#define PCIB		ATLASINT_PCIB
-#define PCIC		ATLASINT_PCIC
-#define PCID		ATLASINT_PCID
-#define INTA		ATLASINT_INTA
-#define INTB		ATLASINT_INTB
-#define ETH		ATLASINT_ETH
-#define INTC		ATLASINT_INTC
-#define SCSI		ATLASINT_SCSI
-#define INTD		ATLASINT_INTD
+#define PCIA		ATLAS_INT_PCIA
+#define PCIB		ATLAS_INT_PCIB
+#define PCIC		ATLAS_INT_PCIC
+#define PCID		ATLAS_INT_PCID
+#define INTA		ATLAS_INT_INTA
+#define INTB		ATLAS_INT_INTB
+#define ETH		ATLAS_INT_ETH
+#define INTC		ATLAS_INT_INTC
+#define SCSI		ATLAS_INT_SCSI
+#define INTD		ATLAS_INT_INTD
 
 static char irq_tab[][5] __initdata = {
 	/*      INTA    INTB    INTC    INTD */

include/asm-mips/mach-atlas/mc146818rtc.h

@@ -33,7 +33,7 @@
 #define RTC_PORT(x)	(ATLAS_RTC_ADR_REG + (x) * 8)
 #define RTC_IO_EXTENT	0x100
 #define RTC_IOMAPPED	0
-#define RTC_IRQ		ATLASINT_RTC
+#define RTC_IRQ		ATLAS_INT_RTC
 
 static inline unsigned char CMOS_READ(unsigned long addr)
 {

include/asm-mips/mips-boards/atlasint.h

@@ -1,6 +1,7 @@
 /*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 1999 MIPS Technologies, Inc.  All rights reserved.
+ * Copyright (C) 1999, 2006  MIPS Technologies, Inc.  All rights reserved.
+ *	Authors: Carsten Langgaard <carstenl@mips.com>
+ *		 Maciej W. Rozycki <macro@mips.com>
  *
  * ########################################################################
  *
@@ -25,41 +26,88 @@
 #ifndef _MIPS_ATLASINT_H
 #define _MIPS_ATLASINT_H
 
-#define ATLASINT_BASE		1
-#define ATLASINT_UART		(ATLASINT_BASE+0)
-#define ATLASINT_TIM0		(ATLASINT_BASE+1)
-#define ATLASINT_RES2		(ATLASINT_BASE+2)
-#define ATLASINT_RES3		(ATLASINT_BASE+3)
-#define ATLASINT_RTC		(ATLASINT_BASE+4)
-#define ATLASINT_COREHI		(ATLASINT_BASE+5)
-#define ATLASINT_CORELO		(ATLASINT_BASE+6)
-#define ATLASINT_RES7		(ATLASINT_BASE+7)
-#define ATLASINT_PCIA		(ATLASINT_BASE+8)
-#define ATLASINT_PCIB		(ATLASINT_BASE+9)
-#define ATLASINT_PCIC		(ATLASINT_BASE+10)
-#define ATLASINT_PCID		(ATLASINT_BASE+11)
-#define ATLASINT_ENUM		(ATLASINT_BASE+12)
-#define ATLASINT_DEG		(ATLASINT_BASE+13)
-#define ATLASINT_ATXFAIL	(ATLASINT_BASE+14)
-#define ATLASINT_INTA		(ATLASINT_BASE+15)
-#define ATLASINT_INTB		(ATLASINT_BASE+16)
-#define ATLASINT_ETH		ATLASINT_INTB
-#define ATLASINT_INTC		(ATLASINT_BASE+17)
-#define ATLASINT_SCSI		ATLASINT_INTC
-#define ATLASINT_INTD		(ATLASINT_BASE+18)
-#define ATLASINT_SERR		(ATLASINT_BASE+19)
-#define ATLASINT_RES20		(ATLASINT_BASE+20)
-#define ATLASINT_RES21		(ATLASINT_BASE+21)
-#define ATLASINT_RES22		(ATLASINT_BASE+22)
-#define ATLASINT_RES23		(ATLASINT_BASE+23)
-#define ATLASINT_RES24		(ATLASINT_BASE+24)
-#define ATLASINT_RES25		(ATLASINT_BASE+25)
-#define ATLASINT_RES26		(ATLASINT_BASE+26)
-#define ATLASINT_RES27		(ATLASINT_BASE+27)
-#define ATLASINT_RES28		(ATLASINT_BASE+28)
-#define ATLASINT_RES29		(ATLASINT_BASE+29)
-#define ATLASINT_RES30		(ATLASINT_BASE+30)
-#define ATLASINT_RES31		(ATLASINT_BASE+31)
-#define ATLASINT_END		(ATLASINT_BASE+31)
+/*
+ * Interrupts 0..7 are used for Atlas CPU interrupts (nonEIC mode)
+ */
+#define MIPSCPU_INT_BASE	0
+
+/* CPU interrupt offsets */
+#define MIPSCPU_INT_SW0		0
+#define MIPSCPU_INT_SW1		1
+#define MIPSCPU_INT_MB0		2
+#define MIPSCPU_INT_ATLAS	MIPSCPU_INT_MB0
+#define MIPSCPU_INT_MB1		3
+#define MIPSCPU_INT_MB2		4
+#define MIPSCPU_INT_MB3		5
+#define MIPSCPU_INT_MB4		6
+#define MIPSCPU_INT_CPUCTR	7
+
+/*
+ * Interrupts 8..39 are used for Atlas interrupt controller interrupts
+ */
+#define ATLAS_INT_BASE		8
+#define ATLAS_INT_UART		(ATLAS_INT_BASE + 0)
+#define ATLAS_INT_TIM0		(ATLAS_INT_BASE + 1)
+#define ATLAS_INT_RES2		(ATLAS_INT_BASE + 2)
+#define ATLAS_INT_RES3		(ATLAS_INT_BASE + 3)
+#define ATLAS_INT_RTC		(ATLAS_INT_BASE + 4)
+#define ATLAS_INT_COREHI	(ATLAS_INT_BASE + 5)
+#define ATLAS_INT_CORELO	(ATLAS_INT_BASE + 6)
+#define ATLAS_INT_RES7		(ATLAS_INT_BASE + 7)
+#define ATLAS_INT_PCIA		(ATLAS_INT_BASE + 8)
+#define ATLAS_INT_PCIB		(ATLAS_INT_BASE + 9)
+#define ATLAS_INT_PCIC		(ATLAS_INT_BASE + 10)
+#define ATLAS_INT_PCID		(ATLAS_INT_BASE + 11)
+#define ATLAS_INT_ENUM		(ATLAS_INT_BASE + 12)
+#define ATLAS_INT_DEG		(ATLAS_INT_BASE + 13)
+#define ATLAS_INT_ATXFAIL	(ATLAS_INT_BASE + 14)
+#define ATLAS_INT_INTA		(ATLAS_INT_BASE + 15)
+#define ATLAS_INT_INTB		(ATLAS_INT_BASE + 16)
+#define ATLAS_INT_ETH		ATLAS_INT_INTB
+#define ATLAS_INT_INTC		(ATLAS_INT_BASE + 17)
+#define ATLAS_INT_SCSI		ATLAS_INT_INTC
+#define ATLAS_INT_INTD		(ATLAS_INT_BASE + 18)
+#define ATLAS_INT_SERR		(ATLAS_INT_BASE + 19)
+#define ATLAS_INT_RES20		(ATLAS_INT_BASE + 20)
+#define ATLAS_INT_RES21		(ATLAS_INT_BASE + 21)
+#define ATLAS_INT_RES22		(ATLAS_INT_BASE + 22)
+#define ATLAS_INT_RES23		(ATLAS_INT_BASE + 23)
+#define ATLAS_INT_RES24		(ATLAS_INT_BASE + 24)
+#define ATLAS_INT_RES25		(ATLAS_INT_BASE + 25)
+#define ATLAS_INT_RES26		(ATLAS_INT_BASE + 26)
+#define ATLAS_INT_RES27		(ATLAS_INT_BASE + 27)
+#define ATLAS_INT_RES28		(ATLAS_INT_BASE + 28)
+#define ATLAS_INT_RES29		(ATLAS_INT_BASE + 29)
+#define ATLAS_INT_RES30		(ATLAS_INT_BASE + 30)
+#define ATLAS_INT_RES31		(ATLAS_INT_BASE + 31)
+#define ATLAS_INT_END		(ATLAS_INT_BASE + 31)
+
+/*
+ * Interrupts 64..127 are used for Soc-it Classic interrupts
+ */
+#define MSC01C_INT_BASE		64
+
+/* SOC-it Classic interrupt offsets */
+#define MSC01C_INT_TMR		0
+#define MSC01C_INT_PCI		1
+
+/*
+ * Interrupts 64..127 are used for Soc-it EIC interrupts
+ */
+#define MSC01E_INT_BASE		64
+
+/* SOC-it EIC interrupt offsets */
+#define	MSC01E_INT_SW0		1
+#define	MSC01E_INT_SW1		2
+#define	MSC01E_INT_MB0		3
+#define	MSC01E_INT_ATLAS	MSC01E_INT_MB0
+#define	MSC01E_INT_MB1		4
+#define	MSC01E_INT_MB2		5
+#define	MSC01E_INT_MB3		6
+#define	MSC01E_INT_MB4		7
+#define	MSC01E_INT_TMR		8
+#define	MSC01E_INT_PCI		9
+#define	MSC01E_INT_PERFCTR	10
+#define	MSC01E_INT_CPUCTR	11
 
 #endif /* !(_MIPS_ATLASINT_H) */