Merge branch 'from-rusty/modules-next' into for-4.5/core

As agreed with Rusty, we're taking a current module-next pile through
livepatching.git, as it contains solely patches that are pre-requisity
for module page protection cleanups in livepatching. Rusty will be
restarting module-next from scratch.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Documentation/IPMI.txt

@@ -587,7 +587,7 @@ used to control it:
 
   modprobe ipmi_watchdog timeout=<t> pretimeout=<t> action=<action type>
       preaction=<preaction type> preop=<preop type> start_now=x
-      nowayout=x ifnum_to_use=n
+      nowayout=x ifnum_to_use=n panic_wdt_timeout=<t>
 
 ifnum_to_use specifies which interface the watchdog timer should use.
 The default is -1, which means to pick the first one registered.
@@ -597,7 +597,9 @@ is the amount of seconds before the reset that the pre-timeout panic will
 occur (if pretimeout is zero, then pretimeout will not be enabled).  Note
 that the pretimeout is the time before the final timeout.  So if the
 timeout is 50 seconds and the pretimeout is 10 seconds, then the pretimeout
-will occur in 40 second (10 seconds before the timeout).
+will occur in 40 second (10 seconds before the timeout). The panic_wdt_timeout
+is the value of timeout which is set on kernel panic, in order to let actions
+such as kdump to occur during panic.
 
 The action may be "reset", "power_cycle", or "power_off", and
 specifies what to do when the timer times out, and defaults to
@@ -634,6 +636,7 @@ for configuring the watchdog:
 	ipmi_watchdog.preop=<preop type>
 	ipmi_watchdog.start_now=x
 	ipmi_watchdog.nowayout=x
+	ipmi_watchdog.panic_wdt_timeout=<t>
 
 The options are the same as the module parameter options.
 

Documentation/block/null_blk.txt

@@ -70,3 +70,6 @@ use_per_node_hctx=[0/1]: Default: 0
      parameter.
   1: The multi-queue block layer is instantiated with a hardware dispatch
      queue for each CPU node in the system.
+
+use_lightnvm=[0/1]: Default: 0
+  Register device with LightNVM. Requires blk-mq to be used.

Documentation/i2c/busses/i2c-i801

@@ -32,6 +32,7 @@ Supported adapters:
   * Intel Sunrise Point-LP (PCH)
   * Intel DNV (SOC)
   * Intel Broxton (SOC)
+  * Intel Lewisburg (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

Documentation/kernel-parameters.txt

@@ -1583,9 +1583,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 		hwp_only
 			Only load intel_pstate on systems which support
 			hardware P state control (HWP) if available.
-		no_acpi
-			Don't use ACPI processor performance control objects
-			_PSS and _PPC specified limits.
 
 	intremap=	[X86-64, Intel-IOMMU]
 			on	enable Interrupt Remapping (default)

MAINTAINERS

@@ -2449,7 +2449,9 @@ F:	drivers/firmware/broadcom/*
 
 BROADCOM STB NAND FLASH DRIVER
 M:	Brian Norris <computersforpeace@gmail.com>
+M:	Kamal Dasu <kdasu.kdev@gmail.com>
 L:	linux-mtd@lists.infradead.org
+L:	bcm-kernel-feedback-list@broadcom.com
 S:	Maintained
 F:	drivers/mtd/nand/brcmnand/
 
@@ -2929,10 +2931,9 @@ S:	Maintained
 F:	drivers/platform/x86/compal-laptop.c
 
 CONEXANT ACCESSRUNNER USB DRIVER
-M:	Simon Arlott <cxacru@fire.lp0.eu>
 L:	accessrunner-general@lists.sourceforge.net
 W:	http://accessrunner.sourceforge.net/
-S:	Maintained
+S:	Orphan
 F:	drivers/usb/atm/cxacru.c
 
 CONFIGFS
@@ -4409,6 +4410,7 @@ K:	fmc_d.*register
 
 FPGA MANAGER FRAMEWORK
 M:	Alan Tull <atull@opensource.altera.com>
+R:	Moritz Fischer <moritz.fischer@ettus.com>
 S:	Maintained
 F:	drivers/fpga/
 F:	include/linux/fpga/fpga-mgr.h
@@ -6364,6 +6366,7 @@ F:	arch/*/include/asm/pmem.h
 LIGHTNVM PLATFORM SUPPORT
 M:	Matias Bjorling <mb@lightnvm.io>
 W:	http://github/OpenChannelSSD
+L:	linux-block@vger.kernel.org
 S:	Maintained
 F:	drivers/lightnvm/
 F:	include/linux/lightnvm.h
@@ -7902,6 +7905,18 @@ S:	Maintained
 F:	net/openvswitch/
 F:	include/uapi/linux/openvswitch.h
 
+OPERATING PERFORMANCE POINTS (OPP)
+M:	Viresh Kumar <vireshk@kernel.org>
+M:	Nishanth Menon <nm@ti.com>
+M:	Stephen Boyd <sboyd@codeaurora.org>
+L:	linux-pm@vger.kernel.org
+S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git
+F:	drivers/base/power/opp/
+F:	include/linux/pm_opp.h
+F:	Documentation/power/opp.txt
+F:	Documentation/devicetree/bindings/opp/
+
 OPL4 DRIVER
 M:	Clemens Ladisch <clemens@ladisch.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Blurry Fish Butt
 
 # *DOCUMENTATION*

arch/alpha/kernel/module.c

@@ -160,7 +160,7 @@ apply_relocate_add(Elf64_Shdr *sechdrs, const char *strtab,
 
 	/* The small sections were sorted to the end of the segment.
 	   The following should definitely cover them.  */
-	gp = (u64)me->module_core + me->core_size - 0x8000;
+	gp = (u64)me->core_layout.base + me->core_layout.size - 0x8000;
 	got = sechdrs[me->arch.gotsecindex].sh_addr;
 
 	for (i = 0; i < n; i++) {

arch/arc/kernel/unwind.c

@@ -372,8 +372,8 @@ void *unwind_add_table(struct module *module, const void *table_start,
 		return NULL;
 
 	init_unwind_table(table, module->name,
-			  module->module_core, module->core_size,
-			  module->module_init, module->init_size,
+			  module->core_layout.base, module->core_layout.size,
+			  module->init_layout.base, module->init_layout.size,
 			  table_start, table_size,
 			  NULL, 0);
 

arch/arm/boot/dts/imx27.dtsi

@@ -486,7 +486,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024000 0x200>;
 				interrupts = <56>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 0>;
 				status = "disabled";
 			};
@@ -495,7 +498,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024200 0x200>;
 				interrupts = <54>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 1>;
 				dr_mode = "host";
 				status = "disabled";
@@ -505,7 +511,10 @@
 				compatible = "fsl,imx27-usb";
 				reg = <0x10024400 0x200>;
 				interrupts = <55>;
-				clocks = <&clks IMX27_CLK_USB_IPG_GATE>;
+				clocks = <&clks IMX27_CLK_USB_IPG_GATE>,
+					<&clks IMX27_CLK_USB_AHB_GATE>,
+					<&clks IMX27_CLK_USB_DIV>;
+				clock-names = "ipg", "ahb", "per";
 				fsl,usbmisc = <&usbmisc 2>;
 				dr_mode = "host";
 				status = "disabled";
@@ -515,7 +524,6 @@
 				#index-cells = <1>;
 				compatible = "fsl,imx27-usbmisc";
 				reg = <0x10024600 0x200>;
-				clocks = <&clks IMX27_CLK_USB_AHB_GATE>;
 			};
 
 			sahara2: sahara@10025000 {

arch/arm/kernel/module-plts.c

@@ -32,7 +32,7 @@ struct plt_entries {
 
 static bool in_init(const struct module *mod, u32 addr)
 {
-	return addr - (u32)mod->module_init < mod->init_size;
+	return addr - (u32)mod->init_layout.base < mod->init_layout.size;
 }
 
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val)

arch/arm/kvm/arm.c

@@ -563,18 +563,13 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 		if (vcpu->arch.power_off || vcpu->arch.pause)
 			vcpu_sleep(vcpu);
 
-		/*
-		 * Disarming the background timer must be done in a
-		 * preemptible context, as this call may sleep.
-		 */
-		kvm_timer_flush_hwstate(vcpu);
-
 		/*
 		 * Preparing the interrupts to be injected also
 		 * involves poking the GIC, which must be done in a
 		 * non-preemptible context.
 		 */
 		preempt_disable();
+		kvm_timer_flush_hwstate(vcpu);
 		kvm_vgic_flush_hwstate(vcpu);
 
 		local_irq_disable();

arch/arm/kvm/mmu.c

@@ -98,6 +98,11 @@ static void kvm_flush_dcache_pud(pud_t pud)
 	__kvm_flush_dcache_pud(pud);
 }
 
+static bool kvm_is_device_pfn(unsigned long pfn)
+{
+	return !pfn_valid(pfn);
+}
+
 /**
  * stage2_dissolve_pmd() - clear and flush huge PMD entry
  * @kvm:	pointer to kvm structure.
@@ -213,7 +218,7 @@ static void unmap_ptes(struct kvm *kvm, pmd_t *pmd,
 			kvm_tlb_flush_vmid_ipa(kvm, addr);
 
 			/* No need to invalidate the cache for device mappings */
-			if ((pte_val(old_pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
+			if (!kvm_is_device_pfn(__phys_to_pfn(addr)))
 				kvm_flush_dcache_pte(old_pte);
 
 			put_page(virt_to_page(pte));
@@ -305,8 +310,7 @@ static void stage2_flush_ptes(struct kvm *kvm, pmd_t *pmd,
 
 	pte = pte_offset_kernel(pmd, addr);
 	do {
-		if (!pte_none(*pte) &&
-		    (pte_val(*pte) & PAGE_S2_DEVICE) != PAGE_S2_DEVICE)
+		if (!pte_none(*pte) && !kvm_is_device_pfn(__phys_to_pfn(addr)))
 			kvm_flush_dcache_pte(*pte);
 	} while (pte++, addr += PAGE_SIZE, addr != end);
 }
@@ -1037,11 +1041,6 @@ static bool kvm_is_write_fault(struct kvm_vcpu *vcpu)
 	return kvm_vcpu_dabt_iswrite(vcpu);
 }
 
-static bool kvm_is_device_pfn(unsigned long pfn)
-{
-	return !pfn_valid(pfn);
-}
-
 /**
  * stage2_wp_ptes - write protect PMD range
  * @pmd:	pointer to pmd entry

arch/arm64/Kconfig

@@ -316,6 +316,27 @@ config ARM64_ERRATUM_832075
 
 	  If unsure, say Y.
 
+config ARM64_ERRATUM_834220
+	bool "Cortex-A57: 834220: Stage 2 translation fault might be incorrectly reported in presence of a Stage 1 fault"
+	depends on KVM
+	default y
+	help
+	  This option adds an alternative code sequence to work around ARM
+	  erratum 834220 on Cortex-A57 parts up to r1p2.
+
+	  Affected Cortex-A57 parts might report a Stage 2 translation
+	  fault as the result of a Stage 1 fault for load crossing a
+	  page boundary when there is a permission or device memory
+	  alignment fault at Stage 1 and a translation fault at Stage 2.
+
+	  The workaround is to verify that the Stage 1 translation
+	  doesn't generate a fault before handling the Stage 2 fault.
+	  Please note that this does not necessarily enable the workaround,
+	  as it depends on the alternative framework, which will only patch
+	  the kernel if an affected CPU is detected.
+
+	  If unsure, say Y.
+
 config ARM64_ERRATUM_845719
 	bool "Cortex-A53: 845719: a load might read incorrect data"
 	depends on COMPAT

arch/arm64/crypto/aes-ce-cipher.c

@@ -237,7 +237,7 @@ EXPORT_SYMBOL(ce_aes_setkey);
 static struct crypto_alg aes_alg = {
 	.cra_name		= "aes",
 	.cra_driver_name	= "aes-ce",
-	.cra_priority		= 300,
+	.cra_priority		= 250,
 	.cra_flags		= CRYPTO_ALG_TYPE_CIPHER,
 	.cra_blocksize		= AES_BLOCK_SIZE,
 	.cra_ctxsize		= sizeof(struct crypto_aes_ctx),

arch/arm64/include/asm/barrier.h

@@ -64,27 +64,31 @@ do {									\
 
 #define smp_load_acquire(p)						\
 ({									\
-	typeof(*p) ___p1;						\
+	union { typeof(*p) __val; char __c[1]; } __u;			\
 	compiletime_assert_atomic_type(*p);				\
 	switch (sizeof(*p)) {						\
 	case 1:								\
 		asm volatile ("ldarb %w0, %1"				\
-			: "=r" (___p1) : "Q" (*p) : "memory");		\
+			: "=r" (*(__u8 *)__u.__c)			\
+			: "Q" (*p) : "memory");				\
 		break;							\
 	case 2:								\
 		asm volatile ("ldarh %w0, %1"				\
-			: "=r" (___p1) : "Q" (*p) : "memory");		\
+			: "=r" (*(__u16 *)__u.__c)			\
+			: "Q" (*p) : "memory");				\
 		break;							\
 	case 4:								\
 		asm volatile ("ldar %w0, %1"				\
-			: "=r" (___p1) : "Q" (*p) : "memory");		\
+			: "=r" (*(__u32 *)__u.__c)			\
+			: "Q" (*p) : "memory");				\
 		break;							\
 	case 8:								\
 		asm volatile ("ldar %0, %1"				\
-			: "=r" (___p1) : "Q" (*p) : "memory");		\
+			: "=r" (*(__u64 *)__u.__c)			\
+			: "Q" (*p) : "memory");				\
 		break;							\
 	}								\
-	___p1;								\
+	__u.__val;							\
 })
 
 #define read_barrier_depends()		do { } while(0)

arch/arm64/include/asm/compat.h

@@ -23,7 +23,6 @@
  */
 #include <linux/types.h>
 #include <linux/sched.h>
-#include <linux/ptrace.h>
 
 #define COMPAT_USER_HZ		100
 #ifdef __AARCH64EB__
@@ -234,7 +233,7 @@ static inline compat_uptr_t ptr_to_compat(void __user *uptr)
 	return (u32)(unsigned long)uptr;
 }
 
-#define compat_user_stack_pointer() (user_stack_pointer(current_pt_regs()))
+#define compat_user_stack_pointer() (user_stack_pointer(task_pt_regs(current)))
 
 static inline void __user *arch_compat_alloc_user_space(long len)
 {

arch/arm64/include/asm/cpufeature.h

@@ -29,8 +29,9 @@
 #define ARM64_HAS_PAN				4
 #define ARM64_HAS_LSE_ATOMICS			5
 #define ARM64_WORKAROUND_CAVIUM_23154		6
+#define ARM64_WORKAROUND_834220			7
 
-#define ARM64_NCAPS				7
+#define ARM64_NCAPS				8
 
 #ifndef __ASSEMBLY__
 

arch/arm64/include/asm/dma-mapping.h

@@ -18,30 +18,23 @@
 
 #ifdef __KERNEL__
 
-#include <linux/acpi.h>
 #include <linux/types.h>
 #include <linux/vmalloc.h>
 
 #include <xen/xen.h>
 #include <asm/xen/hypervisor.h>
 
 #define DMA_ERROR_CODE	(~(dma_addr_t)0)
-extern struct dma_map_ops *dma_ops;
 extern struct dma_map_ops dummy_dma_ops;
 
 static inline struct dma_map_ops *__generic_dma_ops(struct device *dev)
 {
-	if (unlikely(!dev))
-		return dma_ops;
-	else if (dev->archdata.dma_ops)
+	if (dev && dev->archdata.dma_ops)
 		return dev->archdata.dma_ops;
-	else if (acpi_disabled)
-		return dma_ops;
 
 	/*
-	 * When ACPI is enabled, if arch_set_dma_ops is not called,
-	 * we will disable device DMA capability by setting it
-	 * to dummy_dma_ops.
+	 * We expect no ISA devices, and all other DMA masters are expected to
+	 * have someone call arch_setup_dma_ops at device creation time.
 	 */
 	return &dummy_dma_ops;
 }