---

yaml
---
r: 36093
b: refs/heads/master
c: 51c3711
h: refs/heads/master
i:
  36091: f268e4d
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 3fd39687540bd5d0501f413c91461d3b9fcbb525
+refs/heads/master: 51c3711704b66986373408cbc0540abea43d2380

trunk/drivers/i2c/algos/Kconfig

@@ -53,12 +53,6 @@ config I2C_ALGO8XX
 	tristate "MPC8xx CPM I2C interface"
 	depends on 8xx && I2C
 
-config I2C_ALGO_SIBYTE
-	tristate "SiByte SMBus interface"
-	depends on SIBYTE_SB1xxx_SOC && I2C
-	help
-	  Supports the SiByte SOC on-chip I2C interfaces (2 channels).
-
 config I2C_ALGO_SGI
 	tristate "I2C SGI interfaces"
 	depends on I2C && (SGI_IP22 || SGI_IP32 || X86_VISWS)

trunk/drivers/i2c/algos/Makefile

@@ -6,7 +6,6 @@ obj-$(CONFIG_I2C_ALGOBIT)	+= i2c-algo-bit.o
 obj-$(CONFIG_I2C_ALGOPCF)	+= i2c-algo-pcf.o
 obj-$(CONFIG_I2C_ALGOPCA)	+= i2c-algo-pca.o
 obj-$(CONFIG_I2C_ALGOITE)	+= i2c-algo-ite.o
-obj-$(CONFIG_I2C_ALGO_SIBYTE)	+= i2c-algo-sibyte.o
 obj-$(CONFIG_I2C_ALGO_SGI)	+= i2c-algo-sgi.o
 
 ifeq ($(CONFIG_I2C_DEBUG_ALGO),y)

trunk/drivers/i2c/busses/i2c-sibyte.c

@@ -1,6 +1,7 @@
 /*
  * Copyright (C) 2004 Steven J. Hill
  * Copyright (C) 2001,2002,2003 Broadcom Corporation
+ * Copyright (C) 1995-2000 Simon G. Vogl
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -17,11 +18,162 @@
  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
  */
 
+#include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/i2c-algo-sibyte.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <asm/io.h>
 #include <asm/sibyte/sb1250_regs.h>
 #include <asm/sibyte/sb1250_smbus.h>
 
+
+struct i2c_algo_sibyte_data {
+	void *data;		/* private data */
+	int   bus;		/* which bus */
+	void *reg_base;		/* CSR base */
+};
+
+/* ----- global defines ----------------------------------------------- */
+#define SMB_CSR(a,r) ((long)(a->reg_base + r))
+
+/* ----- global variables --------------------------------------------- */
+
+/* module parameters:
+ */
+static int bit_scan;	/* have a look at what's hanging 'round */
+module_param(bit_scan, int, 0);
+MODULE_PARM_DESC(bit_scan, "Scan for active chips on the bus");
+
+
+static int smbus_xfer(struct i2c_adapter *i2c_adap, u16 addr,
+		      unsigned short flags, char read_write,
+		      u8 command, int size, union i2c_smbus_data * data)
+{
+	struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
+	int data_bytes = 0;
+	int error;
+
+	while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
+		;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		csr_out32((V_SMB_ADDR(addr) |
+			   (read_write == I2C_SMBUS_READ ? M_SMB_QDATA : 0) |
+			   V_SMB_TT_QUICKCMD), SMB_CSR(adap, R_SMB_START));
+		break;
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_READ) {
+			csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_RD1BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+			data_bytes = 1;
+		} else {
+			csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+			csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR1BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+		}
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+		if (read_write == I2C_SMBUS_READ) {
+			csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD1BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+			data_bytes = 1;
+		} else {
+			csr_out32(V_SMB_LB(data->byte),
+				  SMB_CSR(adap, R_SMB_DATA));
+			csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+		}
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		csr_out32(V_SMB_CMD(command), SMB_CSR(adap, R_SMB_CMD));
+		if (read_write == I2C_SMBUS_READ) {
+			csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_CMD_RD2BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+			data_bytes = 2;
+		} else {
+			csr_out32(V_SMB_LB(data->word & 0xff),
+				  SMB_CSR(adap, R_SMB_DATA));
+			csr_out32(V_SMB_MB(data->word >> 8),
+				  SMB_CSR(adap, R_SMB_DATA));
+			csr_out32((V_SMB_ADDR(addr) | V_SMB_TT_WR2BYTE),
+				  SMB_CSR(adap, R_SMB_START));
+		}
+		break;
+	default:
+		return -1;      /* XXXKW better error code? */
+	}
+
+	while (csr_in32(SMB_CSR(adap, R_SMB_STATUS)) & M_SMB_BUSY)
+		;
+
+	error = csr_in32(SMB_CSR(adap, R_SMB_STATUS));
+	if (error & M_SMB_ERROR) {
+		/* Clear error bit by writing a 1 */
+		csr_out32(M_SMB_ERROR, SMB_CSR(adap, R_SMB_STATUS));
+		return -1;      /* XXXKW better error code? */
+	}
+
+	if (data_bytes == 1)
+		data->byte = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xff;
+	if (data_bytes == 2)
+		data->word = csr_in32(SMB_CSR(adap, R_SMB_DATA)) & 0xffff;
+
+	return 0;
+}
+
+static u32 bit_func(struct i2c_adapter *adap)
+{
+	return (I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA);
+}
+
+
+/* -----exported algorithm data: -------------------------------------	*/
+
+static struct i2c_algorithm i2c_sibyte_algo = {
+	.smbus_xfer	= smbus_xfer,
+	.functionality	= bit_func,
+};
+
+/*
+ * registering functions to load algorithms at runtime
+ */
+int i2c_sibyte_add_bus(struct i2c_adapter *i2c_adap, int speed)
+{
+	int i;
+	struct i2c_algo_sibyte_data *adap = i2c_adap->algo_data;
+
+	/* register new adapter to i2c module... */
+	i2c_adap->algo = &i2c_sibyte_algo;
+
+	/* Set the frequency to 100 kHz */
+	csr_out32(speed, SMB_CSR(adap,R_SMB_FREQ));
+	csr_out32(0, SMB_CSR(adap,R_SMB_CONTROL));
+
+	/* scan bus */
+	if (bit_scan) {
+		union i2c_smbus_data data;
+		int rc;
+		printk(KERN_INFO " i2c-algo-sibyte.o: scanning bus %s.\n",
+		       i2c_adap->name);
+		for (i = 0x00; i < 0x7f; i++) {
+			/* XXXKW is this a realistic probe? */
+			rc = smbus_xfer(i2c_adap, i, 0, I2C_SMBUS_READ, 0,
+					I2C_SMBUS_BYTE_DATA, &data);
+			if (!rc) {
+				printk("(%02x)",i);
+			} else
+				printk(".");
+		}
+		printk("\n");
+	}
+
+	return i2c_add_adapter(i2c_adap);
+}
+
+
 static struct i2c_algo_sibyte_data sibyte_board_data[2] = {
 	{ NULL, 0, (void *) (CKSEG1+A_SMB_BASE(0)) },
 	{ NULL, 1, (void *) (CKSEG1+A_SMB_BASE(1)) }
@@ -58,8 +210,8 @@ static int __init i2c_sibyte_init(void)
 
 static void __exit i2c_sibyte_exit(void)
 {
-	i2c_sibyte_del_bus(&sibyte_board_adapter[0]);
-	i2c_sibyte_del_bus(&sibyte_board_adapter[1]);
+	i2c_del_bus(&sibyte_board_adapter[0]);
+	i2c_del_bus(&sibyte_board_adapter[1]);
 }
 
 module_init(i2c_sibyte_init);