---

yaml
---
r: 119382
b: refs/heads/master
c: 42182c7
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: b6283534a3e057f8268ca5448305900f74d12608
+refs/heads/master: 42182c7850cdfbfdcf5f8763908a7a66b5ce9041

trunk/Documentation/input/input-programming.txt

@@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
 
 static struct input_dev *button_dev;
 
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
 {
 	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
 	input_sync(button_dev);
+	return IRQ_HANDLED;
 }
 
 static int __init button_init(void)

trunk/Documentation/kernel-parameters.txt

@@ -294,7 +294,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			Possible values are:
 			isolate - enable device isolation (each device, as far
 			          as possible, will get its own protection
-			          domain)
+			          domain) [default]
+			share - put every device behind one IOMMU into the
+				same protection domain
 			fullflush - enable flushing of IO/TLB entries when
 				    they are unmapped. Otherwise they are
 				    flushed before they will be reused, which
@@ -1193,8 +1195,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			it is equivalent to "nosmp", which also disables
 			the IO APIC.
 
-	max_addr=[KMG]	[KNL,BOOT,ia64] All physical memory greater than or
-			equal to this physical address is ignored.
+	max_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory greater than
+			or equal to this physical address is ignored.
 
 	max_luns=	[SCSI] Maximum number of LUNs to probe.
 			Should be between 1 and 2^32-1.
@@ -1294,6 +1296,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	mga=		[HW,DRM]
 
+	min_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory below this
+			physical address is ignored.
+
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
 			parameter allows control of the logging verbosity for

trunk/Documentation/networking/phy.txt

@@ -96,7 +96,7 @@ Letting the PHY Abstraction Layer do Everything
    static void adjust_link(struct net_device *dev);
 
  Next, you need to know the device name of the PHY connected to this device. 
- The name will look something like, "phy0:0", where the first number is the
+ The name will look something like, "0:00", where the first number is the
  bus id, and the second is the PHY's address on that bus.  Typically,
  the bus is responsible for making its ID unique.
 

trunk/MAINTAINERS

@@ -1809,7 +1809,7 @@ S:	Maintained
 
 FTRACE
 P:	Steven Rostedt
-M:	srostedt@redhat.com
+M:	rostedt@goodmis.org
 S:	Maintained
 
 FUJITSU FR-V (FRV) PORT
@@ -3928,8 +3928,6 @@ M:	bootc@bootc.net
 S:	Maintained
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
-P:	Ingo Molnar
-M:	mingo@redhat.com
 P:	Neil Brown
 M:	neilb@suse.de
 L:	linux-raid@vger.kernel.org

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Killer Bat of Doom
 
 # *DOCUMENTATION*

trunk/arch/Kconfig

@@ -79,8 +79,6 @@ config HAVE_KRETPROBES
 #	task_pt_regs()		in asm/processor.h or asm/ptrace.h
 #	arch_has_single_step()	if there is hardware single-step support
 #	arch_has_block_step()	if there is hardware block-step support
-#	arch_ptrace()		and not #define __ARCH_SYS_PTRACE
-#	compat_arch_ptrace()	and #define __ARCH_WANT_COMPAT_SYS_PTRACE
 #	asm/syscall.h		supplying asm-generic/syscall.h interface
 #	linux/regset.h		user_regset interfaces
 #	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h

trunk/arch/alpha/kernel/pci.c

@@ -338,7 +338,7 @@ common_swizzle(struct pci_dev *dev, u8 *pinp)
 	return PCI_SLOT(dev->devfn);
 }
 
-void __devinit
+void
 pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 			 struct resource *res)
 {

trunk/arch/alpha/kernel/smp.c

@@ -121,7 +121,7 @@ wait_boot_cpu_to_stop(int cpuid)
 /*
  * Where secondaries begin a life of C.
  */
-void __init
+void __cpuinit
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
@@ -198,7 +198,7 @@ wait_for_txrdy (unsigned long cpumask)
  * Send a message to a secondary's console.  "START" is one such
  * interesting message.  ;-)
  */
-static void __init
+static void __cpuinit
 send_secondary_console_msg(char *str, int cpuid)
 {
 	struct percpu_struct *cpu;
@@ -289,7 +289,7 @@ recv_secondary_console_msg(void)
 /*
  * Convince the console to have a secondary cpu begin execution.
  */
-static int __init
+static int __cpuinit
 secondary_cpu_start(int cpuid, struct task_struct *idle)
 {
 	struct percpu_struct *cpu;

trunk/arch/alpha/kernel/traps.c

@@ -31,7 +31,7 @@
 
 static int opDEC_fix;
 
-static void __init
+static void __cpuinit
 opDEC_check(void)
 {
 	__asm__ __volatile__ (
@@ -1072,7 +1072,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 	return;
 }
 
-void __init
+void __cpuinit
 trap_init(void)
 {
 	/* Tell PAL-code what global pointer we want in the kernel.  */

trunk/arch/arm/mach-pxa/include/mach/pxafb.h

@@ -33,6 +33,7 @@
 #define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
 #define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
 
+#define LCD_TYPE_MASK		0xf
 #define LCD_TYPE_UNKNOWN	0
 #define LCD_TYPE_MONO_STN	1
 #define LCD_TYPE_MONO_DSTN	2

trunk/arch/arm/mach-pxa/reset.c

@@ -90,12 +90,13 @@ void arch_reset(char mode)
 		/* Jump into ROM at address 0 */
 		cpu_reset(0);
 		break;
-	case 'h':
-		do_hw_reset();
-		break;
 	case 'g':
 		do_gpio_reset();
 		break;
+	case 'h':
+	default:
+		do_hw_reset();
+		break;
 	}
 }
 

trunk/arch/arm/mach-pxa/spitz.c

@@ -67,6 +67,7 @@
 static unsigned long spitz_pin_config[] __initdata = {
 	/* Chip Selects */
 	GPIO78_nCS_2,	/* SCOOP #2 */
+	GPIO79_nCS_3,	/* NAND */
 	GPIO80_nCS_4,	/* SCOOP #1 */
 
 	/* LCD - 16bpp Active TFT */
@@ -97,10 +98,10 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO51_nPIOW,
 	GPIO85_nPCE_1,
 	GPIO54_nPCE_2,
-	GPIO79_PSKTSEL,
 	GPIO55_nPREG,
 	GPIO56_nPWAIT,
 	GPIO57_nIOIS16,
+	GPIO104_PSKTSEL,
 
 	/* MMC */
 	GPIO32_MMC_CLK,
@@ -686,7 +687,6 @@ static void __init akita_init(void)
 	spitz_pcmcia_config.num_devs = 1;
 	platform_scoop_config = &spitz_pcmcia_config;
 
-	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
 
 	common_init();

trunk/arch/blackfin/include/asm/bfin-global.h

@@ -101,7 +101,7 @@ extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */
 extern unsigned long _ramstart, _ramend, _rambase;
 extern unsigned long memory_start, memory_end, physical_mem_end;
 extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[],
-	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _ebss_b_l1[],
+	_ebss_l1[], _l1_lma_start[], _sdata_b_l1[], _sbss_b_l1[], _ebss_b_l1[],
 	_stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[],
 	_ebss_l2[], _l2_lma_start[];
 

trunk/arch/blackfin/include/asm/dma-mapping.h

@@ -15,7 +15,11 @@ void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
 #define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
 #define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
 
-#define dma_mapping_error
+static inline
+int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+	return 0;
+}
 
 /*
  * Map a single buffer of the indicated size for DMA in streaming mode.

trunk/arch/blackfin/kernel/bfin_gpio.c

@@ -218,7 +218,7 @@ inline int check_gpio(unsigned gpio)
 	if (gpio == GPIO_PB15 || gpio == GPIO_PC14 || gpio == GPIO_PC15
 	    || gpio == GPIO_PH14 || gpio == GPIO_PH15
 	    || gpio == GPIO_PJ14 || gpio == GPIO_PJ15
-	    || gpio > MAX_BLACKFIN_GPIOS)
+	    || gpio >= MAX_BLACKFIN_GPIOS)
 		return -EINVAL;
 	return 0;
 }

trunk/arch/blackfin/kernel/cplb-nompu/cplbinit.c

@@ -188,10 +188,11 @@ static struct cplb_desc cplb_data[] = {
 
 static u16 __init lock_kernel_check(u32 start, u32 end)
 {
-	if ((end   <= (u32) _end && end   >= (u32)_stext) ||
-	    (start <= (u32) _end && start >= (u32)_stext))
-		return IN_KERNEL;
-	return 0;
+	if (start >= (u32)_end || end <= (u32)_stext)
+		return 0;
+
+	/* This cplb block overlapped with kernel area. */
+	return IN_KERNEL;
 }
 
 static unsigned short __init

trunk/arch/blackfin/kernel/process.c

@@ -351,9 +351,14 @@ int _access_ok(unsigned long addr, unsigned long size)
 		return 1;
 #endif
 #if L1_DATA_B_LENGTH != 0
-	if (addr >= L1_DATA_B_START
+	if (addr >= L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1)
 	    && addr + size <= L1_DATA_B_START + L1_DATA_B_LENGTH)
 		return 1;
+#endif
+#if L2_LENGTH != 0
+	if (addr >= L2_START + (_ebss_l2 - _stext_l2)
+	    && addr + size <= L2_START + L2_LENGTH)
+		return 1;
 #endif
 	return 0;
 }

trunk/arch/blackfin/kernel/setup.c

@@ -119,23 +119,23 @@ void __init bfin_relocate_l1_mem(void)
 	/* Copy _stext_l1 to _etext_l1 to L1 instruction SRAM */
 	dma_memcpy(_stext_l1, _l1_lma_start, l1_code_length);
 
-	l1_data_a_length = _ebss_l1 - _sdata_l1;
+	l1_data_a_length = _sbss_l1 - _sdata_l1;
 	if (l1_data_a_length > L1_DATA_A_LENGTH)
 		panic("L1 Data SRAM Bank A Overflow\n");
 
-	/* Copy _sdata_l1 to _ebss_l1 to L1 data bank A SRAM */
+	/* Copy _sdata_l1 to _sbss_l1 to L1 data bank A SRAM */
 	dma_memcpy(_sdata_l1, _l1_lma_start + l1_code_length, l1_data_a_length);
 
-	l1_data_b_length = _ebss_b_l1 - _sdata_b_l1;
+	l1_data_b_length = _sbss_b_l1 - _sdata_b_l1;
 	if (l1_data_b_length > L1_DATA_B_LENGTH)
 		panic("L1 Data SRAM Bank B Overflow\n");
 
-	/* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */
+	/* Copy _sdata_b_l1 to _sbss_b_l1 to L1 data bank B SRAM */
 	dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length +
 			l1_data_a_length, l1_data_b_length);
 
 	if (L2_LENGTH != 0) {
-		l2_length = _ebss_l2 - _stext_l2;
+		l2_length = _sbss_l2 - _stext_l2;
 		if (l2_length > L2_LENGTH)
 			panic("L2 SRAM Overflow\n");
 
@@ -827,7 +827,7 @@ void __init setup_arch(char **cmdline_p)
 				printk(KERN_ERR "Warning: Compiled for Rev %d, but running on Rev %d\n",
 				       bfin_compiled_revid(), bfin_revid());
 		}
-		if (bfin_revid() <= CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
+		if (bfin_revid() < CONFIG_BF_REV_MIN || bfin_revid() > CONFIG_BF_REV_MAX)
 			printk(KERN_ERR "Warning: Unsupported Chip Revision ADSP-%s Rev 0.%d detected\n",
 			       CPU, bfin_revid());
 	}

trunk/arch/blackfin/kernel/traps.c

@@ -59,7 +59,7 @@
 #endif
 
 
-#ifdef CONFIG_VERBOSE_DEBUG
+#ifdef CONFIG_DEBUG_VERBOSE
 #define verbose_printk(fmt, arg...) \
 	printk(fmt, ##arg)
 #else
@@ -147,9 +147,12 @@ static void decode_address(char *buf, unsigned long address)
 				char *name = p->comm;
 				struct file *file = vma->vm_file;
 
-				if (file)
-					name = d_path(&file->f_path, _tmpbuf,
+				if (file) {
+					char *d_name = d_path(&file->f_path, _tmpbuf,
 						      sizeof(_tmpbuf));
+					if (!IS_ERR(d_name))
+						name = d_name;
+				}
 
 				/* FLAT does not have its text aligned to the start of
 				 * the map while FDPIC ELF does ...
@@ -571,7 +574,7 @@ asmlinkage void trap_c(struct pt_regs *fp)
 #endif
 			panic("Kernel exception");
 		} else {
-#ifdef CONFIG_VERBOSE_DEBUG
+#ifdef CONFIG_DEBUG_VERBOSE
 			unsigned long *stack;
 			/* Dump the user space stack */
 			stack = (unsigned long *)rdusp();

trunk/arch/blackfin/mach-common/cache.S

@@ -25,9 +25,13 @@
  */
 .macro do_flush flushins:req optflushins optnopins label
 
+	R2 = -L1_CACHE_BYTES;
+
+	/* start = (start & -L1_CACHE_BYTES) */
+	R0 = R0 & R2;
+
 	/* end = ((end - 1) & -L1_CACHE_BYTES) + L1_CACHE_BYTES; */
 	R1 += -1;
-	R2 = -L1_CACHE_BYTES;
 	R1 = R1 & R2;
 	R1 += L1_CACHE_BYTES;
 
@@ -63,7 +67,7 @@ ENDPROC(_blackfin_icache_flush_range)
 
 /* Flush all cache lines assocoiated with this area of memory. */
 ENTRY(_blackfin_icache_dcache_flush_range)
-	do_flush IFLUSH, FLUSH
+	do_flush FLUSH, IFLUSH
 ENDPROC(_blackfin_icache_dcache_flush_range)
 
 /* Throw away all D-cached data in specified region without any obligation to