---

yaml
---
r: 149920
b: refs/heads/master
c: 4808368
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d8052319f2a7d1ee86248df00193110ad1946a33
+refs/heads/master: 4808368dad3263ac46e71f037c0dcd2dcf082525

trunk/drivers/net/wireless/iwlwifi/iwl-agn.c

@@ -2036,139 +2036,6 @@ static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
 	return NETDEV_TX_OK;
 }
 
-/**
- * iwl_mac_config - mac80211 config callback
- *
- * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
- * be set inappropriately and the driver currently sets the hardware up to
- * use it whenever needed.
- */
-static int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
-{
-	struct iwl_priv *priv = hw->priv;
-	const struct iwl_channel_info *ch_info;
-	struct ieee80211_conf *conf = &hw->conf;
-	unsigned long flags = 0;
-	int ret = 0;
-	u16 ch;
-	int scan_active = 0;
-
-	mutex_lock(&priv->mutex);
-	IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
-					conf->channel->hw_value, changed);
-
-	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
-			test_bit(STATUS_SCANNING, &priv->status))) {
-		scan_active = 1;
-		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
-	}
-
-
-	/* during scanning mac80211 will delay channel setting until
-	 * scan finish with changed = 0
-	 */
-	if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
-		if (scan_active)
-			goto set_ch_out;
-
-		ch = ieee80211_frequency_to_channel(conf->channel->center_freq);
-		ch_info = iwl_get_channel_info(priv, conf->channel->band, ch);
-		if (!is_channel_valid(ch_info)) {
-			IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
-			ret = -EINVAL;
-			goto set_ch_out;
-		}
-
-		if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
-			!is_channel_ibss(ch_info)) {
-			IWL_ERR(priv, "channel %d in band %d not "
-				"IBSS channel\n",
-				conf->channel->hw_value, conf->channel->band);
-			ret = -EINVAL;
-			goto set_ch_out;
-		}
-
-		priv->current_ht_config.is_ht = conf_is_ht(conf);
-
-		spin_lock_irqsave(&priv->lock, flags);
-
-
-		/* if we are switching from ht to 2.4 clear flags
-		 * from any ht related info since 2.4 does not
-		 * support ht */
-		if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
-			priv->staging_rxon.flags = 0;
-
-		iwl_set_rxon_channel(priv, conf->channel);
-
-		iwl_set_flags_for_band(priv, conf->channel->band);
-		spin_unlock_irqrestore(&priv->lock, flags);
- set_ch_out:
-		/* The list of supported rates and rate mask can be different
-		 * for each band; since the band may have changed, reset
-		 * the rate mask to what mac80211 lists */
-		iwl_set_rate(priv);
-	}
-
-	if (changed & IEEE80211_CONF_CHANGE_PS) {
-		if (conf->flags & IEEE80211_CONF_PS)
-			ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3);
-		else
-			ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
-		if (ret)
-			IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
-
-	}
-
-	if (changed & IEEE80211_CONF_CHANGE_POWER) {
-		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
-			priv->tx_power_user_lmt, conf->power_level);
-
-		iwl_set_tx_power(priv, conf->power_level, false);
-	}
-
-	/* call to ensure that 4965 rx_chain is set properly in monitor mode */
-	if (priv->cfg->ops->hcmd->set_rxon_chain)
-		priv->cfg->ops->hcmd->set_rxon_chain(priv);
-
-	if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
-		if (conf->radio_enabled &&
-			iwl_radio_kill_sw_enable_radio(priv)) {
-			IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - "
-						"waiting for uCode\n");
-			goto out;
-		}
-
-		if (!conf->radio_enabled)
-			iwl_radio_kill_sw_disable_radio(priv);
-	}
-
-	if (!conf->radio_enabled) {
-		IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
-		goto out;
-	}
-
-	if (!iwl_is_ready(priv)) {
-		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
-		goto out;
-	}
-
-	if (scan_active)
-		goto out;
-
-	if (memcmp(&priv->active_rxon,
-		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
-		iwlcore_commit_rxon(priv);
-	else
-		IWL_DEBUG_INFO(priv, "No re-sending same RXON configuration.\n");
-
-
-out:
-	IWL_DEBUG_MAC80211(priv, "leave\n");
-	mutex_unlock(&priv->mutex);
-	return ret;
-}
-
 static void iwl_config_ap(struct iwl_priv *priv)
 {
 	int ret = 0;

trunk/drivers/net/wireless/iwlwifi/iwl-core.c

@@ -2443,6 +2443,142 @@ void iwl_mac_remove_interface(struct ieee80211_hw *hw,
 }
 EXPORT_SYMBOL(iwl_mac_remove_interface);
 
+/**
+ * iwl_mac_config - mac80211 config callback
+ *
+ * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to
+ * be set inappropriately and the driver currently sets the hardware up to
+ * use it whenever needed.
+ */
+int iwl_mac_config(struct ieee80211_hw *hw, u32 changed)
+{
+	struct iwl_priv *priv = hw->priv;
+	const struct iwl_channel_info *ch_info;
+	struct ieee80211_conf *conf = &hw->conf;
+	unsigned long flags = 0;
+	int ret = 0;
+	u16 ch;
+	int scan_active = 0;
+
+	mutex_lock(&priv->mutex);
+
+	if (!iwl_is_ready(priv)) {
+		IWL_DEBUG_MAC80211(priv, "leave - not ready\n");
+		ret = -EIO;
+		goto out;
+	}
+
+	IWL_DEBUG_MAC80211(priv, "enter to channel %d changed 0x%X\n",
+					conf->channel->hw_value, changed);
+
+	if (unlikely(!priv->cfg->mod_params->disable_hw_scan &&
+			test_bit(STATUS_SCANNING, &priv->status))) {
+		scan_active = 1;
+		IWL_DEBUG_MAC80211(priv, "leave - scanning\n");
+	}
+
+
+	/* during scanning mac80211 will delay channel setting until
+	 * scan finish with changed = 0
+	 */
+	if (!changed || (changed & IEEE80211_CONF_CHANGE_CHANNEL)) {
+		if (scan_active)
+			goto set_ch_out;
+
+		ch = ieee80211_frequency_to_channel(conf->channel->center_freq);
+		ch_info = iwl_get_channel_info(priv, conf->channel->band, ch);
+		if (!is_channel_valid(ch_info)) {
+			IWL_DEBUG_MAC80211(priv, "leave - invalid channel\n");
+			ret = -EINVAL;
+			goto set_ch_out;
+		}
+
+		if (priv->iw_mode == NL80211_IFTYPE_ADHOC &&
+			!is_channel_ibss(ch_info)) {
+			IWL_ERR(priv, "channel %d in band %d not "
+				"IBSS channel\n",
+				conf->channel->hw_value, conf->channel->band);
+			ret = -EINVAL;
+			goto set_ch_out;
+		}
+
+		priv->current_ht_config.is_ht = conf_is_ht(conf);
+
+		spin_lock_irqsave(&priv->lock, flags);
+
+
+		/* if we are switching from ht to 2.4 clear flags
+		 * from any ht related info since 2.4 does not
+		 * support ht */
+		if ((le16_to_cpu(priv->staging_rxon.channel) != ch))
+			priv->staging_rxon.flags = 0;
+
+		iwl_set_rxon_channel(priv, conf->channel);
+
+		iwl_set_flags_for_band(priv, conf->channel->band);
+		spin_unlock_irqrestore(&priv->lock, flags);
+ set_ch_out:
+		/* The list of supported rates and rate mask can be different
+		 * for each band; since the band may have changed, reset
+		 * the rate mask to what mac80211 lists */
+		iwl_set_rate(priv);
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_PS) {
+		if (conf->flags & IEEE80211_CONF_PS)
+			ret = iwl_power_set_user_mode(priv, IWL_POWER_INDEX_3);
+		else
+			ret = iwl_power_set_user_mode(priv, IWL_POWER_MODE_CAM);
+		if (ret)
+			IWL_DEBUG_MAC80211(priv, "Error setting power level\n");
+
+	}
+
+	if (changed & IEEE80211_CONF_CHANGE_POWER) {
+		IWL_DEBUG_MAC80211(priv, "TX Power old=%d new=%d\n",
+			priv->tx_power_user_lmt, conf->power_level);
+
+		iwl_set_tx_power(priv, conf->power_level, false);
+	}
+
+	/* call to ensure that 4965 rx_chain is set properly in monitor mode */
+	if (priv->cfg->ops->hcmd->set_rxon_chain)
+		priv->cfg->ops->hcmd->set_rxon_chain(priv);
+
+	if (changed & IEEE80211_CONF_CHANGE_RADIO_ENABLED) {
+		if (conf->radio_enabled &&
+			iwl_radio_kill_sw_enable_radio(priv)) {
+			IWL_DEBUG_MAC80211(priv, "leave - RF-KILL - "
+						"waiting for uCode\n");
+			goto out;
+		}
+
+		if (!conf->radio_enabled)
+			iwl_radio_kill_sw_disable_radio(priv);
+	}
+
+	if (!conf->radio_enabled) {
+		IWL_DEBUG_MAC80211(priv, "leave - radio disabled\n");
+		goto out;
+	}
+
+	if (scan_active)
+		goto out;
+
+	if (memcmp(&priv->active_rxon,
+		   &priv->staging_rxon, sizeof(priv->staging_rxon)))
+		iwlcore_commit_rxon(priv);
+	else
+		IWL_DEBUG_INFO(priv, "Not re-sending same RXON configuration.\n");
+
+
+out:
+	IWL_DEBUG_MAC80211(priv, "leave\n");
+	mutex_unlock(&priv->mutex);
+	return ret;
+}
+EXPORT_SYMBOL(iwl_mac_config);
+
 #ifdef CONFIG_PM
 
 int iwl_pci_suspend(struct pci_dev *pdev, pm_message_t state)

trunk/drivers/net/wireless/iwlwifi/iwl-core.h

@@ -278,6 +278,7 @@ int iwl_mac_add_interface(struct ieee80211_hw *hw,
 				 struct ieee80211_if_init_conf *conf);
 void iwl_mac_remove_interface(struct ieee80211_hw *hw,
 				 struct ieee80211_if_init_conf *conf);
+int iwl_mac_config(struct ieee80211_hw *hw, u32 changed);
 
 /*****************************************************
  * RX handlers.