---

yaml
---
r: 304215
b: refs/heads/master
c: 22886ee
h: refs/heads/master
i:
  304213: 8cf3417
  304211: 1926360
  304207: 09259e5
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 8b979f7c6bf13a57e7b6002f1175312a44773960
+refs/heads/master: 22886ee96895b7a9f9d06da4dc9420b61b4ef1f7

trunk/drivers/tty/serial/8250/8250_em.c

@@ -0,0 +1,178 @@
+/*
+ * Renesas Emma Mobile 8250 driver
+ *
+ *  Copyright (C) 2012 Magnus Damm
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+
+#include "8250.h"
+
+#define UART_DLL_EM 9
+#define UART_DLM_EM 10
+
+struct serial8250_em_priv {
+	struct clk *sclk;
+	int line;
+};
+
+static void serial8250_em_serial_out(struct uart_port *p, int offset, int value)
+{
+	switch (offset) {
+	case UART_TX: /* TX @ 0x00 */
+		writeb(value, p->membase);
+		break;
+	case UART_FCR: /* FCR @ 0x0c (+1) */
+	case UART_LCR: /* LCR @ 0x10 (+1) */
+	case UART_MCR: /* MCR @ 0x14 (+1) */
+	case UART_SCR: /* SCR @ 0x20 (+1) */
+		writel(value, p->membase + ((offset + 1) << 2));
+		break;
+	case UART_IER: /* IER @ 0x04 */
+		value &= 0x0f; /* only 4 valid bits - not Xscale */
+		/* fall-through */
+	case UART_DLL_EM: /* DLL @ 0x24 (+9) */
+	case UART_DLM_EM: /* DLM @ 0x28 (+9) */
+		writel(value, p->membase + (offset << 2));
+	}
+}
+
+static unsigned int serial8250_em_serial_in(struct uart_port *p, int offset)
+{
+	switch (offset) {
+	case UART_RX: /* RX @ 0x00 */
+		return readb(p->membase);
+	case UART_MCR: /* MCR @ 0x14 (+1) */
+	case UART_LSR: /* LSR @ 0x18 (+1) */
+	case UART_MSR: /* MSR @ 0x1c (+1) */
+	case UART_SCR: /* SCR @ 0x20 (+1) */
+		return readl(p->membase + ((offset + 1) << 2));
+	case UART_IER: /* IER @ 0x04 */
+	case UART_IIR: /* IIR @ 0x08 */
+	case UART_DLL_EM: /* DLL @ 0x24 (+9) */
+	case UART_DLM_EM: /* DLM @ 0x28 (+9) */
+		return readl(p->membase + (offset << 2));
+	}
+	return 0;
+}
+
+static int serial8250_em_serial_dl_read(struct uart_8250_port *up)
+{
+	return serial_in(up, UART_DLL_EM) | serial_in(up, UART_DLM_EM) << 8;
+}
+
+static void serial8250_em_serial_dl_write(struct uart_8250_port *up, int value)
+{
+	serial_out(up, UART_DLL_EM, value & 0xff);
+	serial_out(up, UART_DLM_EM, value >> 8 & 0xff);
+}
+
+static int __devinit serial8250_em_probe(struct platform_device *pdev)
+{
+	struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+	struct serial8250_em_priv *priv;
+	struct uart_8250_port up;
+	int ret = -EINVAL;
+
+	if (!regs || !irq) {
+		dev_err(&pdev->dev, "missing registers or irq\n");
+		goto err0;
+	}
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&pdev->dev, "unable to allocate private data\n");
+		ret = -ENOMEM;
+		goto err0;
+	}
+
+	priv->sclk = clk_get(&pdev->dev, "sclk");
+	if (!priv->sclk) {
+		dev_err(&pdev->dev, "unable to get clock\n");
+		goto err1;
+	}
+
+	memset(&up, 0, sizeof(up));
+	up.port.mapbase = regs->start;
+	up.port.irq = irq->start;
+	up.port.type = PORT_UNKNOWN;
+	up.port.flags = UPF_BOOT_AUTOCONF | UPF_FIXED_PORT | UPF_IOREMAP;
+	up.port.dev = &pdev->dev;
+	up.port.private_data = priv;
+
+	clk_enable(priv->sclk);
+	up.port.uartclk = clk_get_rate(priv->sclk);
+
+	up.port.iotype = UPIO_MEM32;
+	up.port.serial_in = serial8250_em_serial_in;
+	up.port.serial_out = serial8250_em_serial_out;
+	up.dl_read = serial8250_em_serial_dl_read;
+	up.dl_write = serial8250_em_serial_dl_write;
+
+	ret = serial8250_register_8250_port(&up);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to register 8250 port\n");
+		goto err2;
+	}
+
+	priv->line = ret;
+	platform_set_drvdata(pdev, priv);
+	return 0;
+
+ err2:
+	clk_disable(priv->sclk);
+	clk_put(priv->sclk);
+ err1:
+	kfree(priv);
+ err0:
+	return ret;
+}
+
+static int __devexit serial8250_em_remove(struct platform_device *pdev)
+{
+	struct serial8250_em_priv *priv = platform_get_drvdata(pdev);
+
+	serial8250_unregister_port(priv->line);
+	clk_disable(priv->sclk);
+	clk_put(priv->sclk);
+	kfree(priv);
+	return 0;
+}
+
+static struct platform_driver serial8250_em_platform_driver = {
+	.driver = {
+		.name		= "serial8250-em",
+		.owner		= THIS_MODULE,
+	},
+	.probe			= serial8250_em_probe,
+	.remove			= __devexit_p(serial8250_em_remove),
+};
+
+module_platform_driver(serial8250_em_platform_driver);
+
+MODULE_AUTHOR("Magnus Damm");
+MODULE_DESCRIPTION("Renesas Emma Mobile 8250 Driver");
+MODULE_LICENSE("GPL v2");

trunk/drivers/tty/serial/8250/Kconfig

@@ -278,3 +278,11 @@ config SERIAL_8250_DW
 	help
 	  Selecting this option will enable handling of the extra features
 	  present in the Synopsys DesignWare APB UART.
+
+config SERIAL_8250_EM
+	tristate "Support for Emma Mobile intergrated serial port"
+	depends on SERIAL_8250 && ARM && HAVE_CLK
+	help
+	  Selecting this option will add support for the integrated serial
+	  port hardware found on the Emma Mobile line of processors.
+	  If unsure, say N.

trunk/drivers/tty/serial/8250/Makefile

@@ -18,3 +18,4 @@ obj-$(CONFIG_SERIAL_8250_HUB6)		+= 8250_hub6.o
 obj-$(CONFIG_SERIAL_8250_MCA)		+= 8250_mca.o
 obj-$(CONFIG_SERIAL_8250_FSL)		+= 8250_fsl.o
 obj-$(CONFIG_SERIAL_8250_DW)		+= 8250_dw.o
+obj-$(CONFIG_SERIAL_8250_EM)		+= 8250_em.o