Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/gi…

…t/linville/wireless-2.6

drivers/net/wireless/ath/ath5k/eeprom.c

@@ -97,7 +97,7 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah)
 	struct ath5k_eeprom_info *ee = &ah->ah_capabilities.cap_eeprom;
 	int ret;
 	u16 val;
-	u32 cksum, offset;
+	u32 cksum, offset, eep_max = AR5K_EEPROM_INFO_MAX;
 
 	/*
 	 * Read values from EEPROM and store them in the capability structure
@@ -116,12 +116,38 @@ ath5k_eeprom_init_header(struct ath5k_hw *ah)
 	 * Validate the checksum of the EEPROM date. There are some
 	 * devices with invalid EEPROMs.
 	 */
-	for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
+	AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_UPPER, val);
+	if (val) {
+		eep_max = (val & AR5K_EEPROM_SIZE_UPPER_MASK) <<
+			   AR5K_EEPROM_SIZE_ENDLOC_SHIFT;
+		AR5K_EEPROM_READ(AR5K_EEPROM_SIZE_LOWER, val);
+		eep_max = (eep_max | val) - AR5K_EEPROM_INFO_BASE;
+
+		/*
+		 * Fail safe check to prevent stupid loops due
+		 * to busted EEPROMs. XXX: This value is likely too
+		 * big still, waiting on a better value.
+		 */
+		if (eep_max > (3 * AR5K_EEPROM_INFO_MAX)) {
+			ATH5K_ERR(ah->ah_sc, "Invalid max custom EEPROM size: "
+				  "%d (0x%04x) max expected: %d (0x%04x)\n",
+				  eep_max, eep_max,
+				  3 * AR5K_EEPROM_INFO_MAX,
+				  3 * AR5K_EEPROM_INFO_MAX);
+			return -EIO;
+		}
+	}
+
+	for (cksum = 0, offset = 0; offset < eep_max; offset++) {
 		AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
 		cksum ^= val;
 	}
 	if (cksum != AR5K_EEPROM_INFO_CKSUM) {
-		ATH5K_ERR(ah->ah_sc, "Invalid EEPROM checksum 0x%04x\n", cksum);
+		ATH5K_ERR(ah->ah_sc, "Invalid EEPROM "
+			  "checksum: 0x%04x eep_max: 0x%04x (%s)\n",
+			  cksum, eep_max,
+			  eep_max == AR5K_EEPROM_INFO_MAX ?
+				"default size" : "custom size");
 		return -EIO;
 	}
 

drivers/net/wireless/ath/ath5k/eeprom.h

@@ -37,6 +37,14 @@
 #define AR5K_EEPROM_RFKILL_POLARITY_S	1
 
 #define AR5K_EEPROM_REG_DOMAIN		0x00bf	/* EEPROM regdom */
+
+/* FLASH(EEPROM) Defines for AR531X chips */
+#define AR5K_EEPROM_SIZE_LOWER		0x1b /* size info -- lower */
+#define AR5K_EEPROM_SIZE_UPPER		0x1c /* size info -- upper */
+#define AR5K_EEPROM_SIZE_UPPER_MASK	0xfff0
+#define AR5K_EEPROM_SIZE_UPPER_SHIFT	4
+#define AR5K_EEPROM_SIZE_ENDLOC_SHIFT	12
+
 #define AR5K_EEPROM_CHECKSUM		0x00c0	/* EEPROM checksum */
 #define AR5K_EEPROM_INFO_BASE		0x00c0	/* EEPROM header */
 #define AR5K_EEPROM_INFO_MAX		(0x400 - AR5K_EEPROM_INFO_BASE)

drivers/net/wireless/ath/ath9k/Kconfig

@@ -25,7 +25,7 @@ config ATH9K
 
 config ATH9K_DEBUGFS
 	bool "Atheros ath9k debugging"
-	depends on ATH9K
+	depends on ATH9K && DEBUG_FS
 	---help---
 	  Say Y, if you need access to ath9k's statistics for
 	  interrupts, rate control, etc.

drivers/net/wireless/ath/ath9k/ath9k.h

@@ -33,11 +33,11 @@ struct ath_node;
 
 /* Macro to expand scalars to 64-bit objects */
 
-#define	ito64(x) (sizeof(x) == 8) ?			\
+#define	ito64(x) (sizeof(x) == 1) ?			\
 	(((unsigned long long int)(x)) & (0xff)) :	\
-	(sizeof(x) == 16) ?				\
+	(sizeof(x) == 2) ?				\
 	(((unsigned long long int)(x)) & 0xffff) :	\
-	((sizeof(x) == 32) ?				\
+	((sizeof(x) == 4) ?				\
 	 (((unsigned long long int)(x)) & 0xffffffff) : \
 	 (unsigned long long int)(x))
 

drivers/net/wireless/iwlwifi/iwl-4965.c

@@ -1961,7 +1961,7 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv,
 	struct ieee80211_tx_info *info;
 	struct iwl4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
 	u32  status = le32_to_cpu(tx_resp->u.status);
-	int tid = MAX_TID_COUNT;
+	int uninitialized_var(tid);
 	int sta_id;
 	int freed;
 	u8 *qc = NULL;

drivers/net/wireless/iwlwifi/iwl-core.c

@@ -2344,6 +2344,21 @@ static void iwl_ht_conf(struct iwl_priv *priv,
 	IWL_DEBUG_MAC80211(priv, "leave\n");
 }
 
+static inline void iwl_set_no_assoc(struct iwl_priv *priv)
+{
+	priv->assoc_id = 0;
+	iwl_led_disassociate(priv);
+	/*
+	 * inform the ucode that there is no longer an
+	 * association and that no more packets should be
+	 * sent
+	 */
+	priv->staging_rxon.filter_flags &=
+		~RXON_FILTER_ASSOC_MSK;
+	priv->staging_rxon.assoc_id = 0;
+	iwlcore_commit_rxon(priv);
+}
+
 #define IWL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
 void iwl_bss_info_changed(struct ieee80211_hw *hw,
 			  struct ieee80211_vif *vif,
@@ -2475,20 +2490,8 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
 					IWL_DELAY_NEXT_SCAN_AFTER_ASSOC;
 			if (!iwl_is_rfkill(priv))
 				priv->cfg->ops->lib->post_associate(priv);
-		} else {
-			priv->assoc_id = 0;
-			iwl_led_disassociate(priv);
-
-			/*
-			 * inform the ucode that there is no longer an
-			 * association and that no more packets should be
-			 * send
-			 */
-			priv->staging_rxon.filter_flags &=
-				~RXON_FILTER_ASSOC_MSK;
-			priv->staging_rxon.assoc_id = 0;
-			iwlcore_commit_rxon(priv);
-		}
+		} else
+			iwl_set_no_assoc(priv);
 	}
 
 	if (changes && iwl_is_associated(priv) && priv->assoc_id) {
@@ -2503,12 +2506,14 @@ void iwl_bss_info_changed(struct ieee80211_hw *hw,
 		}
 	}
 
-	if ((changes & BSS_CHANGED_BEACON_ENABLED) &&
-	    vif->bss_conf.enable_beacon) {
-		memcpy(priv->staging_rxon.bssid_addr,
-		       bss_conf->bssid, ETH_ALEN);
-		memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
-		iwlcore_config_ap(priv);
+	if (changes & BSS_CHANGED_BEACON_ENABLED) {
+		if (vif->bss_conf.enable_beacon) {
+			memcpy(priv->staging_rxon.bssid_addr,
+			       bss_conf->bssid, ETH_ALEN);
+			memcpy(priv->bssid, bss_conf->bssid, ETH_ALEN);
+			iwlcore_config_ap(priv);
+		} else
+			iwl_set_no_assoc(priv);
 	}
 
 	mutex_unlock(&priv->mutex);

drivers/net/wireless/iwlwifi/iwl-dev.h

@@ -711,7 +711,7 @@ extern void iwl_txq_ctx_stop(struct iwl_priv *priv);
 extern int iwl_queue_space(const struct iwl_queue *q);
 static inline int iwl_queue_used(const struct iwl_queue *q, int i)
 {
-	return q->write_ptr > q->read_ptr ?
+	return q->write_ptr >= q->read_ptr ?
 		(i >= q->read_ptr && i < q->write_ptr) :
 		!(i < q->read_ptr && i >= q->write_ptr);
 }

drivers/net/wireless/mwl8k.c

@@ -3157,8 +3157,10 @@ static void mwl8k_configure_filter(struct ieee80211_hw *hw,
 	/* Clear unsupported feature flags */
 	*total_flags &= FIF_ALLMULTI | FIF_BCN_PRBRESP_PROMISC;
 
-	if (mwl8k_fw_lock(hw))
+	if (mwl8k_fw_lock(hw)) {
+		kfree(cmd);
 		return;
+	}
 
 	if (priv->sniffer_enabled) {
 		mwl8k_enable_sniffer(hw, 0);

drivers/net/wireless/rt2x00/rt2800lib.c

@@ -340,7 +340,7 @@ static int rt2800_blink_set(struct led_classdev *led_cdev,
 	rt2x00_set_field32(&reg, LED_CFG_OFF_PERIOD, *delay_off);
 	rt2x00_set_field32(&reg, LED_CFG_SLOW_BLINK_PERIOD, 3);
 	rt2x00_set_field32(&reg, LED_CFG_R_LED_MODE, 3);
-	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 12);
+	rt2x00_set_field32(&reg, LED_CFG_G_LED_MODE, 3);
 	rt2x00_set_field32(&reg, LED_CFG_Y_LED_MODE, 3);
 	rt2x00_set_field32(&reg, LED_CFG_LED_POLAR, 1);
 	rt2800_register_write(led->rt2x00dev, LED_CFG, reg);

drivers/net/wireless/rt2x00/rt2x00.h

@@ -112,6 +112,12 @@
 #define ALIGN_SIZE(__skb, __header) \
 	(  ((unsigned long)((__skb)->data + (__header))) & 3 )
 
+/*
+ * Constants for extra TX headroom for alignment purposes.
+ */
+#define RT2X00_ALIGN_SIZE	4 /* Only whole frame needs alignment */
+#define RT2X00_L2PAD_SIZE	8 /* Both header & payload need alignment */
+
 /*
  * Standard timing and size defines.
  * These values should follow the ieee80211 specifications.

drivers/net/wireless/rt2x00/rt2x00dev.c

@@ -686,7 +686,17 @@ static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
 	/*
 	 * Initialize extra TX headroom required.
 	 */
-	rt2x00dev->hw->extra_tx_headroom = rt2x00dev->ops->extra_tx_headroom;
+	rt2x00dev->hw->extra_tx_headroom =
+		max_t(unsigned int, IEEE80211_TX_STATUS_HEADROOM,
+		      rt2x00dev->ops->extra_tx_headroom);
+
+	/*
+	 * Take TX headroom required for alignment into account.
+	 */
+	if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags))
+		rt2x00dev->hw->extra_tx_headroom += RT2X00_L2PAD_SIZE;
+	else if (test_bit(DRIVER_REQUIRE_DMA, &rt2x00dev->flags))
+		rt2x00dev->hw->extra_tx_headroom += RT2X00_ALIGN_SIZE;
 
 	/*
 	 * Register HW.

drivers/net/wireless/rt2x00/rt2x00queue.c

@@ -104,15 +104,15 @@ void rt2x00queue_map_txskb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 	 * is also mapped to the DMA so it can be used for transfering
 	 * additional descriptor information to the hardware.
 	 */
-	skb_push(skb, rt2x00dev->hw->extra_tx_headroom);
+	skb_push(skb, rt2x00dev->ops->extra_tx_headroom);
 
 	skbdesc->skb_dma =
 	    dma_map_single(rt2x00dev->dev, skb->data, skb->len, DMA_TO_DEVICE);
 
 	/*
 	 * Restore data pointer to original location again.
 	 */
-	skb_pull(skb, rt2x00dev->hw->extra_tx_headroom);
+	skb_pull(skb, rt2x00dev->ops->extra_tx_headroom);
 
 	skbdesc->flags |= SKBDESC_DMA_MAPPED_TX;
 }
@@ -134,7 +134,7 @@ void rt2x00queue_unmap_skb(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb)
 		 * by the driver, but it was actually mapped to DMA.
 		 */
 		dma_unmap_single(rt2x00dev->dev, skbdesc->skb_dma,
-				 skb->len + rt2x00dev->hw->extra_tx_headroom,
+				 skb->len + rt2x00dev->ops->extra_tx_headroom,
 				 DMA_TO_DEVICE);
 		skbdesc->flags &= ~SKBDESC_DMA_MAPPED_TX;
 	}

drivers/net/wireless/zd1211rw/zd_mac.c

@@ -987,12 +987,13 @@ static void zd_op_configure_filter(struct ieee80211_hw *hw,
 	changed_flags &= SUPPORTED_FIF_FLAGS;
 	*new_flags &= SUPPORTED_FIF_FLAGS;
 
-	/* changed_flags is always populated but this driver
-	 * doesn't support all FIF flags so its possible we don't
-	 * need to do anything */
-	if (!changed_flags)
-		return;
-
+	/*
+	 * If multicast parameter (as returned by zd_op_prepare_multicast)
+	 * has changed, no bit in changed_flags is set. To handle this
+	 * situation, we do not return if changed_flags is 0. If we do so,
+	 * we will have some issue with IPv6 which uses multicast for link
+	 * layer address resolution.
+	 */
 	if (*new_flags & (FIF_PROMISC_IN_BSS | FIF_ALLMULTI))
 		zd_mc_add_all(&hash);
 

net/mac80211/iface.c

@@ -15,12 +15,14 @@
 #include <linux/netdevice.h>
 #include <linux/rtnetlink.h>
 #include <net/mac80211.h>
+#include <net/ieee80211_radiotap.h>
 #include "ieee80211_i.h"
 #include "sta_info.h"
 #include "debugfs_netdev.h"
 #include "mesh.h"
 #include "led.h"
 #include "driver-ops.h"
+#include "wme.h"
 
 /**
  * DOC: Interface list locking
@@ -314,7 +316,7 @@ static int ieee80211_open(struct net_device *dev)
 	if (sdata->vif.type == NL80211_IFTYPE_STATION)
 		ieee80211_queue_work(&local->hw, &sdata->u.mgd.work);
 
-	netif_start_queue(dev);
+	netif_tx_start_all_queues(dev);
 
 	return 0;
  err_del_interface:
@@ -343,7 +345,7 @@ static int ieee80211_stop(struct net_device *dev)
 	/*
 	 * Stop TX on this interface first.
 	 */
-	netif_stop_queue(dev);
+	netif_tx_stop_all_queues(dev);
 
 	/*
 	 * Now delete all active aggregation sessions.
@@ -644,6 +646,12 @@ static void ieee80211_teardown_sdata(struct net_device *dev)
 	WARN_ON(flushed);
 }
 
+static u16 ieee80211_netdev_select_queue(struct net_device *dev,
+					 struct sk_buff *skb)
+{
+	return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
+}
+
 static const struct net_device_ops ieee80211_dataif_ops = {
 	.ndo_open		= ieee80211_open,
 	.ndo_stop		= ieee80211_stop,
@@ -652,8 +660,38 @@ static const struct net_device_ops ieee80211_dataif_ops = {
 	.ndo_set_multicast_list = ieee80211_set_multicast_list,
 	.ndo_change_mtu 	= ieee80211_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_select_queue	= ieee80211_netdev_select_queue,
 };
 
+static u16 ieee80211_monitor_select_queue(struct net_device *dev,
+					  struct sk_buff *skb)
+{
+	struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
+	struct ieee80211_local *local = sdata->local;
+	struct ieee80211_hdr *hdr;
+	struct ieee80211_radiotap_header *rtap = (void *)skb->data;
+	u8 *p;
+
+	if (local->hw.queues < 4)
+		return 0;
+
+	if (skb->len < 4 ||
+	    skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */)
+		return 0; /* doesn't matter, frame will be dropped */
+
+	hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len));
+
+	if (!ieee80211_is_data_qos(hdr->frame_control)) {
+		skb->priority = 7;
+		return ieee802_1d_to_ac[skb->priority];
+	}
+
+	p = ieee80211_get_qos_ctl(hdr);
+	skb->priority = *p & IEEE80211_QOS_CTL_TAG1D_MASK;
+
+	return ieee80211_downgrade_queue(local, skb);
+}
+
 static const struct net_device_ops ieee80211_monitorif_ops = {
 	.ndo_open		= ieee80211_open,
 	.ndo_stop		= ieee80211_stop,
@@ -662,6 +700,7 @@ static const struct net_device_ops ieee80211_monitorif_ops = {
 	.ndo_set_multicast_list = ieee80211_set_multicast_list,
 	.ndo_change_mtu 	= ieee80211_change_mtu,
 	.ndo_set_mac_address 	= eth_mac_addr,
+	.ndo_select_queue	= ieee80211_monitor_select_queue,
 };
 
 static void ieee80211_if_setup(struct net_device *dev)
@@ -768,8 +807,8 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name,
 
 	ASSERT_RTNL();
 
-	ndev = alloc_netdev(sizeof(*sdata) + local->hw.vif_data_size,
-			    name, ieee80211_if_setup);
+	ndev = alloc_netdev_mq(sizeof(*sdata) + local->hw.vif_data_size,
+			       name, ieee80211_if_setup, local->hw.queues);
 	if (!ndev)
 		return -ENOMEM;
 	dev_net_set(ndev, wiphy_net(local->hw.wiphy));