---

yaml
---
r: 232929
b: refs/heads/master
c: 15ccb7b
h: refs/heads/master
i:
  232927: 4f91775
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 862b6f62bf0cd768910b087f6d051f420206c4d6
+refs/heads/master: 15ccb7b429d341605296b6a654b414f2b3ae9fd3

trunk/Documentation/networking/ip-sysctl.txt

@@ -187,7 +187,7 @@ tcp_cookie_size - INTEGER
 tcp_dsack - BOOLEAN
 	Allows TCP to send "duplicate" SACKs.
 
-tcp_ecn - BOOLEAN
+tcp_ecn - INTEGER
 	Enable Explicit Congestion Notification (ECN) in TCP. ECN is only
 	used when both ends of the TCP flow support it. It is useful to
 	avoid losses due to congestion (when the bottleneck router supports

trunk/Documentation/sound/alsa/HD-Audio-Models.txt

@@ -296,6 +296,7 @@ Conexant 5066
 =============
   laptop	Basic Laptop config (default)
   hp-laptop	HP laptops, e g G60
+  asus		Asus K52JU, Lenovo G560
   dell-laptop	Dell laptops
   dell-vostro	Dell Vostro
   olpc-xo-1_5	OLPC XO 1.5

trunk/MAINTAINERS

@@ -5551,12 +5551,11 @@ S:	Supported
 F:	drivers/scsi/be2iscsi/
 
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-M:	Sathya Perla <sathyap@serverengines.com>
-M:	Subbu Seetharaman <subbus@serverengines.com>
-M:	Sarveshwar Bandi <sarveshwarb@serverengines.com>
-M:	Ajit Khaparde <ajitk@serverengines.com>
+M:	Sathya Perla <sathya.perla@emulex.com>
+M:	Subbu Seetharaman <subbu.seetharaman@emulex.com>
+M:	Ajit Khaparde <ajit.khaparde@emulex.com>
 L:	netdev@vger.kernel.org
-W:	http://www.serverengines.com
+W:	http://www.emulex.com
 S:	Supported
 F:	drivers/net/benet/
 
@@ -6787,12 +6786,12 @@ S:	Maintained
 F:	drivers/net/wireless/wl1251/*
 
 WL1271 WIRELESS DRIVER
-M:	Luciano Coelho <luciano.coelho@nokia.com>
+M:	Luciano Coelho <coelho@ti.com>
 L:	linux-wireless@vger.kernel.org
-W:	http://wireless.kernel.org
+W:	http://wireless.kernel.org/en/users/Drivers/wl12xx
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
 S:	Maintained
-F:	drivers/net/wireless/wl12xx/wl1271*
+F:	drivers/net/wireless/wl12xx/
 F:	include/linux/wl12xx.h
 
 WL3501 WIRELESS PCMCIA CARD DRIVER

trunk/arch/x86/include/asm/mmu_context.h

@@ -36,8 +36,6 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	unsigned cpu = smp_processor_id();
 
 	if (likely(prev != next)) {
-		/* stop flush ipis for the previous mm */
-		cpumask_clear_cpu(cpu, mm_cpumask(prev));
 #ifdef CONFIG_SMP
 		percpu_write(cpu_tlbstate.state, TLBSTATE_OK);
 		percpu_write(cpu_tlbstate.active_mm, next);
@@ -47,6 +45,9 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 		/* Re-load page tables */
 		load_cr3(next->pgd);
 
+		/* stop flush ipis for the previous mm */
+		cpumask_clear_cpu(cpu, mm_cpumask(prev));
+
 		/*
 		 * load the LDT, if the LDT is different:
 		 */

trunk/arch/x86/include/asm/smp.h

@@ -40,10 +40,7 @@ DECLARE_EARLY_PER_CPU(u16, x86_cpu_to_apicid);
 DECLARE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid);
 
 /* Static state in head.S used to set up a CPU */
-extern struct {
-	void *sp;
-	unsigned short ss;
-} stack_start;
+extern unsigned long stack_start; /* Initial stack pointer address */
 
 struct smp_ops {
 	void (*smp_prepare_boot_cpu)(void);

trunk/arch/x86/kernel/acpi/sleep.c

@@ -100,7 +100,7 @@ int acpi_save_state_mem(void)
 #else /* CONFIG_64BIT */
 	header->trampoline_segment = setup_trampoline() >> 4;
 #ifdef CONFIG_SMP
-	stack_start.sp = temp_stack + sizeof(temp_stack);
+	stack_start = (unsigned long)temp_stack + sizeof(temp_stack);
 	early_gdt_descr.address =
 			(unsigned long)get_cpu_gdt_table(smp_processor_id());
 	initial_gs = per_cpu_offset(smp_processor_id());

trunk/arch/x86/kernel/cpu/mtrr/main.c

@@ -793,13 +793,21 @@ void set_mtrr_aps_delayed_init(void)
 }
 
 /*
- * MTRR initialization for all AP's
+ * Delayed MTRR initialization for all AP's
  */
 void mtrr_aps_init(void)
 {
 	if (!use_intel())
 		return;
 
+	/*
+	 * Check if someone has requested the delay of AP MTRR initialization,
+	 * by doing set_mtrr_aps_delayed_init(), prior to this point. If not,
+	 * then we are done.
+	 */
+	if (!mtrr_aps_delayed_init)
+		return;
+
 	set_mtrr(~0U, 0, 0, 0);
 	mtrr_aps_delayed_init = false;
 }

trunk/arch/x86/kernel/head_32.S

@@ -85,6 +85,8 @@ RESERVE_BRK(pagetables, INIT_MAP_SIZE)
  */
 __HEAD
 ENTRY(startup_32)
+	movl pa(stack_start),%ecx
+
 	/* test KEEP_SEGMENTS flag to see if the bootloader is asking
 		us to not reload segments */
 	testb $(1<<6), BP_loadflags(%esi)
@@ -99,7 +101,9 @@ ENTRY(startup_32)
 	movl %eax,%es
 	movl %eax,%fs
 	movl %eax,%gs
+	movl %eax,%ss
 2:
+	leal -__PAGE_OFFSET(%ecx),%esp
 
 /*
  * Clear BSS first so that there are no surprises...
@@ -145,8 +149,6 @@ ENTRY(startup_32)
  * _brk_end is set up to point to the first "safe" location.
  * Mappings are created both at virtual address 0 (identity mapping)
  * and PAGE_OFFSET for up to _end.
- *
- * Note that the stack is not yet set up!
  */
 #ifdef CONFIG_X86_PAE
 
@@ -282,6 +284,9 @@ ENTRY(startup_32_smp)
 	movl %eax,%es
 	movl %eax,%fs
 	movl %eax,%gs
+	movl pa(stack_start),%ecx
+	movl %eax,%ss
+	leal -__PAGE_OFFSET(%ecx),%esp
 #endif /* CONFIG_SMP */
 default_entry:
 
@@ -347,8 +352,8 @@ default_entry:
 	movl %eax,%cr0		/* ..and set paging (PG) bit */
 	ljmp $__BOOT_CS,$1f	/* Clear prefetch and normalize %eip */
 1:
-	/* Set up the stack pointer */
-	lss stack_start,%esp
+	/* Shift the stack pointer to a virtual address */
+	addl $__PAGE_OFFSET, %esp
 
 /*
  * Initialize eflags.  Some BIOS's leave bits like NT set.  This would
@@ -360,9 +365,7 @@ default_entry:
 
 #ifdef CONFIG_SMP
 	cmpb $0, ready
-	jz  1f				/* Initial CPU cleans BSS */
-	jmp checkCPUtype
-1:
+	jnz checkCPUtype
 #endif /* CONFIG_SMP */
 
 /*
@@ -470,14 +473,7 @@ is386:	movl $2,%ecx		# set MP
 
 	cld			# gcc2 wants the direction flag cleared at all times
 	pushl $0		# fake return address for unwinder
-#ifdef CONFIG_SMP
-	movb ready, %cl
 	movb $1, ready
-	cmpb $0,%cl		# the first CPU calls start_kernel
-	je   1f
-	movl (stack_start), %esp
-1:
-#endif /* CONFIG_SMP */
 	jmp *(initial_code)
 
 /*
@@ -670,15 +666,15 @@ ENTRY(initial_page_table)
 #endif
 
 .data
+.balign 4
 ENTRY(stack_start)
 	.long init_thread_union+THREAD_SIZE
-	.long __BOOT_DS
-
-ready:	.byte 0
 
 early_recursion_flag:
 	.long 0
 
+ready:	.byte 0
+
 int_msg:
 	.asciz "Unknown interrupt or fault at: %p %p %p\n"
 

trunk/arch/x86/kernel/smpboot.c

@@ -638,7 +638,7 @@ wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
 	 * target processor state.
 	 */
 	startup_ipi_hook(phys_apicid, (unsigned long) start_secondary,
-			 (unsigned long)stack_start.sp);
+			 stack_start);
 
 	/*
 	 * Run STARTUP IPI loop.
@@ -785,7 +785,7 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu)
 #endif
 	early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu);
 	initial_code = (unsigned long)start_secondary;
-	stack_start.sp = (void *) c_idle.idle->thread.sp;
+	stack_start  = c_idle.idle->thread.sp;
 
 	/* start_ip had better be page-aligned! */
 	start_ip = setup_trampoline();

trunk/arch/x86/mm/pageattr.c

@@ -256,7 +256,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address,
 				   unsigned long pfn)
 {
 	pgprot_t forbidden = __pgprot(0);
-	pgprot_t required = __pgprot(0);
 
 	/*
 	 * The BIOS area between 640k and 1Mb needs to be executable for
@@ -282,12 +281,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address,
 	if (within(pfn, __pa((unsigned long)__start_rodata) >> PAGE_SHIFT,
 		   __pa((unsigned long)__end_rodata) >> PAGE_SHIFT))
 		pgprot_val(forbidden) |= _PAGE_RW;
-	/*
-	 * .data and .bss should always be writable.
-	 */
-	if (within(address, (unsigned long)_sdata, (unsigned long)_edata) ||
-	    within(address, (unsigned long)__bss_start, (unsigned long)__bss_stop))
-		pgprot_val(required) |= _PAGE_RW;
 
 #if defined(CONFIG_X86_64) && defined(CONFIG_DEBUG_RODATA)
 	/*
@@ -327,7 +320,6 @@ static inline pgprot_t static_protections(pgprot_t prot, unsigned long address,
 #endif
 
 	prot = __pgprot(pgprot_val(prot) & ~pgprot_val(forbidden));
-	prot = __pgprot(pgprot_val(prot) | pgprot_val(required));
 
 	return prot;
 }

trunk/drivers/char/agp/Kconfig

@@ -50,7 +50,7 @@ config AGP_ATI
 
 config AGP_AMD
 	tristate "AMD Irongate, 761, and 762 chipset support"
-	depends on AGP && (X86_32 || ALPHA)
+	depends on AGP && X86_32
 	help
 	  This option gives you AGP support for the GLX component of
 	  X on AMD Irongate, 761, and 762 chipsets.

trunk/drivers/char/agp/amd-k7-agp.c

@@ -41,22 +41,8 @@ static int amd_create_page_map(struct amd_page_map *page_map)
 	if (page_map->real == NULL)
 		return -ENOMEM;
 
-#ifndef CONFIG_X86
-	SetPageReserved(virt_to_page(page_map->real));
-	global_cache_flush();
-	page_map->remapped = ioremap_nocache(virt_to_phys(page_map->real),
-					    PAGE_SIZE);
-	if (page_map->remapped == NULL) {
-		ClearPageReserved(virt_to_page(page_map->real));
-		free_page((unsigned long) page_map->real);
-		page_map->real = NULL;
-		return -ENOMEM;
-	}
-	global_cache_flush();
-#else
 	set_memory_uc((unsigned long)page_map->real, 1);
 	page_map->remapped = page_map->real;
-#endif
 
 	for (i = 0; i < PAGE_SIZE / sizeof(unsigned long); i++) {
 		writel(agp_bridge->scratch_page, page_map->remapped+i);
@@ -68,12 +54,7 @@ static int amd_create_page_map(struct amd_page_map *page_map)
 
 static void amd_free_page_map(struct amd_page_map *page_map)
 {
-#ifndef CONFIG_X86
-	iounmap(page_map->remapped);
-	ClearPageReserved(virt_to_page(page_map->real));
-#else
 	set_memory_wb((unsigned long)page_map->real, 1);
-#endif
 	free_page((unsigned long) page_map->real);
 }
 

trunk/drivers/char/agp/intel-agp.c

@@ -773,21 +773,15 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 
 	dev_info(&pdev->dev, "Intel %s Chipset\n", intel_agp_chipsets[i].name);
 
-	/*
-	* If the device has not been properly setup, the following will catch
-	* the problem and should stop the system from crashing.
-	* 20030610 - hamish@zot.org
-	*/
-	if (pci_enable_device(pdev)) {
-		dev_err(&pdev->dev, "can't enable PCI device\n");
-		agp_put_bridge(bridge);
-		return -ENODEV;
-	}
-
 	/*
 	* The following fixes the case where the BIOS has "forgotten" to
 	* provide an address range for the GART.
 	* 20030610 - hamish@zot.org
+	* This happens before pci_enable_device() intentionally;
+	* calling pci_enable_device() before assigning the resource
+	* will result in the GART being disabled on machines with such
+	* BIOSs (the GART ends up with a BAR starting at 0, which
+	* conflicts a lot of other devices).
 	*/
 	r = &pdev->resource[0];
 	if (!r->start && r->end) {
@@ -798,6 +792,17 @@ static int __devinit agp_intel_probe(struct pci_dev *pdev,
 		}
 	}
 
+	/*
+	* If the device has not been properly setup, the following will catch
+	* the problem and should stop the system from crashing.
+	* 20030610 - hamish@zot.org
+	*/
+	if (pci_enable_device(pdev)) {
+		dev_err(&pdev->dev, "can't enable PCI device\n");
+		agp_put_bridge(bridge);
+		return -ENODEV;
+	}
+
 	/* Fill in the mode register */
 	if (cap_ptr) {
 		pci_read_config_dword(pdev,

trunk/drivers/gpu/drm/drm_crtc.c

@@ -2674,3 +2674,23 @@ int drm_mode_page_flip_ioctl(struct drm_device *dev,
 	mutex_unlock(&dev->mode_config.mutex);
 	return ret;
 }
+
+void drm_mode_config_reset(struct drm_device *dev)
+{
+	struct drm_crtc *crtc;
+	struct drm_encoder *encoder;
+	struct drm_connector *connector;
+
+	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head)
+		if (crtc->funcs->reset)
+			crtc->funcs->reset(crtc);
+
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
+		if (encoder->funcs->reset)
+			encoder->funcs->reset(encoder);
+
+	list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+		if (connector->funcs->reset)
+			connector->funcs->reset(connector);
+}
+EXPORT_SYMBOL(drm_mode_config_reset);