---

yaml
---
r: 2223
b: refs/heads/master
c: 19fa95e
h: refs/heads/master
i:
  2221: 2c0ee36
  2219: 49c384b
  2215: 836755f
  2207: c0ee931
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 0107b3cf3225aed6ddde4fa8dbcd4ed643b34f4d
+refs/heads/master: 19fa95e9e999ee2b0d7adfbd1a687b136afcd6f1

trunk/Documentation/DocBook/Makefile

@@ -8,7 +8,7 @@
 
 DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
 	    kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
-	    procfs-guide.xml writing_usb_driver.xml scsidrivers.xml \
+	    procfs-guide.xml writing_usb_driver.xml \
 	    sis900.xml kernel-api.xml journal-api.xml lsm.xml usb.xml \
 	    gadget.xml libata.xml mtdnand.xml librs.xml
 

trunk/Documentation/networking/generic-hdlc.txt

@@ -1,21 +1,21 @@
 Generic HDLC layer
 Krzysztof Halasa <khc@pm.waw.pl>
-January, 2003
 
 
 Generic HDLC layer currently supports:
-- Frame Relay (ANSI, CCITT and no LMI), with ARP support (no InARP).
-  Normal (routed) and Ethernet-bridged (Ethernet device emulation)
-  interfaces can share a single PVC.
-- raw HDLC - either IP (IPv4) interface or Ethernet device emulation.
-- Cisco HDLC,
-- PPP (uses syncppp.c),
-- X.25 (uses X.25 routines).
-
-There are hardware drivers for the following cards:
-- C101 by Moxa Technologies Co., Ltd.
-- RISCom/N2 by SDL Communications Inc.
-- and others, some not in the official kernel.
+1. Frame Relay (ANSI, CCITT, Cisco and no LMI).
+   - Normal (routed) and Ethernet-bridged (Ethernet device emulation)
+     interfaces can share a single PVC.
+   - ARP support (no InARP support in the kernel - there is an
+     experimental InARP user-space daemon available on:
+     http://www.kernel.org/pub/linux/utils/net/hdlc/).
+2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation.
+3. Cisco HDLC.
+4. PPP (uses syncppp.c).
+5. X.25 (uses X.25 routines).
+
+Generic HDLC is a protocol driver only - it needs a low-level driver
+for your particular hardware.
 
 Ethernet device emulation (using HDLC or Frame-Relay PVC) is compatible
 with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging).
@@ -24,7 +24,7 @@ with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging).
 Make sure the hdlc.o and the hardware driver are loaded. It should
 create a number of "hdlc" (hdlc0 etc) network devices, one for each
 WAN port. You'll need the "sethdlc" utility, get it from:
-	http://hq.pm.waw.pl/hdlc/
+	http://www.kernel.org/pub/linux/utils/net/hdlc/
 
 Compile sethdlc.c utility:
 	gcc -O2 -Wall -o sethdlc sethdlc.c
@@ -52,12 +52,12 @@ Setting interface:
 * v35 | rs232 | x21 | t1 | e1 - sets physical interface for a given port
                                 if the card has software-selectable interfaces
   loopback - activate hardware loopback (for testing only)
-* clock ext - external clock (uses DTE RX and TX clock)
-* clock int - internal clock (provides clock signal on DCE clock output)
-* clock txint - TX internal, RX external (provides TX clock on DCE output)
-* clock txfromrx - TX clock derived from RX clock (TX clock on DCE output)
-* rate - sets clock rate in bps (not required for external clock or
-                                 for txfromrx)
+* clock ext - both RX clock and TX clock external
+* clock int - both RX clock and TX clock internal
+* clock txint - RX clock external, TX clock internal
+* clock txfromrx - RX clock external, TX clock derived from RX clock
+* rate - sets clock rate in bps (for "int" or "txint" clock only)
+
 
 Setting protocol:
 
@@ -79,7 +79,7 @@ Setting protocol:
 * x25 - sets X.25 mode
 
 * fr - Frame Relay mode
-  lmi ansi / ccitt / none - LMI (link management) type
+  lmi ansi / ccitt / cisco / none - LMI (link management) type
   dce - Frame Relay DCE (network) side LMI instead of default DTE (user).
   It has nothing to do with clocks!
   t391 - link integrity verification polling timer (in seconds) - user
@@ -119,13 +119,14 @@ or
 
 
 
-If you have a problem with N2 or C101 card, you can issue the "private"
-command to see port's packet descriptor rings (in kernel logs):
+If you have a problem with N2, C101 or PLX200SYN card, you can issue the
+"private" command to see port's packet descriptor rings (in kernel logs):
 
 	sethdlc hdlc0 private
 
-The hardware driver has to be build with CONFIG_HDLC_DEBUG_RINGS.
+The hardware driver has to be build with #define DEBUG_RINGS.
 Attaching this info to bug reports would be helpful. Anyway, let me know
 if you have problems using this.
 
-For patches and other info look at http://hq.pm.waw.pl/hdlc/
+For patches and other info look at:
+<http://www.kernel.org/pub/linux/utils/net/hdlc/>.

trunk/Documentation/networking/multicast.txt

@@ -47,7 +47,6 @@ ni52		<------------------ Buggy ------------------>
 ni65		YES		YES		YES		Software(#)
 seeq		NO		NO		NO		N/A
 sgiseek		<------------------ Buggy ------------------>
-sk_g16		NO		NO		YES		N/A
 smc-ultra	YES		YES		YES		Hardware
 sunlance	YES		YES		YES		Hardware
 tulip		YES		YES		YES		Hardware

trunk/Documentation/networking/net-modules.txt

@@ -284,9 +284,6 @@ ppp.c:
 seeq8005.c: *Not modularized*
 	(Probes ports: 0x300, 0x320, 0x340, 0x360)
 
-sk_g16.c: *Not modularized*
-	(Probes ports: 0x100, 0x180, 0x208, 0x220m 0x288, 0x320, 0x328, 0x390)
-
 skeleton.c: *Skeleton*
 
 slhc.c:

trunk/Documentation/scsi/ChangeLog.megaraid

@@ -1,3 +1,69 @@
+Release Date	: Mon Mar 07 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
+Current Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
+Older Version	: 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
+
+1.	Added IOCTL backward compatibility.
+	Convert megaraid_mm driver to new compat_ioctl entry points.
+	I don't have easy access to hardware, so only compile tested.
+		- Signed-off-by:Andi Kleen <ak@muc.de>
+
+2.	megaraid_mbox fix: wrong order of arguments in memset()
+	That, BTW, shows why cross-builds are useful-the only indication of
+	problem had been a new warning showing up in sparse output on alpha
+	build (number of exceeding 256 got truncated).
+		- Signed-off-by: Al Viro
+		<viro@parcelfarce.linux.theplanet.co.uk>
+
+3.	Convert pci_module_init to pci_register_driver
+	Convert from pci_module_init to pci_register_driver
+	(from:http://kerneljanitors.org/TODO)
+		- Signed-off-by: Domen Puncer <domen@coderock.org>
+
+4.	Use the pre defined DMA mask constants from dma-mapping.h
+	Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling
+	pci_set_dma_mask() or pci_set_consistend_dma_mask(). See
+	http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for more
+	details.
+		Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
+		Signed-off-by: Domen Puncer <domen@coderock.org>
+
+5.	Remove SSID checking for Dobson, Lindsay, and Verde based products.
+	Checking the SSVID/SSID for controllers which have Dobson, Lindsay,
+	and Verde is unnecessary because device ID has been assigned by LSI
+	and it is unique value. So, all controllers with these IOPs have to be
+	supported by the driver regardless SSVID/SSID.
+
+6.	Date Thu, 27 Jan 2005 04:31:09 +0100 
+	From Herbert Poetzl <> 
+	Subject RFC: assert_spin_locked() for 2.6 
+
+	Greetings!
+
+	overcautious programming will kill your kernel ;)
+	ever thought about checking a spin_lock or even
+	asserting that it must be held (maybe just for
+	spinlock debugging?) ...
+
+	there are several checks present in the kernel
+	where somebody does a variation on the following:
+
+	  BUG_ON(!spin_is_locked(&some_lock));
+
+	so what's wrong about that? nothing, unless you
+	compile the code with CONFIG_DEBUG_SPINLOCK but 
+	without CONFIG_SMP ... in which case the BUG()
+	will kill your kernel ...
+
+	maybe it's not advised to make such assertions, 
+	but here is a solution which works for me ...
+	(compile tested for sh, x86_64 and x86, boot/run
+	tested for x86 only)
+
+	best,
+	Herbert
+
+		- Herbert Poetzl <herbert@13thfloor.at>, Thu, 27 Jan 2005
+
 Release Date	: Thu Feb 03 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
 Current Version	: 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
 Older Version	: 2.20.4.4 (scsi module), 2.20.2.4 (cmm module)