Merge branch 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/lin…

…ux/kernel/git/tip/linux-2.6-tip

* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
  ACPI, x86: expose some IO-APIC routines when CONFIG_ACPI=n
  x86, apic: Slim down stack usage in early_init_lapic_mapping()
  x86, ioapic: Get rid of needless check and simplify ioapic_setup_resources()
  x86, ioapic: Define IO_APIC_DEFAULT_PHYS_BASE constant
  x86: Fix x86_model test in es7000_apic_is_cluster()
  x86, apic: Move dmar_table_init() out of enable_IR()
  x86, ioapic: Panic on irq-pin binding only if needed
  x86/apic: Enable x2APIC without interrupt remapping under KVM
  x86, apic: Drop redundant bit assignment
  x86, ioapic: Throw BUG instead of NULL dereference
  x86, ioapic: Introduce for_each_irq_pin() helper
  x86: Remove superfluous NULL pointer check in destroy_irq()
  x86/ioapic.c: unify ioapic_retrigger_irq()
  x86/ioapic.c: convert __target_IO_APIC_irq to conventional for() loop
  x86/ioapic.c: clean up replace_pin_at_irq_node logic and comments
  x86/ioapic.c: convert replace_pin_at_irq_node to conventional for() loop
  x86/ioapic.c: simplify add_pin_to_irq_node()
  x86/ioapic.c: convert io_apic_level_ack_pending loop to normal for() loop
  x86/ioapic.c: move lost comment to what seems like appropriate place
  x86/ioapic.c: remove redundant declaration of irq_pin_list
  ...

arch/x86/include/asm/apic.h

@@ -183,6 +183,10 @@ static inline int x2apic_enabled(void)
 }
 
 #define x2apic_supported()	(cpu_has_x2apic)
+static inline void x2apic_force_phys(void)
+{
+	x2apic_phys = 1;
+}
 #else
 static inline void check_x2apic(void)
 {
@@ -194,6 +198,9 @@ static inline int x2apic_enabled(void)
 {
 	return 0;
 }
+static inline void x2apic_force_phys(void)
+{
+}
 
 #define	x2apic_preenabled 0
 #define	x2apic_supported()	0

arch/x86/include/asm/apicdef.h

@@ -8,7 +8,8 @@
  * Ingo Molnar <mingo@redhat.com>, 1999, 2000
  */
 
-#define	APIC_DEFAULT_PHYS_BASE	0xfee00000
+#define IO_APIC_DEFAULT_PHYS_BASE	0xfec00000
+#define	APIC_DEFAULT_PHYS_BASE		0xfee00000
 
 #define	APIC_ID		0x20
 

arch/x86/include/asm/io_apic.h

@@ -150,11 +150,10 @@ extern int timer_through_8259;
 #define io_apic_assign_pci_irqs \
 	(mp_irq_entries && !skip_ioapic_setup && io_apic_irqs)
 
-#ifdef CONFIG_ACPI
+extern u8 io_apic_unique_id(u8 id);
 extern int io_apic_get_unique_id(int ioapic, int apic_id);
 extern int io_apic_get_version(int ioapic);
 extern int io_apic_get_redir_entries(int ioapic);
-#endif /* CONFIG_ACPI */
 
 struct io_apic_irq_attr;
 extern int io_apic_set_pci_routing(struct device *dev, int irq,
@@ -177,6 +176,16 @@ extern int setup_ioapic_entry(int apic, int irq,
 			      int polarity, int vector, int pin);
 extern void ioapic_write_entry(int apic, int pin,
 			       struct IO_APIC_route_entry e);
+
+struct mp_ioapic_gsi{
+	int gsi_base;
+	int gsi_end;
+};
+extern struct mp_ioapic_gsi  mp_gsi_routing[];
+int mp_find_ioapic(int gsi);
+int mp_find_ioapic_pin(int ioapic, int gsi);
+void __init mp_register_ioapic(int id, u32 address, u32 gsi_base);
+
 #else  /* !CONFIG_X86_IO_APIC */
 #define io_apic_assign_pci_irqs 0
 static const int timer_through_8259 = 0;

arch/x86/kernel/acpi/boot.c

@@ -833,106 +833,6 @@ static int __init acpi_parse_madt_lapic_entries(void)
 extern int es7000_plat;
 #endif
 
-static struct {
-	int gsi_base;
-	int gsi_end;
-} mp_ioapic_routing[MAX_IO_APICS];
-
-int mp_find_ioapic(int gsi)
-{
-	int i = 0;
-
-	/* Find the IOAPIC that manages this GSI. */
-	for (i = 0; i < nr_ioapics; i++) {
-		if ((gsi >= mp_ioapic_routing[i].gsi_base)
-		    && (gsi <= mp_ioapic_routing[i].gsi_end))
-			return i;
-	}
-
-	printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
-	return -1;
-}
-
-int mp_find_ioapic_pin(int ioapic, int gsi)
-{
-	if (WARN_ON(ioapic == -1))
-		return -1;
-	if (WARN_ON(gsi > mp_ioapic_routing[ioapic].gsi_end))
-		return -1;
-
-	return gsi - mp_ioapic_routing[ioapic].gsi_base;
-}
-
-static u8 __init uniq_ioapic_id(u8 id)
-{
-#ifdef CONFIG_X86_32
-	if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
-	    !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
-		return io_apic_get_unique_id(nr_ioapics, id);
-	else
-		return id;
-#else
-	int i;
-	DECLARE_BITMAP(used, 256);
-	bitmap_zero(used, 256);
-	for (i = 0; i < nr_ioapics; i++) {
-		struct mpc_ioapic *ia = &mp_ioapics[i];
-		__set_bit(ia->apicid, used);
-	}
-	if (!test_bit(id, used))
-		return id;
-	return find_first_zero_bit(used, 256);
-#endif
-}
-
-static int bad_ioapic(unsigned long address)
-{
-	if (nr_ioapics >= MAX_IO_APICS) {
-		printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
-		       "(found %d)\n", MAX_IO_APICS, nr_ioapics);
-		panic("Recompile kernel with bigger MAX_IO_APICS!\n");
-	}
-	if (!address) {
-		printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
-		       " found in table, skipping!\n");
-		return 1;
-	}
-	return 0;
-}
-
-void __init mp_register_ioapic(int id, u32 address, u32 gsi_base)
-{
-	int idx = 0;
-
-	if (bad_ioapic(address))
-		return;
-
-	idx = nr_ioapics;
-
-	mp_ioapics[idx].type = MP_IOAPIC;
-	mp_ioapics[idx].flags = MPC_APIC_USABLE;
-	mp_ioapics[idx].apicaddr = address;
-
-	set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
-	mp_ioapics[idx].apicid = uniq_ioapic_id(id);
-	mp_ioapics[idx].apicver = io_apic_get_version(idx);
-
-	/*
-	 * Build basic GSI lookup table to facilitate gsi->io_apic lookups
-	 * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
-	 */
-	mp_ioapic_routing[idx].gsi_base = gsi_base;
-	mp_ioapic_routing[idx].gsi_end = gsi_base +
-	    io_apic_get_redir_entries(idx);
-
-	printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, "
-	       "GSI %d-%d\n", idx, mp_ioapics[idx].apicid,
-	       mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr,
-	       mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end);
-
-	nr_ioapics++;
-}
-
 int __init acpi_probe_gsi(void)
 {
 	int idx;
@@ -947,7 +847,7 @@ int __init acpi_probe_gsi(void)
 
 	max_gsi = 0;
 	for (idx = 0; idx < nr_ioapics; idx++) {
-		gsi = mp_ioapic_routing[idx].gsi_end;
+		gsi = mp_gsi_routing[idx].gsi_end;
 
 		if (gsi > max_gsi)
 			max_gsi = gsi;
@@ -1179,9 +1079,8 @@ static int __init acpi_parse_madt_ioapic_entries(void)
 	 * If MPS is present, it will handle them,
 	 * otherwise the system will stay in PIC mode
 	 */
-	if (acpi_disabled || acpi_noirq) {
+	if (acpi_disabled || acpi_noirq)
 		return -ENODEV;
-	}
 
 	if (!cpu_has_apic)
 		return -ENODEV;

arch/x86/kernel/apic/apic.c

@@ -49,6 +49,7 @@
 #include <asm/mtrr.h>
 #include <asm/smp.h>
 #include <asm/mce.h>
+#include <asm/kvm_para.h>
 
 unsigned int num_processors;
 
@@ -1361,94 +1362,106 @@ void enable_x2apic(void)
 }
 #endif /* CONFIG_X86_X2APIC */
 
-void __init enable_IR_x2apic(void)
+int __init enable_IR(void)
 {
 #ifdef CONFIG_INTR_REMAP
-	int ret;
-	unsigned long flags;
-	struct IO_APIC_route_entry **ioapic_entries = NULL;
-
-	ret = dmar_table_init();
-	if (ret) {
-		pr_debug("dmar_table_init() failed with %d:\n", ret);
-		goto ir_failed;
-	}
-
 	if (!intr_remapping_supported()) {
 		pr_debug("intr-remapping not supported\n");
-		goto ir_failed;
+		return 0;
 	}
 
-
 	if (!x2apic_preenabled && skip_ioapic_setup) {
 		pr_info("Skipped enabling intr-remap because of skipping "
 			"io-apic setup\n");
-		return;
+		return 0;
 	}
 
+	if (enable_intr_remapping(x2apic_supported()))
+		return 0;
+
+	pr_info("Enabled Interrupt-remapping\n");
+
+	return 1;
+
+#endif
+	return 0;
+}
+
+void __init enable_IR_x2apic(void)
+{
+	unsigned long flags;
+	struct IO_APIC_route_entry **ioapic_entries = NULL;
+	int ret, x2apic_enabled = 0;
+	int dmar_table_init_ret = 0;
+
+#ifdef CONFIG_INTR_REMAP
+	dmar_table_init_ret = dmar_table_init();
+	if (dmar_table_init_ret)
+		pr_debug("dmar_table_init() failed with %d:\n",
+				dmar_table_init_ret);
+#endif
+
 	ioapic_entries = alloc_ioapic_entries();
 	if (!ioapic_entries) {
-		pr_info("Allocate ioapic_entries failed: %d\n", ret);
-		goto end;
+		pr_err("Allocate ioapic_entries failed\n");
+		goto out;
 	}
 
 	ret = save_IO_APIC_setup(ioapic_entries);
 	if (ret) {
 		pr_info("Saving IO-APIC state failed: %d\n", ret);
-		goto end;
+		goto out;
 	}
 
 	local_irq_save(flags);
-	mask_IO_APIC_setup(ioapic_entries);
 	mask_8259A();
+	mask_IO_APIC_setup(ioapic_entries);
 
-	ret = enable_intr_remapping(x2apic_supported());
-	if (ret)
-		goto end_restore;
+	if (dmar_table_init_ret)
+		ret = 0;
+	else
+		ret = enable_IR();
 
-	pr_info("Enabled Interrupt-remapping\n");
+	if (!ret) {
+		/* IR is required if there is APIC ID > 255 even when running
+		 * under KVM
+		 */
+		if (max_physical_apicid > 255 || !kvm_para_available())
+			goto nox2apic;
+		/*
+		 * without IR all CPUs can be addressed by IOAPIC/MSI
+		 * only in physical mode
+		 */
+		x2apic_force_phys();
+	}
+
+	x2apic_enabled = 1;
 
 	if (x2apic_supported() && !x2apic_mode) {
 		x2apic_mode = 1;
 		enable_x2apic();
 		pr_info("Enabled x2apic\n");
 	}
 
-end_restore:
-	if (ret)
-		/*
-		 * IR enabling failed
-		 */
+nox2apic:
+	if (!ret) /* IR enabling failed */
 		restore_IO_APIC_setup(ioapic_entries);
-
 	unmask_8259A();
 	local_irq_restore(flags);
 
-end:
+out:
 	if (ioapic_entries)
 		free_ioapic_entries(ioapic_entries);
 
-	if (!ret)
+	if (x2apic_enabled)
 		return;
 
-ir_failed:
 	if (x2apic_preenabled)
-		panic("x2apic enabled by bios. But IR enabling failed");
+		panic("x2apic: enabled by BIOS but kernel init failed.");
 	else if (cpu_has_x2apic)
-		pr_info("Not enabling x2apic,Intr-remapping\n");
-#else
-	if (!cpu_has_x2apic)
-		return;
-
-	if (x2apic_preenabled)
-		panic("x2apic enabled prior OS handover,"
-		      " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP");
-#endif
-
-	return;
+		pr_info("Not enabling x2apic, Intr-remapping init failed.\n");
 }
 
-
 #ifdef CONFIG_X86_64
 /*
  * Detect and enable local APICs on non-SMP boards.
@@ -1549,20 +1562,16 @@ static int __init detect_init_APIC(void)
 #ifdef CONFIG_X86_64
 void __init early_init_lapic_mapping(void)
 {
-	unsigned long phys_addr;
-
 	/*
 	 * If no local APIC can be found then go out
 	 * : it means there is no mpatable and MADT
 	 */
 	if (!smp_found_config)
 		return;
 
-	phys_addr = mp_lapic_addr;
-
-	set_fixmap_nocache(FIX_APIC_BASE, phys_addr);
+	set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
 	apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
-		    APIC_BASE, phys_addr);
+		    APIC_BASE, mp_lapic_addr);
 
 	/*
 	 * Fetch the APIC ID of the BSP in case we have a
@@ -1651,7 +1660,6 @@ int __init APIC_init_uniprocessor(void)
 	    APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) {
 		pr_err("BIOS bug, local APIC 0x%x not detected!...\n",
 			boot_cpu_physical_apicid);
-		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_APIC);
 		return -1;
 	}
 #endif

arch/x86/kernel/apic/es7000_32.c

@@ -167,7 +167,7 @@ static int es7000_apic_is_cluster(void)
 {
 	/* MPENTIUMIII */
 	if (boot_cpu_data.x86 == 6 &&
-	    (boot_cpu_data.x86_model >= 7 || boot_cpu_data.x86_model <= 11))
+	    (boot_cpu_data.x86_model >= 7 && boot_cpu_data.x86_model <= 11))
 		return 1;
 
 	return 0;