autofs.conf.default.in

#
# Define default options for autofs.
#
[ autofs ]
#
# master_map_name - default map name for the master map.
#
#master_map_name = auto.master
#
# timeout - set the default mount timeout in secons. The internal
#	    program default is 10 minutes, but the default installed
#	    configuration overrides this and sets the timeout to 5
#	    minutes to be consistent with earlier autofs releases.
#
timeout = 300
#
# master_wait - set the default maximum time to wait for the
# 		master map to become available if it cannot
# 		be read at program start (default 10, wait
# 		for 10 seconds then continue).
#
# master_wait = 10
#
# negative_timeout - set the default negative timeout for
# 		     failed mount attempts (default 60).
#
#negative_timeout = 60
# mariux:
negative_timeout = 1
#
# mount_wait - time to wait for a response from mount(8).
# 	       Setting this timeout can cause problems when
# 	       mount would otherwise wait for a server that
# 	       is temporarily unavailable, such as when it's
# 	       restarting. The default setting (-1) of waiting
# 	       for mount(8) usually results in a wait of around
# 	       3 minutes.
#
#mount_wait = -1
#
# umount_wait - time to wait for a response from umount(8).
#
#umount_wait = 12
#
# browse_mode - maps are browsable by default.
#
browse_mode = no
#
# mount_nfs_default_protocol - specify the default protocol used by
# 			       mount.nfs(8). Since we can't identify
# 			       the default automatically we need to
# 			       set it in our configuration.
#
#mount_nfs_default_protocol = 3
#
# append_options - append to global options instead of replace.
#
#append_options = yes
#
# logging - set default log level "none", "verbose" or "debug"
#
#logging = none
#
# force_standard_program_map_env - disable the use of the "AUTOFS_"
#			prefix for standard environemt variables when
#			executing a program map. Since program maps
#			are run as the privileded user this opens
#			automount(8) to potential user privilege
#			escalation when the program map is written
#			in a language that  can load components from,
#			for example, a user home directory.
#
# force_standard_program_map_env = no
#
# use_mount_request_log_id - Set whether to use a mount request log
#			id so that log entries for specific mount
#			requests can be easily identified in logs
#			that have multiple conncurrent requests.
#
#use_mount_request_log_id = no
#
# Define base dn for map dn lookup.
#
# Define server URIs
#
# ldap_uri - space seperated list of server uris of the form
# 	     <proto>://<server>[/] where <proto> can be ldap
# 	     or ldaps. The option can be given multiple times.
# 	     Map entries that include a server name override
# 	     this option.
#
#	     This configuration option can also be used to
#	     request autofs lookup SRV RRs for a domain of
#	     the form <proto>:///[<domain dn>]. Note that a
#	     trailing "/" is not allowed when using this form.
#	     If the domain dn is not specified the dns domain
#	     name (if any) is used to construct the domain dn
#	     for the SRV RR lookup. The server list returned
#	     from an SRV RR lookup is refreshed according to
#	     the minimum ttl found in the SRV RR records or
#	     after one hour, whichever is less.
#
#ldap_uri = ""
#
# ldap_timeout - timeout value for the synchronous API  calls
#		  (default is LDAP library default).
#
#ldap_timeout = -1
#
# ldap_network_timeout - set the network response timeout (default 8).
#
#ldap_network_timeout = 8
#
# search_base - base dn to use for searching for map search dn.
# 		Multiple entries can be given and they are checked
# 		in the order they occur here.
#
#search_base = ""
#
# Define the LDAP schema to used for lookups
#
# If no schema is set autofs will check each of the schemas
# below in the order given to try and locate an appropriate
# basdn for lookups. If you want to minimize the number of
# queries to the server set the values here.
#
#map_object_class = nisMap
#entry_object_class = nisObject
#map_attribute = nisMapName
#entry_attribute = cn
#value_attribute= nisMapEntry
#
# Other common LDAP naming
#
#map_object_class = automountMap
#entry_object_class = automount
#map_attribute = ou
#entry_attribute = cn
#value_attribute= automountInformation
#
#map_object_class = automountMap
#entry_object_class = automount
#map_attribute = automountMapName
#entry_attribute = automountKey
#value_attribute= automountInformation
#
# auth_conf_file - set the default location for the SASL
#		   authentication configuration file.
#
#auth_conf_file = @@autofsmapdir@@/autofs_ldap_auth.conf
#
# map_hash_table_size - set the map cache hash table size.
# 			Should be a power of 2 with a ratio of
# 			close to 1:8 for acceptable performance
# 			with maps up to around 8000 entries.
# 			See autofs.conf(5) for more details.
#
#map_hash_table_size = 1024
#
# use_hostname_for_mounts - nfs mounts where the host name resolves
# 			to more than one IP address normally need
# 			to use the IP address to esure a mount to
# 			a host that isn't responding isn't done.
# 			If that behaviour is not wanted then set
#			ths to "yes", default is "no".
#
#use_hostname_for_mounts = "no"
#
# disable_not_found_message - The original request to add this log message
# 			 needed it to be unconditional. That produces, IMHO,
# 			 unnecessary noise in the log so a configuration option
# 			 has been added to provide the ability to turn it off.
# 			 The default is "no" to maintain the current behaviour.
#
#disable_not_found_message = "no"
#
# sss_master_map_wait - When sssd is starting up it can sometimes return
#			"no such entry" for a short time until it has read
# 			in the LDAP map information. Internal default is 0
# 			seconds, don't wait but if there is a problem with
# 			autofs not finding the master map at startup (when
# 			it should) then try setting this to 10 to work
# 			around it.
#
#sss_master_map_wait = 0
#
# Otions for the amd parser within autofs.
#
# amd configuration options that are aren't used, haven't been
# implemented or have different behaviour within autofs.
#
# A number of the amd configuration options are not used by autofs,
# some because they are not relevant within autofs, some because
# they are done differently in autofs and others that are not yet
# implemented.
#
# Since "mount_type" is always autofs (because there's no user space
# NFS server) the configuration entries relating to that aren't used.
# Also, server availability is done differently within autofs so the
# options that relate to the amd server monitoring sub-system are
# also not used.
#
# These options are mount_type, auto_attrcache, portmap_program,
# nfs_vers_ping, nfs_allow_any_interface, nfs_allow_insecure_port,
# nfs_proto, nfs_retransmit_counter, nfs_retransmit_counter_udp,
# nfs_retransmit_counter_tcp, nfs_retransmit_counter_toplvl,
# nfs_retry_interval, nfs_retry_interval_udp, nfs_retry_interval_tcp,
# nfs_retry_interval_toplvl and nfs_vers.
#
#
# Other options that are not used within the autofs implementation:
#
# log_file, truncate_log - autofs used either stderr when running in
#	the foreground or sends its output to syslog so an alternate
#	log file (or truncating the log) can't be used.
#
# print_pid - there's no corresponding option for this within autofs.
#
# use_tcpwrappers, show_statfs_entries - there's no user space NFS
#	server to control access to so this option isn't relevant.
#	The show_statfs_entries can't be implemented for the same
#	reason.
#
# debug_mtab_file - there's no user space NFS server and autofs
#	avoids using file based mtab whenever possible.
#
# sun_map_syntax - obviously, are provided by autofs itself.
#
# plock, show_statfs_entries, preferred_amq_port - not supported.
#
# ldap_cache_maxmem, ldap_cache_seconds - external ldap caching
#	is not used by autofs.
#
# ldap_proto_version - autofs always attempts to use the highest
#	available ldap protocol version.
#
# cache_duration, map_reload_interval, map_options - the map
#	entry cache is continually updated and stale entries
#	cleaned on re-load, which is done when map changes are
#	detected so these configuration entries are not used
#	by autofs.
#
# localhost_address - is not used within autofs. This
#	configuration option was only used in the amd user
#	space server code and is not relevant within autofs.
#
#
# Options that are handled differently within autofs:
#
# pid_file - must be given as a command line option on startup.
#
# print_version - program version and feature information is obtained
#	by using the automount command line option "-V".
#
# debug_options, log_options - autofs has somewhat more limited
#	logging and debug logging options. When the log_options
#	options is encountered it is converted to the nearest
#	matching autofs logging option. Since the configuration
#	option debug_options would be handled the same way it
#	is ignored.
#
# restart_mounts - has no sensible meaning within autofs because autofs
#	always tries to re-connect to existing mounts. While this
#	has its own set of problems not re-connecting to existing
#	mounts always results in a non-functional automount tree if
#	mounts were busy at the last shutdown (as is also the case
#	with amd when using mount_type autofs).
#
# forced_unmounts - detaching mounts often causes serious problems
#	for users of existing mounts. It is used by autofs in some
#	cases, either at the explicit request of the user (with a
#	command line or init option) and in some special cases during
#	program operation but is avoided whenever possible.
#
#
# A number of configuration options are not yet implemented:
#
# fully_qualified_hosts - not yet implemented.
#
# unmount_on_exit - since autofs always tries to re-connect
#	to mounts left mounted from a previous shutdown this
#	is a sensible option to implement and that will be
#	done.
#
# exec_map_timeout - a timeout is not currently used for
#	for program maps, might be implemented.
#
# tag - the tag option is not implemented within autofs.
#
#
# Supported options:
#
# arch, karch, os, osver - these options default to what is returned
#	from uname(2) and can be overridden if required.
#
# full_os - has no default and must be set in the configuration
#	if used in maps.
#
# cluster - if not set defaults to the host domain name. This option
#	corresponds to the HP_UX cluster name (according to the amd
#	source) and is probably not used in Linux but is set anyway.
#
# vendor - has a default value of "unknown", it must be set in the
#	configuration if used in maps.
#
# auto_dir - is the base name of the mount tree used for external
#	mounts that are sometimes needed by amd maps. Its default
#	value is "/a".
#
# map_type - specifies the autofs map source, such as file, nis,
#	ldap etc. and has no default value set.
#
# map_defaults - is used to override /defaults entries within maps
#	and can be used to provide different defaults on specific
#	machines without having to modify centrally managed maps.
#	It is empty by default.
#
# search_path - colon seperated paths to search for maps that
#	are not specified as a full path.
#
# dismount_interval - is equivalent to the autofs timeout option. It
#	is only possible to use this with type "auto" mounts due
#	to the way the autofs kernel module performs expiry. It
#	takes its default value from the autofs internal default
#	of 600 seconds.
#
# browsable_dirs - make map keys visible in directory listings.
#	Note that support for the "fullybrowsable" option cannot
#	be added using the existing kernel to user space autofs
#	implementation.
#
# autofs_use_lofs - if set to "yes" autofs will attempt to use bind
#	mounts for type "auto" when possible.
#
# nis_domain - allows setting of a domain name other than the system
#	default.
#
# local_domain - is used to override (or set) the host domain name.
#
# normalize_hostnames - if set to "yes" then the contents of ${rhost}
#	is translated in its official host name.
#
# domain_strip - if set to "yes" the domain name part of the host
# 	is strippped when normalizing hostnames. This can be useful
#	when using of the same maps in a multiple domain environment.
#
# normalize_slashes - is set to "yes" by default and will collapse
#	multiple unescaped occurrences of "/" to a single "/".
#
# selectors_in_defaults, selectors_on_default - has a default value
#	of "no". If set to "yes" then any defaults entry will be
#	checked for selectors to determine the values to be used.
#	selectors_in_defaults is the preferred option to use.
#
# ldap_base - has no default value. It must be set to the base dn
#	that is used for queries if ldap is to be used as a map
#	source.
#
# ldap_hostports - has no default value set. It must be set to
#	the URI of the LDAP server to be used for lookups when
#	ldap is used a map source. It may contain a comma or
#	space seperated list of LDAP URIs.
#
# hesiod_base - the base name used for hesiod map sources.
#
# Additional configuration options added:
#
# linux_ufs_mount_type - set the default system filesystem type that's
#	used for mount type ufs. There's no simple way to determine
#	what the system default filesystem is and am-utils needs to
#	be continually updated to do this and can easily get it wrong
#	anyway.
#
#
# Define global options for the amd parser within autofs.
#
[ amd ]
#
# Override the internal default with the same timeout that
# is used by the override in the autofs configuration, sanity
# only change.
#
dismount_interval = 300
#
# map_type = file
#
# Overriding this can cause autofs to use less resources because
# it will use symlinks instead of bind mounts in certain cases.
# You should ensure that the autofs kernel module your using
# supports expration of symlinks for best results (although this
# appears to work reasonably well most of the time without the
# update).
#
# autofs_use_lofs = yes
#
# Several configuration options can be set per mount point.
# In particulr map_type, map_name, map_defaults, search_path,
# browsable_dirs, dismount_interval and selectors_in_defaults
# (not all of which are currently implemented, see above).
#
# Also, if a section for an amd mount point is defined here
# it isn't necessary to specify the format in the corresponding
# master map entry and the format will be inherited for type
# "auto" mounts.
#
# [ /expamle/mount ]
# dismount_interval = 60
# map_type = nis