Merge pull request #1184 from mariux64/update-gtkmm-and-friends-for-i…

…nkscape

Update gtkmm and friends for Inkscape

atkmm.be0

@@ -0,0 +1,79 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION atkmm-2.28.0-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://ftp.gnome.org/pub/gnome/sources/atkmm/${PKGVERSION[2]}/atkmm-${PKGVERSION}.tar.xz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##

cairomm.be0

@@ -0,0 +1,79 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION cairomm-1.12.2-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://cairographics.org/releases/cairomm-${PKGVERSION}.tar.gz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##

glib2.be0

@@ -1,15 +1,13 @@
 #!/usr/bin/env beesh
 
-# BEE_VERSION glib2-2.58.1-0
+# BEE_VERSION glib2-2.60.5-0
 
 SRCURL[0]="https://ftp.acc.umu.se/pub/gnome/sources/glib/${PKGVERSION[2]}/glib-${PKGVERSION}.tar.xz"
 
 # PATCHURL+=()
 
 # BEE_CONFIGURE=compat
 
-BEE_BUILDTYPE=meson
-
 # EXCLUDE=""
 
 # build_in_sourcedir
@@ -31,7 +29,7 @@ mee_configure() {
 # with xattr enabled it tries to copy things like system.nfs4_acl which fails
 
     bee_configure \
-        -Dselinux=false \
+        -Dselinux=disabled \
         -Dxattr=false
 }
 

glibmm.be0

@@ -0,0 +1,79 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION glibmm-2.60.0-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://ftp.gnome.org/pub/GNOME/sources/glibmm/${PKGVERSION[2]}/glibmm-${PKGVERSION}.tar.xz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##