Update to GTK+ 3.22.26 and glib mesalib

colord.be0

@@ -0,0 +1,91 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION colord-1.3.5-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://www.freedesktop.org/software/colord/releases/colord-${PKGVERSION}.tar.xz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Add filename patterns to the EXCLUDE array of files that should not
+## be added to you package but may be present in the image directory.
+
+# EXCLUDE+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+mee_configure() {
+    bee_configure \
+        --disable-argyllcms-sensor \
+        --disable-gusb \
+        --disable-static \
+        --disable-systemd-login \
+        --disable-udev \
+        --with-daemon-user=colord
+}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##

glib2-2.44.1-0.bee → glib2.be0

@@ -1,8 +1,10 @@
 #!/usr/bin/env beesh
 
+# BEE_VERSION glib2-2.54.2-0
+
 SRCURL[0]="http://ftp.acc.umu.se/pub/gnome/sources/glib/${PKGVERSION[2]}/glib-${PKGVERSION}.tar.xz"
 
-PATCHURL+=(/src/mariux/download/mariux64-glib-2.44.0-0001-g_get_current_dir-use-get_current_dir_name-if-_GNU_S.patch)
+# PATCHURL+=()
 
 # BEE_CONFIGURE=compat
 

gtk3.be0

@@ -0,0 +1,89 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION gtk3-3.22.26-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://ftp.gnome.org/pub/gnome/sources/gtk+/${PKGVERSION[2]}/gtk+-${PKGVERSION}.tar.xz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Add filename patterns to the EXCLUDE array of files that should not
+## be added to you package but may be present in the image directory.
+
+# EXCLUDE+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+mee_configure() {
+    bee_configure \
+        --enable-introspection \
+        --enable-wayland-backend \
+        --enable-xinerama \
+        --enable-x11-backend
+}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##

libxkbcommon.be0

@@ -0,0 +1,85 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION libxkbcommon-0.7.2-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://xkbcommon.org/download/libxkbcommon-${PKGVERSION}.tar.xz"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Add filename patterns to the EXCLUDE array of files that should not
+## be added to you package but may be present in the image directory.
+
+# EXCLUDE+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##

mesalib.be0

@@ -1,6 +1,6 @@
 #!/usr/bin/env beesh
 
-# BEE_VERSION mesalib-17.2.4-0
+# BEE_VERSION mesalib-17.2.6-0
 
 ## this file was created by bee init and should be executed to build a
 ## bee-package. (Additional hints are located at the end of this file.)
@@ -61,8 +61,7 @@ mee_configure() {
         --enable-osmesa \
         --enable-xa \
         --enable-glx-tls \
-        --with-llvm-shared-libs \
-        --with--platforms="drm,x11" \
+        --with-platforms="drm,x11,wayland" \
         --with-gallium-drivers="nouveau,r600,radeonsi,svga,swrast" \
         --with-vulkan-drivers="intel,radeon"
 }