Update nfs utils

iana-etc-2.30-0.be0

@@ -0,0 +1,98 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION iana-etc-2.30-1
+
+PREFIX=
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="http://sethwklein.net/iana-etc-${PKGVERSION}.tar.bz2"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+mee_build() {
+    bee_build
+
+    sed -i \
+       -e '/ 111\/tcp/d' \
+       -e '/ 111\/udp/d' \
+       -e '/ 2000\/tcp/d' \
+       -e '/ 2003\/tcp/d' \
+       -e '/ 4201\/udp/d' \
+       services
+
+    echo "# mariux changes..." >>services
+    echo "# don't add lines here .. add changes to ${PF}.bee and reinstall.." >>services
+    echo "sunrpc         111/tcp portmapper rpcbind" >>services
+    echo "sunrpc         111/udp portmapper rpcbind" >>services
+    echo "sieve         2000/tcp" >>services
+    echo "lmtp          2003/tcp" >>services
+    echo "fud           4201/udp" >>services
+
+}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##

libnfsidmap-0.25-0.bee → keyutils.be0

@@ -1,13 +1,15 @@
 #!/usr/bin/env beesh
 
+# BEE_VERSION keyutils-1.5.11-0
+
 ## this file was created by bee init and should be executed to build a
 ## bee-package. (Additional hints are located at the end of this file.)
 
 ###############################################################################
 ## The source URL(s) define the location of the sources that will be
 ## downloaded. Version variables may be used to simplify reuse of this bee-file.
 
-SRCURL[0]="http://www.citi.umich.edu/projects/nfsv4/linux/libnfsidmap/libnfsidmap-${PKGVERSION}.tar.gz"
+SRCURL[0]="https://people.redhat.com/~dhowells/keyutils/keyutils-${PKGVERSION}.tar.bz2"
 
 ###############################################################################
 ## Add URLs/pathes to patch files to the PATCHURL array.
@@ -16,14 +18,8 @@ SRCURL[0]="http://www.citi.umich.edu/projects/nfsv4/linux/libnfsidmap/libnfsidma
 # PATCHURL+=()
 
 ###############################################################################
-## Add filename patterns to the EXCLUDE array of files that should not
-## be added to you package but may be present in the image directory.
-
-# EXCLUDE+=()
-
-###############################################################################
-## Uncomment the next statement, if the software may not be able to be build
-## outside the source directory and need to be build inside the source
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
 ## directory.
 
 # build_in_sourcedir
@@ -52,7 +48,7 @@ SRCURL[0]="http://www.citi.umich.edu/projects/nfsv4/linux/libnfsidmap/libnfsidma
 #}
 
 #mee_configure() {
-#    bee_configure 
+#    bee_configure
 #}
 
 #mee_build() {
@@ -71,7 +67,7 @@ SRCURL[0]="http://www.citi.umich.edu/projects/nfsv4/linux/libnfsidmap/libnfsidma
 ## The name of this bee-file should follow the following naming convention:
 ##     pkgname-pkgversion-pkgrevision.bee
 ##
-## You may remove all comments as long as SRCURL[0]="" is set.
+## You may remove all comments as long as SRCURL[0] is set.
 ##
 ## Everything in this file will be executed in a bash environment.
 ##

libtirpc.be0

@@ -0,0 +1,79 @@
+#!/usr/bin/env beesh
+
+# BEE_VERSION libtirpc-1.1.4-0
+
+## this file was created by bee init and should be executed to build a
+## bee-package. (Additional hints are located at the end of this file.)
+
+###############################################################################
+## The source URL(s) define the location of the sources that will be
+## downloaded. Version variables may be used to simplify reuse of this bee-file.
+
+SRCURL[0]="https://sourceforge.net/projects/libtirpc/files/libtirpc/${PKGVERSION}/libtirpc-${PKGVERSION}.tar.bz2/download"
+
+###############################################################################
+## Add URLs/pathes to patch files to the PATCHURL array.
+## The sources will be patched in the order of the array.
+
+# PATCHURL+=()
+
+###############################################################################
+## Uncomment the next statement, if the software may not be able to be built
+## outside the source directory and needs to be built inside the source
+## directory.
+
+# build_in_sourcedir
+
+###############################################################################
+## bee cannot detect buildtypes specified in subdirectories.
+## Sometimes packages "hide" the real sources in a subdirectory named
+## 'src' or 'cmake' or ..
+## use 'sourcesubdir_append' to specify this directory if known.
+
+# sourcesubdir_append src
+
+
+###############################################################################
+## Change the default (auto-detected) steps to
+## extract, patch, configure/setup, build and install the software.
+## Make sure the mee_install function does install everything to the
+## image directory "${D}"
+
+#mee_extract() {
+#    bee_extract "${@}"
+#}
+
+#mee_patch() {
+#    bee_patch "${@}"
+#}
+
+#mee_configure() {
+#    bee_configure
+#}
+
+#mee_build() {
+#    bee_build
+#}
+
+#mee_install() {
+#    bee_install
+#}
+## by default this may be 'make install DESTDIR="${D}"'
+
+###############################################################################
+##
+## Additional hints:
+##
+## The name of this bee-file should follow the following naming convention:
+##     pkgname-pkgversion-pkgrevision.bee
+##
+## You may remove all comments as long as SRCURL[0] is set.
+##
+## Everything in this file will be executed in a bash environment.
+##
+## Build the package by executing
+##     './pkg-version-N.bee' or
+##     'beesh ./pkg-version-N.bee'
+##
+## see http://beezinga.org/
+##