Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel…

…/git/s390/linux

Pull s390 updates from Martin Schwidefsky:
 "There are a couple of new things for s390 with this merge request:

   - a new scheduling domain "drawer" is added to reflect the unusual
     topology found on z13 machines.  Performance tests showed up to 8
     percent gain with the additional domain.

   - the new crc-32 checksum crypto module uses the vector-galois-field
     multiply and sum SIMD instruction to speed up crc-32 and crc-32c.

   - proper __ro_after_init support, this requires RO_AFTER_INIT_DATA in
     the generic vmlinux.lds linker script definitions.

   - kcov instrumentation support.  A prerequisite for that is the
     inline assembly basic block cleanup, which is the reason for the
     net/iucv/iucv.c change.

   - support for 2GB pages is added to the hugetlbfs backend.

  Then there are two removals:

   - the oprofile hardware sampling support is dead code and is removed.
     The oprofile user space uses the perf interface nowadays.

   - the ETR clock synchronization is removed, this has been superseeded
     be the STP clock synchronization.  And it always has been
     "interesting" code..

  And the usual bug fixes and cleanups"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (82 commits)
  s390/pci: Delete an unnecessary check before the function call "pci_dev_put"
  s390/smp: clean up a condition
  s390/cio/chp : Remove deprecated create_singlethread_workqueue
  s390/chsc: improve channel path descriptor determination
  s390/chsc: sanitize fmt check for chp_desc determination
  s390/cio: make fmt1 channel path descriptor optional
  s390/chsc: fix ioctl CHSC_INFO_CU command
  s390/cio/device_ops: fix kernel doc
  s390/cio: allow to reset channel measurement block
  s390/console: Make preferred console handling more consistent
  s390/mm: fix gmap tlb flush issues
  s390/mm: add support for 2GB hugepages
  s390: have unique symbol for __switch_to address
  s390/cpuinfo: show maximum thread id
  s390/ptrace: clarify bits in the per_struct
  s390: stack address vs thread_info
  s390: remove pointless load within __switch_to
  s390: enable kcov support
  s390/cpumf: use basic block for ecctr inline assembly
  s390/hypfs: use basic block for diag inline assembly
  ...

Documentation/cputopology.txt

@@ -20,48 +20,70 @@ to /proc/cpuinfo output of some architectures:
 	identifier (rather than the kernel's).	The actual value is
 	architecture and platform dependent.
 
-4) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
+4) /sys/devices/system/cpu/cpuX/topology/drawer_id:
+
+	the drawer ID of cpuX. Typically it is the hardware platform's
+	identifier (rather than the kernel's).	The actual value is
+	architecture and platform dependent.
+
+5) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
 
 	internal kernel map of cpuX's hardware threads within the same
 	core as cpuX.
 
-5) /sys/devices/system/cpu/cpuX/topology/thread_siblings_list:
+6) /sys/devices/system/cpu/cpuX/topology/thread_siblings_list:
 
 	human-readable list of cpuX's hardware threads within the same
 	core as cpuX.
 
-6) /sys/devices/system/cpu/cpuX/topology/core_siblings:
+7) /sys/devices/system/cpu/cpuX/topology/core_siblings:
 
 	internal kernel map of cpuX's hardware threads within the same
 	physical_package_id.
 
-7) /sys/devices/system/cpu/cpuX/topology/core_siblings_list:
+8) /sys/devices/system/cpu/cpuX/topology/core_siblings_list:
 
 	human-readable list of cpuX's hardware threads within the same
 	physical_package_id.
 
-8) /sys/devices/system/cpu/cpuX/topology/book_siblings:
+9) /sys/devices/system/cpu/cpuX/topology/book_siblings:
 
 	internal kernel map of cpuX's hardware threads within the same
 	book_id.
 
-9) /sys/devices/system/cpu/cpuX/topology/book_siblings_list:
+10) /sys/devices/system/cpu/cpuX/topology/book_siblings_list:
 
 	human-readable list of cpuX's hardware threads within the same
 	book_id.
 
+11) /sys/devices/system/cpu/cpuX/topology/drawer_siblings:
+
+	internal kernel map of cpuX's hardware threads within the same
+	drawer_id.
+
+12) /sys/devices/system/cpu/cpuX/topology/drawer_siblings_list:
+
+	human-readable list of cpuX's hardware threads within the same
+	drawer_id.
+
 To implement it in an architecture-neutral way, a new source file,
-drivers/base/topology.c, is to export the 6 or 9 attributes. The three book
-related sysfs files will only be created if CONFIG_SCHED_BOOK is selected.
+drivers/base/topology.c, is to export the 6 to 12 attributes. The book
+and drawer related sysfs files will only be created if CONFIG_SCHED_BOOK
+and CONFIG_SCHED_DRAWER are selected.
+
+CONFIG_SCHED_BOOK and CONFIG_DRAWER are currently only used on s390, where
+they reflect the cpu and cache hierarchy.
 
 For an architecture to support this feature, it must define some of
 these macros in include/asm-XXX/topology.h:
 #define topology_physical_package_id(cpu)
 #define topology_core_id(cpu)
 #define topology_book_id(cpu)
+#define topology_drawer_id(cpu)
 #define topology_sibling_cpumask(cpu)
 #define topology_core_cpumask(cpu)
 #define topology_book_cpumask(cpu)
+#define topology_drawer_cpumask(cpu)
 
 The type of **_id macros is int.
 The type of **_cpumask macros is (const) struct cpumask *. The latter
@@ -78,6 +100,8 @@ not defined by include/asm-XXX/topology.h:
 
 For architectures that don't support books (CONFIG_SCHED_BOOK) there are no
 default definitions for topology_book_id() and topology_book_cpumask().
+For architectures that don't support drawes (CONFIG_SCHED_DRAWER) there are
+no default definitions for topology_drawer_id() and topology_drawer_cpumask().
 
 Additionally, CPU topology information is provided under
 /sys/devices/system/cpu and includes these files.  The internal

Documentation/kernel-parameters.txt

@@ -2794,8 +2794,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			timer: [X86] Force use of architectural NMI
 				timer mode (see also oprofile.timer
 				for generic hr timer mode)
-				[s390] Force legacy basic mode sampling
-                                (report cpu_type "timer")
 
 	oops=panic	Always panic on oopses. Default is to just kill the
 			process, but there is a small probability of

Documentation/s390/s390dbf.txt

@@ -405,7 +405,7 @@ Example:
 
 > ls /sys/kernel/debug/s390dbf/dasd
 flush  hex_ascii  level pages raw
-> cat /sys/kernel/debug/s390dbf/dasd/hex_ascii | sort +1
+> cat /sys/kernel/debug/s390dbf/dasd/hex_ascii | sort -k2,2 -s
 00 00974733272:680099 2 - 02 0006ad7e  07 ea 4a 90 | ....
 00 00974733272:682210 2 - 02 0006ade6  46 52 45 45 | FREE
 00 00974733272:682213 2 - 02 0006adf6  07 ea 4a 90 | ....

arch/s390/Kconfig

@@ -72,6 +72,7 @@ config S390
 	select ARCH_HAS_DEVMEM_IS_ALLOWED
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_GCOV_PROFILE_ALL
+	select ARCH_HAS_KCOV
 	select ARCH_HAS_SG_CHAIN
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_INLINE_READ_LOCK
@@ -163,6 +164,7 @@ config S390
 	select NO_BOOTMEM
 	select OLD_SIGACTION
 	select OLD_SIGSUSPEND3
+	select SPARSE_IRQ
 	select SYSCTL_EXCEPTION_TRACE
 	select TTY
 	select VIRT_CPU_ACCOUNTING
@@ -477,13 +479,17 @@ config SCHED_MC
 config SCHED_BOOK
 	def_bool n
 
+config SCHED_DRAWER
+	def_bool n
+
 config SCHED_TOPOLOGY
 	def_bool y
 	prompt "Topology scheduler support"
 	depends on SMP
 	select SCHED_SMT
 	select SCHED_MC
 	select SCHED_BOOK
+	select SCHED_DRAWER
 	help
 	  Topology scheduler support improves the CPU scheduler's decision
 	  making when dealing with machines that have multi-threading,
@@ -605,16 +611,6 @@ config PCI_NR_FUNCTIONS
 	  This allows you to specify the maximum number of PCI functions which
 	  this kernel will support.
 
-config PCI_NR_MSI
-	int "Maximum number of MSI interrupts (64-32768)"
-	range 64 32768
-	default "256"
-	help
-	  This defines the number of virtual interrupts the kernel will
-	  provide for MSI interrupts. If you configure your system to have
-	  too few drivers will fail to allocate MSI interrupts for all
-	  PCI devices.
-
 source "drivers/pci/Kconfig"
 
 endif	# PCI

arch/s390/boot/compressed/Makefile

@@ -4,6 +4,8 @@
 # create a compressed vmlinux image from the original vmlinux
 #
 
+KCOV_INSTRUMENT := n
+
 targets	:= vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2
 targets += vmlinux.bin.xz vmlinux.bin.lzma vmlinux.bin.lzo vmlinux.bin.lz4
 targets += misc.o piggy.o sizes.h head.o

arch/s390/configs/default_defconfig

@@ -678,6 +678,7 @@ CONFIG_CRYPTO_SHA512_S390=m
 CONFIG_CRYPTO_DES_S390=m
 CONFIG_CRYPTO_AES_S390=m
 CONFIG_CRYPTO_GHASH_S390=m
+CONFIG_CRYPTO_CRC32_S390=m
 CONFIG_ASYMMETRIC_KEY_TYPE=y
 CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
 CONFIG_X509_CERTIFICATE_PARSER=m

arch/s390/configs/gcov_defconfig

@@ -616,6 +616,7 @@ CONFIG_CRYPTO_SHA512_S390=m
 CONFIG_CRYPTO_DES_S390=m
 CONFIG_CRYPTO_AES_S390=m
 CONFIG_CRYPTO_GHASH_S390=m
+CONFIG_CRYPTO_CRC32_S390=m
 CONFIG_ASYMMETRIC_KEY_TYPE=y
 CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
 CONFIG_X509_CERTIFICATE_PARSER=m

arch/s390/configs/performance_defconfig

@@ -615,6 +615,7 @@ CONFIG_CRYPTO_SHA512_S390=m
 CONFIG_CRYPTO_DES_S390=m
 CONFIG_CRYPTO_AES_S390=m
 CONFIG_CRYPTO_GHASH_S390=m
+CONFIG_CRYPTO_CRC32_S390=m
 CONFIG_ASYMMETRIC_KEY_TYPE=y
 CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m
 CONFIG_X509_CERTIFICATE_PARSER=m

arch/s390/crypto/Makefile

@@ -9,3 +9,6 @@ obj-$(CONFIG_CRYPTO_DES_S390) += des_s390.o
 obj-$(CONFIG_CRYPTO_AES_S390) += aes_s390.o
 obj-$(CONFIG_S390_PRNG) += prng.o
 obj-$(CONFIG_CRYPTO_GHASH_S390) += ghash_s390.o
+obj-$(CONFIG_CRYPTO_CRC32_S390) += crc32-vx_s390.o
+
+crc32-vx_s390-y := crc32-vx.o crc32le-vx.o crc32be-vx.o