Merge tag 'fixes-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/…

…kernel/git/balbi/usb into usb-linus

Felipe writes:

USB: fixes for v5.2-rc4

DWC2 gets a fix for zlp handling which allows DWC2 to pass USBCV MSC
tests.

A memory leak in fusb300 was plugged.

DWC2 also got a fix for wMaxPacketSize handling while acting as host
which fixes a regression with USB Cameras.

Apart from these, the usual set of minor fixes.

Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>

* tag 'fixes-for-v5.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
  usb: gadget: udc: lpc32xx: fix return value check in lpc32xx_udc_probe()
  usb: gadget: dwc2: fix zlp handling
  usb: dwc2: Set actual frame number for completed ISOC transfer for none DDMA
  usb: gadget: udc: lpc32xx: allocate descriptor with GFP_ATOMIC
  usb: gadget: fusb300_udc: Fix memory leak of fusb300->ep[i]
  usb: phy: mxs: Disable external charger detect in mxs_phy_hw_init()
  usb: dwc2: Fix DMA cache alignment issues
  usb: dwc2: host: Fix wMaxPacketSize handling (fix webcam regression)

drivers/usb/dwc2/gadget.c

@@ -835,19 +835,22 @@ static void dwc2_gadget_fill_nonisoc_xfer_ddma_one(struct dwc2_hsotg_ep *hs_ep,
  * with corresponding information based on transfer data.
  */
 static void dwc2_gadget_config_nonisoc_xfer_ddma(struct dwc2_hsotg_ep *hs_ep,
-						 struct usb_request *ureq,
-						 unsigned int offset,
+						 dma_addr_t dma_buff,
 						 unsigned int len)
 {
+	struct usb_request *ureq = NULL;
 	struct dwc2_dma_desc *desc = hs_ep->desc_list;
 	struct scatterlist *sg;
 	int i;
 	u8 desc_count = 0;
 
+	if (hs_ep->req)
+		ureq = &hs_ep->req->req;
+
 	/* non-DMA sg buffer */
-	if (!ureq->num_sgs) {
+	if (!ureq || !ureq->num_sgs) {
 		dwc2_gadget_fill_nonisoc_xfer_ddma_one(hs_ep, &desc,
-			ureq->dma + offset, len, true);
+			dma_buff, len, true);
 		return;
 	}
 
@@ -1135,7 +1138,7 @@ static void dwc2_hsotg_start_req(struct dwc2_hsotg *hsotg,
 			offset = ureq->actual;
 
 		/* Fill DDMA chain entries */
-		dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, ureq, offset,
+		dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, ureq->dma + offset,
 						     length);
 
 		/* write descriptor chain address to control register */
@@ -2037,12 +2040,13 @@ static void dwc2_hsotg_program_zlp(struct dwc2_hsotg *hsotg,
 		dev_dbg(hsotg->dev, "Receiving zero-length packet on ep%d\n",
 			index);
 	if (using_desc_dma(hsotg)) {
+		/* Not specific buffer needed for ep0 ZLP */
+		dma_addr_t dma = hs_ep->desc_list_dma;
+
 		if (!index)
 			dwc2_gadget_set_ep0_desc_chain(hsotg, hs_ep);
 
-		/* Not specific buffer needed for ep0 ZLP */
-		dwc2_gadget_fill_nonisoc_xfer_ddma_one(hs_ep, &hs_ep->desc_list,
-			hs_ep->desc_list_dma, 0, true);
+		dwc2_gadget_config_nonisoc_xfer_ddma(hs_ep, dma, 0);
 	} else {
 		dwc2_writel(hsotg, DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) |
 			    DXEPTSIZ_XFERSIZE(0),
@@ -2417,6 +2421,10 @@ static void dwc2_hsotg_handle_outdone(struct dwc2_hsotg *hsotg, int epnum)
 			dwc2_gadget_incr_frame_num(hs_ep);
 	}
 
+	/* Set actual frame number for completed transfers */
+	if (!using_desc_dma(hsotg) && hs_ep->isochronous)
+		req->frame_number = hsotg->frame_number;
+
 	dwc2_hsotg_complete_request(hsotg, hs_ep, hs_req, result);
 }
 

drivers/usb/dwc2/hcd.c

@@ -2480,8 +2480,10 @@ static void dwc2_free_dma_aligned_buffer(struct urb *urb)
 		return;
 
 	/* Restore urb->transfer_buffer from the end of the allocated area */
-	memcpy(&stored_xfer_buffer, urb->transfer_buffer +
-	       urb->transfer_buffer_length, sizeof(urb->transfer_buffer));
+	memcpy(&stored_xfer_buffer,
+	       PTR_ALIGN(urb->transfer_buffer + urb->transfer_buffer_length,
+			 dma_get_cache_alignment()),
+	       sizeof(urb->transfer_buffer));
 
 	if (usb_urb_dir_in(urb)) {
 		if (usb_pipeisoc(urb->pipe))
@@ -2513,6 +2515,7 @@ static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
 	 * DMA
 	 */
 	kmalloc_size = urb->transfer_buffer_length +
+		(dma_get_cache_alignment() - 1) +
 		sizeof(urb->transfer_buffer);
 
 	kmalloc_ptr = kmalloc(kmalloc_size, mem_flags);
@@ -2523,7 +2526,8 @@ static int dwc2_alloc_dma_aligned_buffer(struct urb *urb, gfp_t mem_flags)
 	 * Position value of original urb->transfer_buffer pointer to the end
 	 * of allocation for later referencing
 	 */
-	memcpy(kmalloc_ptr + urb->transfer_buffer_length,
+	memcpy(PTR_ALIGN(kmalloc_ptr + urb->transfer_buffer_length,
+			 dma_get_cache_alignment()),
 	       &urb->transfer_buffer, sizeof(urb->transfer_buffer));
 
 	if (usb_urb_dir_out(urb))
@@ -2608,7 +2612,7 @@ static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 	chan->dev_addr = dwc2_hcd_get_dev_addr(&urb->pipe_info);
 	chan->ep_num = dwc2_hcd_get_ep_num(&urb->pipe_info);
 	chan->speed = qh->dev_speed;
-	chan->max_packet = dwc2_max_packet(qh->maxp);
+	chan->max_packet = qh->maxp;
 
 	chan->xfer_started = 0;
 	chan->halt_status = DWC2_HC_XFER_NO_HALT_STATUS;
@@ -2686,7 +2690,7 @@ static int dwc2_assign_and_init_hc(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh)
 		 * This value may be modified when the transfer is started
 		 * to reflect the actual transfer length
 		 */
-		chan->multi_count = dwc2_hb_mult(qh->maxp);
+		chan->multi_count = qh->maxp_mult;
 
 	if (hsotg->params.dma_desc_enable) {
 		chan->desc_list_addr = qh->desc_list_dma;
@@ -3806,19 +3810,21 @@ static struct dwc2_hcd_urb *dwc2_hcd_urb_alloc(struct dwc2_hsotg *hsotg,
 
 static void dwc2_hcd_urb_set_pipeinfo(struct dwc2_hsotg *hsotg,
 				      struct dwc2_hcd_urb *urb, u8 dev_addr,
-				      u8 ep_num, u8 ep_type, u8 ep_dir, u16 mps)
+				      u8 ep_num, u8 ep_type, u8 ep_dir,
+				      u16 maxp, u16 maxp_mult)
 {
 	if (dbg_perio() ||
 	    ep_type == USB_ENDPOINT_XFER_BULK ||
 	    ep_type == USB_ENDPOINT_XFER_CONTROL)
 		dev_vdbg(hsotg->dev,
-			 "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, mps=%d\n",
-			 dev_addr, ep_num, ep_dir, ep_type, mps);
+			 "addr=%d, ep_num=%d, ep_dir=%1x, ep_type=%1x, maxp=%d (%d mult)\n",
+			 dev_addr, ep_num, ep_dir, ep_type, maxp, maxp_mult);
 	urb->pipe_info.dev_addr = dev_addr;
 	urb->pipe_info.ep_num = ep_num;
 	urb->pipe_info.pipe_type = ep_type;
 	urb->pipe_info.pipe_dir = ep_dir;
-	urb->pipe_info.mps = mps;
+	urb->pipe_info.maxp = maxp;
+	urb->pipe_info.maxp_mult = maxp_mult;
 }
 
 /*
@@ -3909,8 +3915,9 @@ void dwc2_hcd_dump_state(struct dwc2_hsotg *hsotg)
 					dwc2_hcd_is_pipe_in(&urb->pipe_info) ?
 					"IN" : "OUT");
 				dev_dbg(hsotg->dev,
-					"      Max packet size: %d\n",
-					dwc2_hcd_get_mps(&urb->pipe_info));
+					"      Max packet size: %d (%d mult)\n",
+					dwc2_hcd_get_maxp(&urb->pipe_info),
+					dwc2_hcd_get_maxp_mult(&urb->pipe_info));
 				dev_dbg(hsotg->dev,
 					"      transfer_buffer: %p\n",
 					urb->buf);
@@ -4510,8 +4517,10 @@ static void dwc2_dump_urb_info(struct usb_hcd *hcd, struct urb *urb,
 	}
 
 	dev_vdbg(hsotg->dev, "  Speed: %s\n", speed);
-	dev_vdbg(hsotg->dev, "  Max packet size: %d\n",
-		 usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
+	dev_vdbg(hsotg->dev, "  Max packet size: %d (%d mult)\n",
+		 usb_endpoint_maxp(&urb->ep->desc),
+		 usb_endpoint_maxp_mult(&urb->ep->desc));
+
 	dev_vdbg(hsotg->dev, "  Data buffer length: %d\n",
 		 urb->transfer_buffer_length);
 	dev_vdbg(hsotg->dev, "  Transfer buffer: %p, Transfer DMA: %08lx\n",
@@ -4594,8 +4603,8 @@ static int _dwc2_hcd_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
 	dwc2_hcd_urb_set_pipeinfo(hsotg, dwc2_urb, usb_pipedevice(urb->pipe),
 				  usb_pipeendpoint(urb->pipe), ep_type,
 				  usb_pipein(urb->pipe),
-				  usb_maxpacket(urb->dev, urb->pipe,
-						!(usb_pipein(urb->pipe))));
+				  usb_endpoint_maxp(&ep->desc),
+				  usb_endpoint_maxp_mult(&ep->desc));
 
 	buf = urb->transfer_buffer;
 

drivers/usb/dwc2/hcd.h

@@ -171,7 +171,8 @@ struct dwc2_hcd_pipe_info {
 	u8 ep_num;
 	u8 pipe_type;
 	u8 pipe_dir;
-	u16 mps;
+	u16 maxp;
+	u16 maxp_mult;
 };
 
 struct dwc2_hcd_iso_packet_desc {
@@ -264,6 +265,7 @@ struct dwc2_hs_transfer_time {
  *                       - USB_ENDPOINT_XFER_ISOC
  * @ep_is_in:           Endpoint direction
  * @maxp:               Value from wMaxPacketSize field of Endpoint Descriptor
+ * @maxp_mult:          Multiplier for maxp
  * @dev_speed:          Device speed. One of the following values:
  *                       - USB_SPEED_LOW
  *                       - USB_SPEED_FULL
@@ -340,6 +342,7 @@ struct dwc2_qh {
 	u8 ep_type;
 	u8 ep_is_in;
 	u16 maxp;
+	u16 maxp_mult;
 	u8 dev_speed;
 	u8 data_toggle;
 	u8 ping_state;
@@ -503,9 +506,14 @@ static inline u8 dwc2_hcd_get_pipe_type(struct dwc2_hcd_pipe_info *pipe)
 	return pipe->pipe_type;
 }
 
-static inline u16 dwc2_hcd_get_mps(struct dwc2_hcd_pipe_info *pipe)
+static inline u16 dwc2_hcd_get_maxp(struct dwc2_hcd_pipe_info *pipe)
+{
+	return pipe->maxp;
+}
+
+static inline u16 dwc2_hcd_get_maxp_mult(struct dwc2_hcd_pipe_info *pipe)
 {
-	return pipe->mps;
+	return pipe->maxp_mult;
 }
 
 static inline u8 dwc2_hcd_get_dev_addr(struct dwc2_hcd_pipe_info *pipe)
@@ -620,12 +628,6 @@ static inline bool dbg_urb(struct urb *urb)
 static inline bool dbg_perio(void) { return false; }
 #endif
 
-/* High bandwidth multiplier as encoded in highspeed endpoint descriptors */
-#define dwc2_hb_mult(wmaxpacketsize) (1 + (((wmaxpacketsize) >> 11) & 0x03))
-
-/* Packet size for any kind of endpoint descriptor */
-#define dwc2_max_packet(wmaxpacketsize) ((wmaxpacketsize) & 0x07ff)
-
 /*
  * Returns true if frame1 index is greater than frame2 index. The comparison
  * is done modulo FRLISTEN_64_SIZE. This accounts for the rollover of the

drivers/usb/dwc2/hcd_intr.c

@@ -1617,8 +1617,9 @@ static void dwc2_hc_ahberr_intr(struct dwc2_hsotg *hsotg,
 
 	dev_err(hsotg->dev, "  Speed: %s\n", speed);
 
-	dev_err(hsotg->dev, "  Max packet size: %d\n",
-		dwc2_hcd_get_mps(&urb->pipe_info));
+	dev_err(hsotg->dev, "  Max packet size: %d (mult %d)\n",
+		dwc2_hcd_get_maxp(&urb->pipe_info),
+		dwc2_hcd_get_maxp_mult(&urb->pipe_info));
 	dev_err(hsotg->dev, "  Data buffer length: %d\n", urb->length);
 	dev_err(hsotg->dev, "  Transfer buffer: %p, Transfer DMA: %08lx\n",
 		urb->buf, (unsigned long)urb->dma);

drivers/usb/dwc2/hcd_queue.c

@@ -708,7 +708,7 @@ static void dwc2_hs_pmap_unschedule(struct dwc2_hsotg *hsotg,
 static int dwc2_uframe_schedule_split(struct dwc2_hsotg *hsotg,
 				      struct dwc2_qh *qh)
 {
-	int bytecount = dwc2_hb_mult(qh->maxp) * dwc2_max_packet(qh->maxp);
+	int bytecount = qh->maxp_mult * qh->maxp;
 	int ls_search_slice;
 	int err = 0;
 	int host_interval_in_sched;
@@ -1332,7 +1332,7 @@ static int dwc2_check_max_xfer_size(struct dwc2_hsotg *hsotg,
 	u32 max_channel_xfer_size;
 	int status = 0;
 
-	max_xfer_size = dwc2_max_packet(qh->maxp) * dwc2_hb_mult(qh->maxp);
+	max_xfer_size = qh->maxp * qh->maxp_mult;
 	max_channel_xfer_size = hsotg->params.max_transfer_size;
 
 	if (max_xfer_size > max_channel_xfer_size) {
@@ -1517,8 +1517,9 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
 	u32 prtspd = (hprt & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
 	bool do_split = (prtspd == HPRT0_SPD_HIGH_SPEED &&
 			 dev_speed != USB_SPEED_HIGH);
-	int maxp = dwc2_hcd_get_mps(&urb->pipe_info);
-	int bytecount = dwc2_hb_mult(maxp) * dwc2_max_packet(maxp);
+	int maxp = dwc2_hcd_get_maxp(&urb->pipe_info);
+	int maxp_mult = dwc2_hcd_get_maxp_mult(&urb->pipe_info);
+	int bytecount = maxp_mult * maxp;
 	char *speed, *type;
 
 	/* Initialize QH */
@@ -1531,6 +1532,7 @@ static void dwc2_qh_init(struct dwc2_hsotg *hsotg, struct dwc2_qh *qh,
 
 	qh->data_toggle = DWC2_HC_PID_DATA0;
 	qh->maxp = maxp;
+	qh->maxp_mult = maxp_mult;
 	INIT_LIST_HEAD(&qh->qtd_list);
 	INIT_LIST_HEAD(&qh->qh_list_entry);
 

drivers/usb/gadget/udc/fusb300_udc.c

@@ -1342,12 +1342,15 @@ static const struct usb_gadget_ops fusb300_gadget_ops = {
 static int fusb300_remove(struct platform_device *pdev)
 {
 	struct fusb300 *fusb300 = platform_get_drvdata(pdev);
+	int i;
 
 	usb_del_gadget_udc(&fusb300->gadget);
 	iounmap(fusb300->reg);
 	free_irq(platform_get_irq(pdev, 0), fusb300);
 
 	fusb300_free_request(&fusb300->ep[0]->ep, fusb300->ep0_req);
+	for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+		kfree(fusb300->ep[i]);
 	kfree(fusb300);
 
 	return 0;
@@ -1491,6 +1494,8 @@ static int fusb300_probe(struct platform_device *pdev)
 		if (fusb300->ep0_req)
 			fusb300_free_request(&fusb300->ep[0]->ep,
 				fusb300->ep0_req);
+		for (i = 0; i < FUSB300_MAX_NUM_EP; i++)
+			kfree(fusb300->ep[i]);
 		kfree(fusb300);
 	}
 	if (reg)

drivers/usb/gadget/udc/lpc32xx_udc.c

@@ -937,8 +937,7 @@ static struct lpc32xx_usbd_dd_gad *udc_dd_alloc(struct lpc32xx_udc *udc)
 	dma_addr_t			dma;
 	struct lpc32xx_usbd_dd_gad	*dd;
 
-	dd = (struct lpc32xx_usbd_dd_gad *) dma_pool_alloc(
-			udc->dd_cache, (GFP_KERNEL | GFP_DMA), &dma);
+	dd = dma_pool_alloc(udc->dd_cache, GFP_ATOMIC | GFP_DMA, &dma);
 	if (dd)
 		dd->this_dma = dma;
 
@@ -3070,9 +3069,9 @@ static int lpc32xx_udc_probe(struct platform_device *pdev)
 	}
 
 	udc->udp_baseaddr = devm_ioremap_resource(dev, res);
-	if (!udc->udp_baseaddr) {
+	if (IS_ERR(udc->udp_baseaddr)) {
 		dev_err(udc->dev, "IO map failure\n");
-		return -ENOMEM;
+		return PTR_ERR(udc->udp_baseaddr);
 	}
 
 	/* Get USB device clock */

drivers/usb/phy/phy-mxs-usb.c

@@ -63,6 +63,7 @@
 
 #define ANADIG_USB1_CHRG_DETECT_SET		0x1b4
 #define ANADIG_USB1_CHRG_DETECT_CLR		0x1b8
+#define ANADIG_USB2_CHRG_DETECT_SET		0x214
 #define ANADIG_USB1_CHRG_DETECT_EN_B		BIT(20)
 #define ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B	BIT(19)
 #define ANADIG_USB1_CHRG_DETECT_CHK_CONTACT	BIT(18)
@@ -250,6 +251,19 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
 	if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
 		writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
 
+	if (mxs_phy->regmap_anatop) {
+		unsigned int reg = mxs_phy->port_id ?
+			ANADIG_USB1_CHRG_DETECT_SET :
+			ANADIG_USB2_CHRG_DETECT_SET;
+		/*
+		 * The external charger detector needs to be disabled,
+		 * or the signal at DP will be poor
+		 */
+		regmap_write(mxs_phy->regmap_anatop, reg,
+			     ANADIG_USB1_CHRG_DETECT_EN_B |
+			     ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
+	}
+
 	mxs_phy_tx_init(mxs_phy);
 
 	return 0;