i40e: Add FW check to disable DCB and wrap autoneg workaround with FW…

… check

For FW < 4.33 DCB should be disabled.
Also Autoneg workaround to avoid Rx stall is still needed for FW < 4.33.

Change-ID: Iff36ad86be2f597e7701096014d6d094332a9a21
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/i40e/i40e_main.c

@@ -4551,6 +4551,11 @@ static int i40e_init_pf_dcb(struct i40e_pf *pf)
 	struct i40e_hw *hw = &pf->hw;
 	int err = 0;
 
+	/* Do not enable DCB for SW1 and SW2 images even if the FW is capable */
+	if (((pf->hw.aq.fw_maj_ver == 4) && (pf->hw.aq.fw_min_ver < 33)) ||
+	    (pf->hw.aq.fw_maj_ver < 4))
+		goto out;
+
 	/* Get the initial DCB configuration */
 	err = i40e_init_dcb(hw);
 	if (!err) {
@@ -6311,13 +6316,14 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit)
 		}
 	}
 
-	msleep(75);
-	ret = i40e_aq_set_link_restart_an(&pf->hw, true, NULL);
-	if (ret) {
-		dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n",
-			 pf->hw.aq.asq_last_status);
+	if (((pf->hw.aq.fw_maj_ver == 4) && (pf->hw.aq.fw_min_ver < 33)) ||
+	    (pf->hw.aq.fw_maj_ver < 4)) {
+		msleep(75);
+		ret = i40e_aq_set_link_restart_an(&pf->hw, true, NULL);
+		if (ret)
+			dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n",
+				 pf->hw.aq.asq_last_status);
 	}
-
 	/* reinit the misc interrupt */
 	if (pf->flags & I40E_FLAG_MSIX_ENABLED)
 		ret = i40e_setup_misc_vector(pf);
@@ -9677,13 +9683,14 @@ static int i40e_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (err)
 		dev_info(&pf->pdev->dev, "set phy mask fail, aq_err %d\n", err);
 
-	msleep(75);
-	err = i40e_aq_set_link_restart_an(&pf->hw, true, NULL);
-	if (err) {
-		dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n",
-			 pf->hw.aq.asq_last_status);
+	if (((pf->hw.aq.fw_maj_ver == 4) && (pf->hw.aq.fw_min_ver < 33)) ||
+	    (pf->hw.aq.fw_maj_ver < 4)) {
+		msleep(75);
+		err = i40e_aq_set_link_restart_an(&pf->hw, true, NULL);
+		if (err)
+			dev_info(&pf->pdev->dev, "link restart failed, aq_err=%d\n",
+				 pf->hw.aq.asq_last_status);
 	}
-
 	/* The main driver is (mostly) up and happy. We need to set this state
 	 * before setting up the misc vector or we get a race and the vector
 	 * ends up disabled forever.