Merge back thermal control material for v6.1.

Documentation/atomic_bitops.txt

@@ -59,7 +59,7 @@ Like with atomic_t, the rule of thumb is:
  - RMW operations that have a return value are fully ordered.
 
  - RMW operations that are conditional are unordered on FAILURE,
-   otherwise the above rules apply. In the case of test_and_{}_bit() operations,
+   otherwise the above rules apply. In the case of test_and_set_bit_lock(),
    if the bit in memory is unchanged by the operation then it is deemed to have
    failed.
 

Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml

@@ -233,6 +233,7 @@ allOf:
               - allwinner,sun8i-a83t-tcon-lcd
               - allwinner,sun8i-v3s-tcon
               - allwinner,sun9i-a80-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       properties:
@@ -252,6 +253,7 @@ allOf:
               - allwinner,sun8i-a83t-tcon-tv
               - allwinner,sun8i-r40-tcon-tv
               - allwinner,sun9i-a80-tcon-tv
+              - allwinner,sun20i-d1-tcon-tv
 
     then:
       properties:
@@ -278,6 +280,7 @@ allOf:
               - allwinner,sun9i-a80-tcon-lcd
               - allwinner,sun4i-a10-tcon
               - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       required:
@@ -294,6 +297,7 @@ allOf:
               - allwinner,sun8i-a23-tcon
               - allwinner,sun8i-a33-tcon
               - allwinner,sun8i-a83t-tcon-lcd
+              - allwinner,sun20i-d1-tcon-lcd
 
     then:
       properties:

Documentation/devicetree/bindings/net/qcom-emac.txt

@@ -14,7 +14,7 @@ MAC node:
 - mac-address : The 6-byte MAC address. If present, it is the default
 	MAC address.
 - internal-phy : phandle to the internal PHY node
-- phy-handle : phandle the external PHY node
+- phy-handle : phandle to the external PHY node
 
 Internal PHY node:
 - compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii".

Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml

@@ -47,12 +47,6 @@ properties:
         description:
           Properties for single LDO regulator.
 
-        properties:
-          regulator-name:
-            pattern: "^LDO[1-5]$"
-            description:
-              should be "LDO1", ..., "LDO5"
-
         unevaluatedProperties: false
 
       "^BUCK[1-6]$":
@@ -62,11 +56,6 @@ properties:
           Properties for single BUCK regulator.
 
         properties:
-          regulator-name:
-            pattern: "^BUCK[1-6]$"
-            description:
-              should be "BUCK1", ..., "BUCK6"
-
           nxp,dvs-run-voltage:
             $ref: "/schemas/types.yaml#/definitions/uint32"
             minimum: 600000

Documentation/devicetree/bindings/spi/cdns,qspi-nor-peripheral-props.yaml

@@ -10,7 +10,7 @@ description:
   See spi-peripheral-props.yaml for more info.
 
 maintainers:
-  - Pratyush Yadav <p.yadav@ti.com>
+  - Vaishnav Achath <vaishnav.a@ti.com>
 
 properties:
   # cdns,qspi-nor.yaml

Documentation/devicetree/bindings/spi/cdns,qspi-nor.yaml

@@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
 title: Cadence Quad SPI controller
 
 maintainers:
-  - Pratyush Yadav <p.yadav@ti.com>
+  - Vaishnav Achath <vaishnav.a@ti.com>
 
 allOf:
   - $ref: spi-controller.yaml#

Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml

@@ -16,7 +16,7 @@ description:
   their own separate schema that should be referenced from here.
 
 maintainers:
-  - Pratyush Yadav <p.yadav@ti.com>
+  - Mark Brown <broonie@kernel.org>
 
 properties:
   reg:

Documentation/devicetree/bindings/thermal/rcar-thermal.yaml

@@ -42,7 +42,7 @@ properties:
     description:
       Address ranges of the thermal registers. If more then one range is given
       the first one must be the common registers followed by each sensor
-      according the datasheet.
+      according to the datasheet.
     minItems: 1
     maxItems: 4
 

Documentation/kbuild/kconfig-language.rst

@@ -525,8 +525,8 @@ followed by a test macro::
 If you need to expose a compiler capability to makefiles and/or C source files,
 `CC_HAS_` is the recommended prefix for the config option::
 
-  config CC_HAS_ASM_GOTO
-	def_bool $(success,$(srctree)/scripts/gcc-goto.sh $(CC))
+  config CC_HAS_FOO
+	def_bool $(success,$(srctree)/scripts/cc-check-foo.sh $(CC))
 
 Build as module only
 ~~~~~~~~~~~~~~~~~~~~

Documentation/tools/rtla/rtla-timerlat-hist.rst

@@ -33,7 +33,7 @@ EXAMPLE
 =======
 In the example below, **rtla timerlat hist** is set to run for *10* minutes,
 in the cpus *0-4*, *skipping zero* only lines. Moreover, **rtla timerlat
-hist** will change the priority of the *timelat* threads to run under
+hist** will change the priority of the *timerlat* threads to run under
 *SCHED_DEADLINE* priority, with a *10us* runtime every *1ms* period. The
 *1ms* period is also passed to the *timerlat* tracer::
 

MAINTAINERS

@@ -2178,7 +2178,7 @@ M:	Jean-Marie Verdun <verdun@hpe.com>
 M:	Nick Hawkins <nick.hawkins@hpe.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/arm/hpe,gxp.yaml
-F:	Documentation/devicetree/bindings/spi/hpe,gxp-spi.yaml
+F:	Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml
 F:	Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml
 F:	arch/arm/boot/dts/hpe-bmc*
 F:	arch/arm/boot/dts/hpe-gxp*
@@ -5145,6 +5145,7 @@ T:	git git://git.samba.org/sfrench/cifs-2.6.git
 F:	Documentation/admin-guide/cifs/
 F:	fs/cifs/
 F:	fs/smbfs_common/
+F:	include/uapi/linux/cifs
 
 COMPACTPCI HOTPLUG CORE
 M:	Scott Murray <scott@spiteful.org>

Makefile

@@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Hurr durr I'ma ninja sloth
 
 # *DOCUMENTATION*
@@ -1113,13 +1113,11 @@ vmlinux-alldirs	:= $(sort $(vmlinux-dirs) Documentation \
 		     $(patsubst %/,%,$(filter %/, $(core-) \
 			$(drivers-) $(libs-))))
 
-subdir-modorder := $(addsuffix modules.order,$(filter %/, \
-			$(core-y) $(core-m) $(libs-y) $(libs-m) \
-			$(drivers-y) $(drivers-m)))
-
 build-dirs	:= $(vmlinux-dirs)
 clean-dirs	:= $(vmlinux-alldirs)
 
+subdir-modorder := $(addsuffix /modules.order, $(build-dirs))
+
 # Externally visible symbols (used by link-vmlinux.sh)
 KBUILD_VMLINUX_OBJS := $(head-y) $(patsubst %/,%/built-in.a, $(core-y))
 KBUILD_VMLINUX_OBJS += $(addsuffix built-in.a, $(filter %/, $(libs-y)))

arch/Kconfig

@@ -53,7 +53,6 @@ config KPROBES
 config JUMP_LABEL
 	bool "Optimize very unlikely/likely branches"
 	depends on HAVE_ARCH_JUMP_LABEL
-	depends on CC_HAS_ASM_GOTO
 	select OBJTOOL if HAVE_JUMP_LABEL_HACK
 	help
 	 This option enables a transparent branch optimization that
@@ -1361,7 +1360,7 @@ config HAVE_PREEMPT_DYNAMIC_CALL
 
 config HAVE_PREEMPT_DYNAMIC_KEY
 	bool
-	depends on HAVE_ARCH_JUMP_LABEL && CC_HAS_ASM_GOTO
+	depends on HAVE_ARCH_JUMP_LABEL
 	select HAVE_PREEMPT_DYNAMIC
 	help
 	   An architecture should select this if it can handle the preemption

arch/arm64/include/asm/kvm_host.h

@@ -929,6 +929,10 @@ bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu);
 	(system_supports_mte() &&				\
 	 test_bit(KVM_ARCH_FLAG_MTE_ENABLED, &(kvm)->arch.flags))
 
+#define kvm_supports_32bit_el0()				\
+	(system_supports_32bit_el0() &&				\
+	 !static_branch_unlikely(&arm64_mismatched_32bit_el0))
+
 int kvm_trng_call(struct kvm_vcpu *vcpu);
 #ifdef CONFIG_KVM
 extern phys_addr_t hyp_mem_base;

arch/arm64/include/uapi/asm/kvm.h

@@ -75,9 +75,11 @@ struct kvm_regs {
 
 /* KVM_ARM_SET_DEVICE_ADDR ioctl id encoding */
 #define KVM_ARM_DEVICE_TYPE_SHIFT	0
-#define KVM_ARM_DEVICE_TYPE_MASK	(0xffff << KVM_ARM_DEVICE_TYPE_SHIFT)
+#define KVM_ARM_DEVICE_TYPE_MASK	GENMASK(KVM_ARM_DEVICE_TYPE_SHIFT + 15, \
+						KVM_ARM_DEVICE_TYPE_SHIFT)
 #define KVM_ARM_DEVICE_ID_SHIFT		16
-#define KVM_ARM_DEVICE_ID_MASK		(0xffff << KVM_ARM_DEVICE_ID_SHIFT)
+#define KVM_ARM_DEVICE_ID_MASK		GENMASK(KVM_ARM_DEVICE_ID_SHIFT + 15, \
+						KVM_ARM_DEVICE_ID_SHIFT)
 
 /* Supported device IDs */
 #define KVM_ARM_DEVICE_VGIC_V2		0

arch/arm64/kvm/arm.c

@@ -757,8 +757,7 @@ static bool vcpu_mode_is_bad_32bit(struct kvm_vcpu *vcpu)
 	if (likely(!vcpu_mode_is_32bit(vcpu)))
 		return false;
 
-	return !system_supports_32bit_el0() ||
-		static_branch_unlikely(&arm64_mismatched_32bit_el0);
+	return !kvm_supports_32bit_el0();
 }
 
 /**

arch/arm64/kvm/guest.c

@@ -242,7 +242,7 @@ static int set_core_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg)
 		u64 mode = (*(u64 *)valp) & PSR_AA32_MODE_MASK;
 		switch (mode) {
 		case PSR_AA32_MODE_USR:
-			if (!system_supports_32bit_el0())
+			if (!kvm_supports_32bit_el0())
 				return -EINVAL;
 			break;
 		case PSR_AA32_MODE_FIQ:

arch/arm64/kvm/mmu.c

@@ -993,7 +993,7 @@ transparent_hugepage_adjust(struct kvm *kvm, struct kvm_memory_slot *memslot,
 		 * THP doesn't start to split while we are adjusting the
 		 * refcounts.
 		 *
-		 * We are sure this doesn't happen, because mmu_notifier_retry
+		 * We are sure this doesn't happen, because mmu_invalidate_retry
 		 * was successful and we are holding the mmu_lock, so if this
 		 * THP is trying to split, it will be blocked in the mmu
 		 * notifier before touching any of the pages, specifically
@@ -1188,9 +1188,9 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 			return ret;
 	}
 
-	mmu_seq = vcpu->kvm->mmu_notifier_seq;
+	mmu_seq = vcpu->kvm->mmu_invalidate_seq;
 	/*
-	 * Ensure the read of mmu_notifier_seq happens before we call
+	 * Ensure the read of mmu_invalidate_seq happens before we call
 	 * gfn_to_pfn_prot (which calls get_user_pages), so that we don't risk
 	 * the page we just got a reference to gets unmapped before we have a
 	 * chance to grab the mmu_lock, which ensure that if the page gets
@@ -1246,7 +1246,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	else
 		write_lock(&kvm->mmu_lock);
 	pgt = vcpu->arch.hw_mmu->pgt;
-	if (mmu_notifier_retry(kvm, mmu_seq))
+	if (mmu_invalidate_retry(kvm, mmu_seq))
 		goto out_unlock;
 
 	/*

arch/arm64/kvm/sys_regs.c

@@ -652,7 +652,7 @@ static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	 */
 	val = ((pmcr & ~ARMV8_PMU_PMCR_MASK)
 	       | (ARMV8_PMU_PMCR_MASK & 0xdecafbad)) & (~ARMV8_PMU_PMCR_E);
-	if (!system_supports_32bit_el0())
+	if (!kvm_supports_32bit_el0())
 		val |= ARMV8_PMU_PMCR_LC;
 	__vcpu_sys_reg(vcpu, r->reg) = val;
 }
@@ -701,7 +701,7 @@ static bool access_pmcr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		val = __vcpu_sys_reg(vcpu, PMCR_EL0);
 		val &= ~ARMV8_PMU_PMCR_MASK;
 		val |= p->regval & ARMV8_PMU_PMCR_MASK;
-		if (!system_supports_32bit_el0())
+		if (!kvm_supports_32bit_el0())
 			val |= ARMV8_PMU_PMCR_LC;
 		__vcpu_sys_reg(vcpu, PMCR_EL0) = val;
 		kvm_pmu_handle_pmcr(vcpu, val);

arch/loongarch/include/asm/irq.h

@@ -81,7 +81,6 @@ extern struct acpi_vector_group msi_group[MAX_IO_PICS];
 #define GSI_MIN_PCH_IRQ		LOONGSON_PCH_IRQ_BASE
 #define GSI_MAX_PCH_IRQ		(LOONGSON_PCH_IRQ_BASE + 256 - 1)
 
-extern int find_pch_pic(u32 gsi);
 struct acpi_madt_lio_pic;
 struct acpi_madt_eio_pic;
 struct acpi_madt_ht_pic;

arch/mips/include/asm/kvm_host.h

@@ -84,8 +84,6 @@
 
 
 #define KVM_MAX_VCPUS		16
-/* memory slots that does not exposed to userspace */
-#define KVM_PRIVATE_MEM_SLOTS	0
 
 #define KVM_HALT_POLL_NS_DEFAULT 500000
 

arch/mips/kvm/mmu.c

@@ -615,17 +615,17 @@ static int kvm_mips_map_page(struct kvm_vcpu *vcpu, unsigned long gpa,
 	 * Used to check for invalidations in progress, of the pfn that is
 	 * returned by pfn_to_pfn_prot below.
 	 */
-	mmu_seq = kvm->mmu_notifier_seq;
+	mmu_seq = kvm->mmu_invalidate_seq;
 	/*
-	 * Ensure the read of mmu_notifier_seq isn't reordered with PTE reads in
-	 * gfn_to_pfn_prot() (which calls get_user_pages()), so that we don't
+	 * Ensure the read of mmu_invalidate_seq isn't reordered with PTE reads
+	 * in gfn_to_pfn_prot() (which calls get_user_pages()), so that we don't
 	 * risk the page we get a reference to getting unmapped before we have a
-	 * chance to grab the mmu_lock without mmu_notifier_retry() noticing.
+	 * chance to grab the mmu_lock without mmu_invalidate_retry() noticing.
 	 *
 	 * This smp_rmb() pairs with the effective smp_wmb() of the combination
 	 * of the pte_unmap_unlock() after the PTE is zapped, and the
 	 * spin_lock() in kvm_mmu_notifier_invalidate_<page|range_end>() before
-	 * mmu_notifier_seq is incremented.
+	 * mmu_invalidate_seq is incremented.
 	 */
 	smp_rmb();
 
@@ -638,7 +638,7 @@ static int kvm_mips_map_page(struct kvm_vcpu *vcpu, unsigned long gpa,
 
 	spin_lock(&kvm->mmu_lock);
 	/* Check if an invalidation has taken place since we got pfn */
-	if (mmu_notifier_retry(kvm, mmu_seq)) {
+	if (mmu_invalidate_retry(kvm, mmu_seq)) {
 		/*
 		 * This can happen when mappings are changed asynchronously, but
 		 * also synchronously if a COW is triggered by

arch/nios2/include/asm/entry.h

@@ -50,7 +50,8 @@
 	stw	r13, PT_R13(sp)
 	stw	r14, PT_R14(sp)
 	stw	r15, PT_R15(sp)
-	stw	r2, PT_ORIG_R2(sp)
+	movi	r24, -1
+	stw	r24, PT_ORIG_R2(sp)
 	stw	r7, PT_ORIG_R7(sp)
 
 	stw	ra, PT_RA(sp)

arch/nios2/include/asm/ptrace.h

@@ -74,6 +74,8 @@ extern void show_regs(struct pt_regs *);
 	((struct pt_regs *)((unsigned long)current_thread_info() + THREAD_SIZE)\
 		- 1)
 
+#define force_successful_syscall_return() (current_pt_regs()->orig_r2 = -1)
+
 int do_syscall_trace_enter(void);
 void do_syscall_trace_exit(void);
 #endif /* __ASSEMBLY__ */