Merge branch 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/g…

…it/mmarek/kbuild

* 'trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  scsi: drop unused Kconfig symbol
  pci: drop unused Kconfig symbol
  stmmac: drop unused Kconfig symbol
  x86: drop unused Kconfig symbol
  powerpc: drop unused Kconfig symbols
  powerpc: 40x: drop unused Kconfig symbol
  mips: drop unused Kconfig symbols
  openrisc: drop unused Kconfig symbols
  arm: at91: drop unused Kconfig symbol
  samples: drop unused Kconfig symbol
  m32r: drop unused Kconfig symbol
  score: drop unused Kconfig symbols
  sh: drop unused Kconfig symbol
  um: drop unused Kconfig symbol
  sparc: drop unused Kconfig symbol
  alpha: drop unused Kconfig symbol

Fix up trivial conflict in drivers/net/ethernet/stmicro/stmmac/Kconfig
as per Michal: the STMMAC_DUAL_MAC config variable is still unused and
should be deleted.

arch/alpha/Kconfig

@@ -445,11 +445,6 @@ config ALPHA_EV67
 	  Is this a machine based on the EV67 core?  If in doubt, select N here
 	  and the machine will be treated as an EV6.
 
-config ALPHA_EV7
-	bool
-	depends on ALPHA_MARVEL
-	default y
-
 config ALPHA_MCPCIA
 	bool
 	depends on ALPHA_RAWHIDE

arch/arm/mach-at91/Kconfig

@@ -195,12 +195,6 @@ if ARCH_AT91SAM9260
 
 comment "AT91SAM9260 Variants"
 
-config ARCH_AT91SAM9260_SAM9XE
-	bool "AT91SAM9XE"
-	help
-	  Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
-	  They are basically AT91SAM9260s with various sizes of embedded Flash.
-
 comment "AT91SAM9260 / AT91SAM9XE Board Type"
 
 config MACH_AT91SAM9260EK

arch/m32r/Kconfig

@@ -323,13 +323,6 @@ config NODES_SHIFT
 	default "1"
 	depends on NEED_MULTIPLE_NODES
 
-# turning this on wastes a bunch of space.
-# Summit needs it only when NUMA is on
-config BOOT_IOREMAP
-	bool
-	depends on NUMA
-	default n
-
 endmenu
 
 

arch/mips/Kconfig

@@ -820,10 +820,6 @@ config ARCH_HAS_ILOG2_U64
 	bool
 	default n
 
-config ARCH_SUPPORTS_OPROFILE
-	bool
-	default y if !MIPS_MT_SMTC
-
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -2255,16 +2251,6 @@ config HZ
 
 source "kernel/Kconfig.preempt"
 
-config MIPS_INSANE_LARGE
-	bool "Support for large 64-bit configurations"
-	depends on CPU_R10000 && 64BIT
-	help
-	  MIPS R10000 does support a 44 bit / 16TB address space as opposed to
-	  previous 64-bit processors which only supported 40 bit / 1TB. If you
-	  need processes of more than 1TB virtual address space, say Y here.
-	  This will result in additional memory usage, so it is not
-	  recommended for normal users.
-
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
 	depends on EXPERIMENTAL

arch/mips/powertv/Kconfig

@@ -1,5 +1,3 @@
-source "arch/mips/powertv/asic/Kconfig"
-
 config BOOTLOADER_DRIVER
 	bool "PowerTV Bootloader Driver Support"
 	default n

arch/openrisc/Kconfig

@@ -19,9 +19,6 @@ config OPENRISC
 config MMU
 	def_bool y
 
-config WISHBONE_BUS_BIG_ENDIAN
-	def_bool y
-
 config SYMBOL_PREFIX
         string
         default ""
@@ -160,15 +157,6 @@ config JUMP_UPON_UNHANDLED_EXCEPTION
 
 	  Say Y if you are unsure.
 
-config OPENRISC_EXCEPTION_DEBUG
-	bool "Print processor state at each exception"
-	default n
-	help
-	  This option will make your kernel unusable for all but kernel
-	  debugging.
-
-	  Say N if you are unsure.
-
 config OPENRISC_ESR_EXCEPTION_BUG_CHECK
 	bool "Check for possible ESR exception bug"
 	default n

arch/powerpc/Kconfig

@@ -379,10 +379,6 @@ config PHYP_DUMP
 
 	  If unsure, say "N"
 
-config PPCBUG_NVRAM
-	bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
-	default y if PPC_PREP
-
 config IRQ_ALL_CPUS
 	bool "Distribute interrupts on all CPUs by default"
 	depends on SMP && !MV64360
@@ -745,24 +741,6 @@ config 8260_PCI9
 	depends on PCI_8260 && !8272
 	default y
 
-choice
-	prompt "IDMA channel for PCI 9 workaround"
-	depends on 8260_PCI9
-
-config 8260_PCI9_IDMA1
-	bool "IDMA1"
-
-config 8260_PCI9_IDMA2
-	bool "IDMA2"
-
-config 8260_PCI9_IDMA3
-	bool "IDMA3"
-
-config 8260_PCI9_IDMA4
-	bool "IDMA4"
-
-endchoice
-
 source "drivers/pci/pcie/Kconfig"
 
 source "drivers/pci/Kconfig"

arch/powerpc/platforms/40x/Kconfig

@@ -107,11 +107,6 @@ config PPC40x_SIMPLE
 	help
 	  This option enables the simple PowerPC 40x platform support.
 
-# 40x specific CPU modules, selected based on the board above.
-config NP405H
-	bool
-	#depends on ASH
-
 # OAK doesn't exist but wanted to keep this around for any future 403GCX boards
 config 403GCX
 	bool

arch/powerpc/platforms/Kconfig.cputype

@@ -284,14 +284,6 @@ config PPC_MMU_NOHASH
 	def_bool y
 	depends on !PPC_STD_MMU
 
-config PPC_MMU_NOHASH_32
-	def_bool y
-	depends on PPC_MMU_NOHASH && PPC32
-
-config PPC_MMU_NOHASH_64
-	def_bool y
-	depends on PPC_MMU_NOHASH && PPC64
-
 config PPC_BOOK3E_MMU
 	def_bool y
 	depends on FSL_BOOKE || PPC_BOOK3E

arch/powerpc/platforms/embedded6xx/Kconfig

@@ -87,10 +87,6 @@ config MV64X60
 config MPC10X_OPENPIC
 	bool
 
-config MPC10X_STORE_GATHERING
-	bool "Enable MPC10x store gathering"
-	depends on MPC10X_BRIDGE
-
 config GAMECUBE_COMMON
 	bool
 

arch/powerpc/platforms/prep/Kconfig

@@ -21,12 +21,3 @@ config PREP_RESIDUAL
 	  or pass the 'noresidual' option to the kernel.
 
 	  If you are running a PReP system, say Y here, otherwise say N.
-
-config PROC_PREPRESIDUAL
-	bool "Support for reading of PReP Residual Data in /proc"
-	depends on PREP_RESIDUAL && PROC_FS
-	help
-	  Enabling this option will create a /proc/residual file which allows
-	  you to get at the residual data on PReP systems.  You will need a tool
-	  (lsresidual) to parse it.  If you aren't on a PReP system, you don't
-	  want this.

arch/powerpc/platforms/wsp/Kconfig

@@ -24,8 +24,3 @@ endmenu
 config PPC_A2_DD2
 	bool "Support for DD2 based A2/WSP systems"
 	depends on PPC_A2
-
-config WORKAROUND_ERRATUM_463
-	depends on PPC_A2_DD2
-	bool "Workaround erratum 463"
-	default y

arch/score/Kconfig

@@ -52,16 +52,6 @@ config GENERIC_CALIBRATE_DELAY
 config GENERIC_CLOCKEVENTS
 	def_bool y
 
-config SCHED_NO_NO_OMIT_FRAME_POINTER
-	def_bool y
-
-config GENERIC_SYSCALL_TABLE
-	def_bool y
-
-config SCORE_L1_CACHE_SHIFT
-	int
-	default "4"
-
 menu "Kernel type"
 
 config 32BIT
@@ -96,15 +86,6 @@ config STACKTRACE_SUPPORT
 
 source "init/Kconfig"
 
-config PROBE_INITRD_HEADER
-	bool "Probe initrd header created by addinitrd"
-	depends on BLK_DEV_INITRD
-	help
-	  Probe initrd header at the last page of kernel image.
-	  Say Y here if you are using arch/score/boot/addinitrd.c to
-	  add initrd or initramfs image to the kernel image.
-	  Otherwise, say N.
-
 config MMU
 	def_bool y
 

arch/sparc/Kconfig

@@ -560,12 +560,7 @@ config SUN_OPENPROMFS
 	  Only choose N if you know in advance that you will not need to modify
 	  OpenPROM settings on the running system.
 
-# Makefile helpers
-config SPARC32_PCI
-	bool
-	default y
-	depends on SPARC32 && PCI
-
+# Makefile helper
 config SPARC64_PCI
 	bool
 	default y

arch/x86/Kconfig

@@ -194,9 +194,6 @@ config NEED_PER_CPU_EMBED_FIRST_CHUNK
 config NEED_PER_CPU_PAGE_FIRST_CHUNK
 	def_bool y
 
-config HAVE_CPUMASK_OF_CPU_MAP
-	def_bool X86_64_SMP
-
 config ARCH_HIBERNATION_POSSIBLE
 	def_bool y
 

arch/x86/um/Kconfig

@@ -57,9 +57,6 @@ config ARCH_HAS_SC_SIGNALS
 config ARCH_REUSE_HOST_VSYSCALL_AREA
 	def_bool !64BIT
 
-config SMP_BROKEN
-	def_bool 64BIT
-
 config GENERIC_HWEIGHT
 	def_bool y
 

drivers/net/ethernet/stmicro/stmmac/Kconfig

@@ -29,15 +29,6 @@ config STMMAC_DA
 	  By default, the DMA arbitration scheme is based on Round-robin
 	  (rx:tx priority is 1:1).
 
-config STMMAC_DUAL_MAC
-	bool "STMMAC: dual mac support (EXPERIMENTAL)"
-	default n
-        depends on EXPERIMENTAL && STMMAC_ETH && !STMMAC_TIMER
-	---help---
-	  Some ST SoCs (for example the stx7141 and stx7200c2) have two
-	  Ethernet Controllers. This option turns on the second Ethernet
-	  device on this kind of platforms.
-
 config STMMAC_TIMER
 	bool "STMMAC Timer optimisation"
 	default n

drivers/pci/Kconfig

@@ -51,17 +51,6 @@ config XEN_PCIDEV_FRONTEND
           The PCI device frontend driver allows the kernel to import arbitrary
           PCI devices from a PCI backend to support PCI driver domains.
 
-config XEN_PCIDEV_FE_DEBUG
-        bool "Xen PCI Frontend debugging"
-        depends on XEN_PCIDEV_FRONTEND && PCI_DEBUG
-	help
-	  Say Y here if you want the Xen PCI frontend to produce a bunch of debug
-	  messages to the system log.  Select this if you are having a
-	  problem with Xen PCI frontend support and want to see more of what is
-	  going on.
-
-	  When in doubt, say N.
-
 config HT_IRQ
 	bool "Interrupts on hypertransport devices"
 	default y

drivers/scsi/Kconfig

@@ -617,20 +617,6 @@ config SCSI_ARCMSR
 	  To compile this driver as a module, choose M here: the
 	  module will be called arcmsr (modprobe arcmsr).
 
-config SCSI_ARCMSR_AER
-	bool "Enable PCI Error Recovery Capability in Areca Driver(ARCMSR)"
-	depends on SCSI_ARCMSR && PCIEAER
-	default n
-	help
-	  The advanced error reporting(AER) capability is "NOT" provided by
-	  ARC1200/1201/1202 SATA RAID controllers cards.
-	  If your card is one of ARC1200/1201/1202, please use the default setting, n.
-	  If your card is other models, you could pick it
-	  on condition that the kernel version is greater than 2.6.19.
-	  This function is maintained driver by Nick Cheng. If you have any
-	  problems or suggestion, you are welcome to contact with <nick.cheng@areca.com.tw>.
-	  To enable this function, choose Y here.
-
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 source "drivers/scsi/mpt2sas/Kconfig"
 

samples/Kconfig

@@ -61,10 +61,4 @@ config SAMPLE_KDB
 	  Build an example of how to dynamically add the hello
 	  command to the kdb shell.
 
-config SAMPLE_HIDRAW
-	bool "Build simple hidraw example"
-	depends on HIDRAW && HEADERS_CHECK
-	help
-	  Build an example of how to use hidraw from userspace.
-
 endif # SAMPLES