Merge tag 'lkdtm-4.6-rc3' of git://git.kernel.org/pub/scm/linux/kerne…

…l/git/kees/linux into char-misc-linus

Kees briefly writes:

fixes some possible memory allocation leaks on error paths

Documentation/devicetree/bindings/clock/qca,ath79-pll.txt

@@ -3,7 +3,7 @@ Binding for Qualcomm Atheros AR7xxx/AR9XXX PLL controller
 The PPL controller provides the 3 main clocks of the SoC: CPU, DDR and AHB.
 
 Required Properties:
-- compatible: has to be "qca,<soctype>-cpu-intc" and one of the following
+- compatible: has to be "qca,<soctype>-pll" and one of the following
   fallbacks:
   - "qca,ar7100-pll"
   - "qca,ar7240-pll"
@@ -21,8 +21,8 @@ Optional properties:
 
 Example:
 
-	memory-controller@18050000 {
-		compatible = "qca,ar9132-ppl", "qca,ar9130-pll";
+	pll-controller@18050000 {
+		compatible = "qca,ar9132-pll", "qca,ar9130-pll";
 		reg = <0x18050000 0x20>;
 
 		clock-names = "ref";

Documentation/devicetree/bindings/pinctrl/img,pistachio-pinctrl.txt

@@ -134,12 +134,12 @@ mfio80		ddr_debug, mips_trace_data, mips_debug
 mfio81		dreq0, mips_trace_data, eth_debug
 mfio82		dreq1, mips_trace_data, eth_debug
 mfio83		mips_pll_lock, mips_trace_data, usb_debug
-mfio84		sys_pll_lock, mips_trace_data, usb_debug
-mfio85		wifi_pll_lock, mips_trace_data, sdhost_debug
-mfio86		bt_pll_lock, mips_trace_data, sdhost_debug
-mfio87		rpu_v_pll_lock, dreq2, socif_debug
-mfio88		rpu_l_pll_lock, dreq3, socif_debug
-mfio89		audio_pll_lock, dreq4, dreq5
+mfio84		audio_pll_lock, mips_trace_data, usb_debug
+mfio85		rpu_v_pll_lock, mips_trace_data, sdhost_debug
+mfio86		rpu_l_pll_lock, mips_trace_data, sdhost_debug
+mfio87		sys_pll_lock, dreq2, socif_debug
+mfio88		wifi_pll_lock, dreq3, socif_debug
+mfio89		bt_pll_lock, dreq4, dreq5
 tck
 trstn
 tdi

Documentation/filesystems/cramfs.txt

@@ -38,7 +38,7 @@ the update lasts only as long as the inode is cached in memory, after
 which the timestamp reverts to 1970, i.e. moves backwards in time.
 
 Currently, cramfs must be written and read with architectures of the
-same endianness, and can be read only by kernels with PAGE_CACHE_SIZE
+same endianness, and can be read only by kernels with PAGE_SIZE
 == 4096.  At least the latter of these is a bug, but it hasn't been
 decided what the best fix is.  For the moment if you have larger pages
 you can just change the #define in mkcramfs.c, so long as you don't

Documentation/filesystems/tmpfs.txt

@@ -60,7 +60,7 @@ size:      The limit of allocated bytes for this tmpfs instance. The
            default is half of your physical RAM without swap. If you
            oversize your tmpfs instances the machine will deadlock
            since the OOM handler will not be able to free that memory.
-nr_blocks: The same as size, but in blocks of PAGE_CACHE_SIZE.
+nr_blocks: The same as size, but in blocks of PAGE_SIZE.
 nr_inodes: The maximum number of inodes for this instance. The default
            is half of the number of your physical RAM pages, or (on a
            machine with highmem) the number of lowmem RAM pages,

Documentation/filesystems/vfs.txt

@@ -708,9 +708,9 @@ struct address_space_operations {
 	from the address space.  This generally corresponds to either a
 	truncation, punch hole  or a complete invalidation of the address
 	space (in the latter case 'offset' will always be 0 and 'length'
-	will be PAGE_CACHE_SIZE). Any private data associated with the page
+	will be PAGE_SIZE). Any private data associated with the page
 	should be updated to reflect this truncation.  If offset is 0 and
-	length is PAGE_CACHE_SIZE, then the private data should be released,
+	length is PAGE_SIZE, then the private data should be released,
 	because the page must be able to be completely discarded.  This may
 	be done by calling the ->releasepage function, but in this case the
 	release MUST succeed.

MAINTAINERS

@@ -8712,6 +8712,8 @@ F:	drivers/pinctrl/sh-pfc/
 
 PIN CONTROLLER - SAMSUNG
 M:	Tomasz Figa <tomasz.figa@gmail.com>
+M:	Krzysztof Kozlowski <k.kozlowski@samsung.com>
+M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
 S:	Maintained
@@ -12205,9 +12207,9 @@ S:	Maintained
 F:	drivers/media/tuners/tuner-xc2028.*
 
 XEN HYPERVISOR INTERFACE
-M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 M:	Boris Ostrovsky <boris.ostrovsky@oracle.com>
 M:	David Vrabel <david.vrabel@citrix.com>
+M:	Juergen Gross <jgross@suse.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip.git
 S:	Supported
@@ -12219,16 +12221,16 @@ F:	include/xen/
 F:	include/uapi/xen/
 
 XEN HYPERVISOR ARM
-M:	Stefano Stabellini <stefano.stabellini@eu.citrix.com>
+M:	Stefano Stabellini <sstabellini@kernel.org>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 F:	arch/arm/xen/
 F:	arch/arm/include/asm/xen/
 
 XEN HYPERVISOR ARM64
-M:	Stefano Stabellini <stefano.stabellini@eu.citrix.com>
+M:	Stefano Stabellini <sstabellini@kernel.org>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 F:	arch/arm64/xen/
 F:	arch/arm64/include/asm/xen/
 

arch/arc/mm/cache.c

@@ -628,7 +628,7 @@ void flush_dcache_page(struct page *page)
 
 		/* kernel reading from page with U-mapping */
 		phys_addr_t paddr = (unsigned long)page_address(page);
-		unsigned long vaddr = page->index << PAGE_CACHE_SHIFT;
+		unsigned long vaddr = page->index << PAGE_SHIFT;
 
 		if (addr_not_cache_congruent(paddr, vaddr))
 			__flush_dcache_page(paddr, vaddr);

arch/arm/kvm/arm.c

@@ -1061,15 +1061,27 @@ static void cpu_init_hyp_mode(void *dummy)
 	kvm_arm_init_debug();
 }
 
+static void cpu_hyp_reinit(void)
+{
+	if (is_kernel_in_hyp_mode()) {
+		/*
+		 * cpu_init_stage2() is safe to call even if the PM
+		 * event was cancelled before the CPU was reset.
+		 */
+		cpu_init_stage2(NULL);
+	} else {
+		if (__hyp_get_vectors() == hyp_default_vectors)
+			cpu_init_hyp_mode(NULL);
+	}
+}
+
 static int hyp_init_cpu_notify(struct notifier_block *self,
 			       unsigned long action, void *cpu)
 {
 	switch (action) {
 	case CPU_STARTING:
 	case CPU_STARTING_FROZEN:
-		if (__hyp_get_vectors() == hyp_default_vectors)
-			cpu_init_hyp_mode(NULL);
-		break;
+		cpu_hyp_reinit();
 	}
 
 	return NOTIFY_OK;
@@ -1084,9 +1096,8 @@ static int hyp_init_cpu_pm_notifier(struct notifier_block *self,
 				    unsigned long cmd,
 				    void *v)
 {
-	if (cmd == CPU_PM_EXIT &&
-	    __hyp_get_vectors() == hyp_default_vectors) {
-		cpu_init_hyp_mode(NULL);
+	if (cmd == CPU_PM_EXIT) {
+		cpu_hyp_reinit();
 		return NOTIFY_OK;
 	}
 
@@ -1127,6 +1138,22 @@ static int init_subsystems(void)
 {
 	int err;
 
+	/*
+	 * Register CPU Hotplug notifier
+	 */
+	cpu_notifier_register_begin();
+	err = __register_cpu_notifier(&hyp_init_cpu_nb);
+	cpu_notifier_register_done();
+	if (err) {
+		kvm_err("Cannot register KVM init CPU notifier (%d)\n", err);
+		return err;
+	}
+
+	/*
+	 * Register CPU lower-power notifier
+	 */
+	hyp_cpu_pm_init();
+
 	/*
 	 * Init HYP view of VGIC
 	 */
@@ -1270,19 +1297,6 @@ static int init_hyp_mode(void)
 	free_boot_hyp_pgd();
 #endif
 
-	cpu_notifier_register_begin();
-
-	err = __register_cpu_notifier(&hyp_init_cpu_nb);
-
-	cpu_notifier_register_done();
-
-	if (err) {
-		kvm_err("Cannot register HYP init CPU notifier (%d)\n", err);
-		goto out_err;
-	}
-
-	hyp_cpu_pm_init();
-
 	/* set size of VMID supported by CPU */
 	kvm_vmid_bits = kvm_get_vmid_bits();
 	kvm_info("%d-bit VMID\n", kvm_vmid_bits);

arch/arm/mm/flush.c

@@ -235,7 +235,7 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
 	 */
 	if (mapping && cache_is_vipt_aliasing())
 		flush_pfn_alias(page_to_pfn(page),
-				page->index << PAGE_CACHE_SHIFT);
+				page->index << PAGE_SHIFT);
 }
 
 static void __flush_dcache_aliases(struct address_space *mapping, struct page *page)
@@ -250,7 +250,7 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
 	 *   data in the current VM view associated with this page.
 	 * - aliasing VIPT: we only need to find one mapping of this page.
 	 */
-	pgoff = page->index << (PAGE_CACHE_SHIFT - PAGE_SHIFT);
+	pgoff = page->index;
 
 	flush_dcache_mmap_lock(mapping);
 	vma_interval_tree_foreach(mpnt, &mapping->i_mmap, pgoff, pgoff) {

arch/arm64/include/asm/kvm_arm.h

@@ -124,7 +124,9 @@
 #define VTCR_EL2_SL0_LVL1	(1 << 6)
 #define VTCR_EL2_T0SZ_MASK	0x3f
 #define VTCR_EL2_T0SZ_40B	24
-#define VTCR_EL2_VS		19
+#define VTCR_EL2_VS_SHIFT	19
+#define VTCR_EL2_VS_8BIT	(0 << VTCR_EL2_VS_SHIFT)
+#define VTCR_EL2_VS_16BIT	(1 << VTCR_EL2_VS_SHIFT)
 
 /*
  * We configure the Stage-2 page tables to always restrict the IPA space to be

arch/arm64/include/asm/sysreg.h

@@ -141,6 +141,9 @@
 #define ID_AA64MMFR1_VMIDBITS_SHIFT	4
 #define ID_AA64MMFR1_HADBS_SHIFT	0
 
+#define ID_AA64MMFR1_VMIDBITS_8		0
+#define ID_AA64MMFR1_VMIDBITS_16	2
+
 /* id_aa64mmfr2 */
 #define ID_AA64MMFR2_UAO_SHIFT		4
 

arch/arm64/kvm/hyp/s2-setup.c

@@ -36,8 +36,10 @@ void __hyp_text __init_stage2_translation(void)
 	 * Read the VMIDBits bits from ID_AA64MMFR1_EL1 and set the VS
 	 * bit in VTCR_EL2.
 	 */
-	tmp = (read_sysreg(id_aa64mmfr1_el1) >> 4) & 0xf;
-	val |= (tmp == 2) ? VTCR_EL2_VS : 0;
+	tmp = (read_sysreg(id_aa64mmfr1_el1) >> ID_AA64MMFR1_VMIDBITS_SHIFT) & 0xf;
+	val |= (tmp == ID_AA64MMFR1_VMIDBITS_16) ?
+			VTCR_EL2_VS_16BIT :
+			VTCR_EL2_VS_8BIT;
 
 	write_sysreg(val, vtcr_el2);
 }

arch/mips/alchemy/common/dbdma.c

@@ -261,7 +261,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
 	au1x_dma_chan_t *cp;
 
 	/*
-	 * We do the intialization on the first channel allocation.
+	 * We do the initialization on the first channel allocation.
 	 * We have to wait because of the interrupt handler initialization
 	 * which can't be done successfully during board set up.
 	 */
@@ -964,7 +964,7 @@ u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
 	dp->dscr_source1 = dscr->dscr_source1;
 	dp->dscr_cmd1 = dscr->dscr_cmd1;
 	nbytes = dscr->dscr_cmd1;
-	/* Allow the caller to specifiy if an interrupt is generated */
+	/* Allow the caller to specify if an interrupt is generated */
 	dp->dscr_cmd0 &= ~DSCR_CMD0_IE;
 	dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
 	ctp->chan_ptr->ddma_dbell = 0;

arch/mips/alchemy/devboards/db1000.c

@@ -503,15 +503,15 @@ int __init db1000_dev_setup(void)
 	if (board == BCSR_WHOAMI_DB1500) {
 		c0 = AU1500_GPIO2_INT;
 		c1 = AU1500_GPIO5_INT;
-		d0 = AU1500_GPIO0_INT;
-		d1 = AU1500_GPIO3_INT;
+		d0 = 0;	/* GPIO number, NOT irq! */
+		d1 = 3; /* GPIO number, NOT irq! */
 		s0 = AU1500_GPIO1_INT;
 		s1 = AU1500_GPIO4_INT;
 	} else if (board == BCSR_WHOAMI_DB1100) {
 		c0 = AU1100_GPIO2_INT;
 		c1 = AU1100_GPIO5_INT;
-		d0 = AU1100_GPIO0_INT;
-		d1 = AU1100_GPIO3_INT;
+		d0 = 0; /* GPIO number, NOT irq! */
+		d1 = 3; /* GPIO number, NOT irq! */
 		s0 = AU1100_GPIO1_INT;
 		s1 = AU1100_GPIO4_INT;
 
@@ -545,15 +545,15 @@ int __init db1000_dev_setup(void)
 	} else if (board == BCSR_WHOAMI_DB1000) {
 		c0 = AU1000_GPIO2_INT;
 		c1 = AU1000_GPIO5_INT;
-		d0 = AU1000_GPIO0_INT;
-		d1 = AU1000_GPIO3_INT;
+		d0 = 0; /* GPIO number, NOT irq! */
+		d1 = 3; /* GPIO number, NOT irq! */
 		s0 = AU1000_GPIO1_INT;
 		s1 = AU1000_GPIO4_INT;
 		platform_add_devices(db1000_devs, ARRAY_SIZE(db1000_devs));
 	} else if ((board == BCSR_WHOAMI_PB1500) ||
 		   (board == BCSR_WHOAMI_PB1500R2)) {
 		c0 = AU1500_GPIO203_INT;
-		d0 = AU1500_GPIO201_INT;
+		d0 = 1; /* GPIO number, NOT irq! */
 		s0 = AU1500_GPIO202_INT;
 		twosocks = 0;
 		flashsize = 64;
@@ -566,7 +566,7 @@ int __init db1000_dev_setup(void)
 		 */
 	} else if (board == BCSR_WHOAMI_PB1100) {
 		c0 = AU1100_GPIO11_INT;
-		d0 = AU1100_GPIO9_INT;
+		d0 = 9; /* GPIO number, NOT irq! */
 		s0 = AU1100_GPIO10_INT;
 		twosocks = 0;
 		flashsize = 64;
@@ -583,7 +583,6 @@ int __init db1000_dev_setup(void)
 	} else
 		return 0; /* unknown board, no further dev setup to do */
 
-	irq_set_irq_type(d0, IRQ_TYPE_EDGE_BOTH);
 	irq_set_irq_type(c0, IRQ_TYPE_LEVEL_LOW);
 	irq_set_irq_type(s0, IRQ_TYPE_LEVEL_LOW);
 
@@ -597,7 +596,6 @@ int __init db1000_dev_setup(void)
 		c0, d0, /*s0*/0, 0, 0);
 
 	if (twosocks) {
-		irq_set_irq_type(d1, IRQ_TYPE_EDGE_BOTH);
 		irq_set_irq_type(c1, IRQ_TYPE_LEVEL_LOW);
 		irq_set_irq_type(s1, IRQ_TYPE_LEVEL_LOW);
 

arch/mips/alchemy/devboards/db1550.c

@@ -514,7 +514,7 @@ static void __init db1550_devices(void)
 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x000400000 - 1,
 		AU1000_PCMCIA_IO_PHYS_ADDR,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x000010000 - 1,
-		AU1550_GPIO3_INT, AU1550_GPIO0_INT,
+		AU1550_GPIO3_INT, 0,
 		/*AU1550_GPIO21_INT*/0, 0, 0);
 
 	db1x_register_pcmcia_socket(
@@ -524,7 +524,7 @@ static void __init db1550_devices(void)
 		AU1000_PCMCIA_MEM_PHYS_ADDR  + 0x004400000 - 1,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004000000,
 		AU1000_PCMCIA_IO_PHYS_ADDR   + 0x004010000 - 1,
-		AU1550_GPIO5_INT, AU1550_GPIO1_INT,
+		AU1550_GPIO5_INT, 1,
 		/*AU1550_GPIO22_INT*/0, 0, 1);
 
 	platform_device_register(&db1550_nand_dev);