Merge branch 'linus' into x86/cleanups, to resolve conflict

These two commits interact:

 upstream:     73da582 ("x86/cpu/topology: Remove limit of CPUs due to disabled IO/APIC")
 x86/cleanups: 13148e2 ("x86/apic: Remove "disablelapic" cmdline option")

Resolve it.

 Conflicts:
	arch/x86/kernel/cpu/topology.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/ABI/testing/sysfs-class-watchdog

@@ -76,7 +76,7 @@ Description:
 		timeout when the pretimeout interrupt is delivered.  Pretimeout
 		is an optional feature.
 
-What:		/sys/class/watchdog/watchdogn/pretimeout_avaialable_governors
+What:		/sys/class/watchdog/watchdogn/pretimeout_available_governors
 Date:		February 2017
 Contact:	Wim Van Sebroeck <wim@iguana.be>
 Description:

Documentation/admin-guide/kernel-parameters.txt

@@ -4977,6 +4977,11 @@
 			       can be preempted anytime.  Tasks will also yield
 			       contended spinlocks (if the critical section isn't
 			       explicitly preempt disabled beyond the lock itself).
+			lazy - Scheduler controlled. Similar to full but instead
+			       of preempting the task immediately, the task gets
+			       one HZ tick time to yield itself before the
+			       preemption will be forced. One preemption is when the
+			       task returns to user space.
 
 	print-fatal-signals=
 			[KNL] debug: print fatal signals

Documentation/arch/arm64/silicon-errata.rst

@@ -255,8 +255,9 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip08 SMMU PMCG | #162001800      | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
-| Hisilicon      | Hip{08,09,10,10C| #162001900      | N/A                         |
-|                | ,11} SMMU PMCG  |                 |                             |
+| Hisilicon      | Hip{08,09,09A,10| #162001900      | N/A                         |
+|                | ,10C,11}        |                 |                             |
+|                | SMMU PMCG       |                 |                             |
 +----------------+-----------------+-----------------+-----------------------------+
 | Hisilicon      | Hip09           | #162100801      | HISILICON_ERRATUM_162100801 |
 +----------------+-----------------+-----------------+-----------------------------+

Documentation/core-api/symbol-namespaces.rst

@@ -46,7 +46,7 @@ Please note that due to macro expansion that argument needs to be a
 preprocessor symbol. E.g. to export the symbol ``usb_stor_suspend`` into the
 namespace ``USB_STORAGE``, use::
 
-	EXPORT_SYMBOL_NS(usb_stor_suspend, USB_STORAGE);
+	EXPORT_SYMBOL_NS(usb_stor_suspend, "USB_STORAGE");
 
 The corresponding ksymtab entry struct ``kernel_symbol`` will have the member
 ``namespace`` set accordingly. A symbol that is exported without a namespace will
@@ -68,7 +68,7 @@ is to define the default namespace in the ``Makefile`` of the subsystem. E.g. to
 export all symbols defined in usb-common into the namespace USB_COMMON, add a
 line like this to drivers/usb/common/Makefile::
 
-	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON
+	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE='"USB_COMMON"'
 
 That will affect all EXPORT_SYMBOL() and EXPORT_SYMBOL_GPL() statements. A
 symbol exported with EXPORT_SYMBOL_NS() while this definition is present, will
@@ -79,7 +79,7 @@ A second option to define the default namespace is directly in the compilation
 unit as preprocessor statement. The above example would then read::
 
 	#undef  DEFAULT_SYMBOL_NAMESPACE
-	#define DEFAULT_SYMBOL_NAMESPACE USB_COMMON
+	#define DEFAULT_SYMBOL_NAMESPACE "USB_COMMON"
 
 within the corresponding compilation unit before any EXPORT_SYMBOL macro is
 used.
@@ -94,7 +94,7 @@ for the namespaces it uses symbols from. E.g. a module using the
 usb_stor_suspend symbol from above, needs to import the namespace USB_STORAGE
 using a statement like::
 
-	MODULE_IMPORT_NS(USB_STORAGE);
+	MODULE_IMPORT_NS("USB_STORAGE");
 
 This will create a ``modinfo`` tag in the module for each imported namespace.
 This has the side effect, that the imported namespaces of a module can be

Documentation/devicetree/bindings/power/mediatek,power-controller.yaml

@@ -55,6 +55,10 @@ patternProperties:
             patternProperties:
               "^power-domain@[0-9a-f]+$":
                 $ref: "#/$defs/power-domain-node"
+                patternProperties:
+                  "^power-domain@[0-9a-f]+$":
+                    $ref: "#/$defs/power-domain-node"
+                    unevaluatedProperties: false
                 unevaluatedProperties: false
             unevaluatedProperties: false
         unevaluatedProperties: false

Documentation/devicetree/bindings/watchdog/airoha,en7581-wdt.yaml

@@ -0,0 +1,47 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/airoha,en7581-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 Watchdog Timer
+
+maintainers:
+  - Christian Marangi <ansuelsmth@gmail.com>
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: airoha,en7581-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    description: BUS clock (timer ticks at half the BUS clock)
+    maxItems: 1
+
+  clock-names:
+    const: bus
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/en7523-clk.h>
+
+    watchdog@1fbf0100 {
+        compatible = "airoha,en7581-wdt";
+        reg = <0x1fbf0100 0x3c>;
+
+        clocks = <&scuclk EN7523_CLK_BUS>;
+        clock-names = "bus";
+    };

Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.yaml

@@ -48,6 +48,8 @@ properties:
   clocks:
     maxItems: 1
 
+  big-endian: true
+
   fsl,ext-reset-output:
     $ref: /schemas/types.yaml#/definitions/flag
     description: |
@@ -93,6 +95,18 @@ allOf:
       properties:
         fsl,suspend-in-wait: false
 
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              enum:
+                - fsl,ls1012a-wdt
+                - fsl,ls1043a-wdt
+    then:
+      properties:
+        big-endian: false
+
 unevaluatedProperties: false
 
 examples:

Documentation/devicetree/bindings/watchdog/qcom-wdt.yaml

@@ -26,6 +26,8 @@ properties:
               - qcom,apss-wdt-msm8994
               - qcom,apss-wdt-qcm2290
               - qcom,apss-wdt-qcs404
+              - qcom,apss-wdt-qcs615
+              - qcom,apss-wdt-qcs8300
               - qcom,apss-wdt-sa8255p
               - qcom,apss-wdt-sa8775p
               - qcom,apss-wdt-sc7180

Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml

@@ -26,6 +26,7 @@ properties:
           - samsung,exynos7-wdt                   # for Exynos7
           - samsung,exynos850-wdt                 # for Exynos850
           - samsung,exynosautov9-wdt              # for Exynosautov9
+          - samsung,exynosautov920-wdt            # for Exynosautov920
       - items:
           - enum:
               - tesla,fsd-wdt
@@ -77,6 +78,7 @@ allOf:
               - samsung,exynos7-wdt
               - samsung,exynos850-wdt
               - samsung,exynosautov9-wdt
+              - samsung,exynosautov920-wdt
     then:
       required:
         - samsung,syscon-phandle
@@ -88,6 +90,7 @@ allOf:
               - google,gs101-wdt
               - samsung,exynos850-wdt
               - samsung,exynosautov9-wdt
+              - samsung,exynosautov920-wdt
     then:
       properties:
         clocks:

Documentation/networking/bareudp.rst

@@ -6,16 +6,17 @@ Bare UDP Tunnelling Module Documentation
 
 There are various L3 encapsulation standards using UDP being discussed to
 leverage the UDP based load balancing capability of different networks.
-MPLSoUDP (__ https://tools.ietf.org/html/rfc7510) is one among them.
+MPLSoUDP (https://tools.ietf.org/html/rfc7510) is one among them.
 
 The Bareudp tunnel module provides a generic L3 encapsulation support for
 tunnelling different L3 protocols like MPLS, IP, NSH etc. inside a UDP tunnel.
 
 Special Handling
 ----------------
+
 The bareudp device supports special handling for MPLS & IP as they can have
 multiple ethertypes.
-MPLS procotcol can have ethertypes ETH_P_MPLS_UC  (unicast) & ETH_P_MPLS_MC (multicast).
+The MPLS protocol can have ethertypes ETH_P_MPLS_UC (unicast) & ETH_P_MPLS_MC (multicast).
 IP protocol can have ethertypes ETH_P_IP (v4) & ETH_P_IPV6 (v6).
 This special handling can be enabled only for ethertypes ETH_P_IP & ETH_P_MPLS_UC
 with a flag called multiproto mode.
@@ -52,7 +53,7 @@ be enabled explicitly with the "multiproto" flag.
 3) Device Usage
 
 The bareudp device could be used along with OVS or flower filter in TC.
-The OVS or TC flower layer must set the tunnel information in SKB dst field before
-sending packet buffer to the bareudp device for transmission. On reception the
-bareudp device extracts and stores the tunnel information in SKB dst field before
+The OVS or TC flower layer must set the tunnel information in the SKB dst field before
+sending the packet buffer to the bareudp device for transmission. On reception, the
+bareUDP device extracts and stores the tunnel information in the SKB dst field before
 passing the packet buffer to the network stack.

Documentation/translations/it_IT/core-api/symbol-namespaces.rst

@@ -43,7 +43,7 @@ Tenete presente che per via dell'espansione delle macro questo argomento deve
 essere un simbolo di preprocessore. Per esempio per esportare il
 simbolo ``usb_stor_suspend`` nello spazio dei nomi ``USB_STORAGE`` usate::
 
-	EXPORT_SYMBOL_NS(usb_stor_suspend, USB_STORAGE);
+	EXPORT_SYMBOL_NS(usb_stor_suspend, "USB_STORAGE");
 
 Di conseguenza, nella tabella dei simboli del kernel ci sarà una voce
 rappresentata dalla struttura ``kernel_symbol`` che avrà il campo
@@ -69,7 +69,7 @@ Per esempio per esportare tutti i simboli definiti in usb-common nello spazio
 dei nomi USB_COMMON, si può aggiungere la seguente linea in
 drivers/usb/common/Makefile::
 
-	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON
+	ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE='"USB_COMMON"'
 
 Questo cambierà tutte le macro EXPORT_SYMBOL() ed EXPORT_SYMBOL_GPL(). Invece,
 un simbolo esportato con EXPORT_SYMBOL_NS() non verrà cambiato e il simbolo
@@ -79,7 +79,7 @@ Una seconda possibilità è quella di definire il simbolo di preprocessore
 direttamente nei file da compilare. L'esempio precedente diventerebbe::
 
 	#undef  DEFAULT_SYMBOL_NAMESPACE
-	#define DEFAULT_SYMBOL_NAMESPACE USB_COMMON
+	#define DEFAULT_SYMBOL_NAMESPACE "USB_COMMON"
 
 Questo va messo prima di un qualsiasi uso di EXPORT_SYMBOL.
 
@@ -94,7 +94,7 @@ dei nomi che contiene i simboli desiderati. Per esempio un modulo che
 usa il simbolo usb_stor_suspend deve importare lo spazio dei nomi
 USB_STORAGE usando la seguente dichiarazione::
 
-	MODULE_IMPORT_NS(USB_STORAGE);
+	MODULE_IMPORT_NS("USB_STORAGE");
 
 Questo creerà un'etichetta ``modinfo`` per ogni spazio dei nomi
 importato. Un risvolto di questo fatto è che gli spazi dei

Documentation/translations/zh_CN/core-api/symbol-namespaces.rst

@@ -48,7 +48,7 @@
 要是一个预处理器符号。例如，要把符号 ``usb_stor_suspend`` 导出到命名空间 ``USB_STORAGE``，
 请使用::
 
-       EXPORT_SYMBOL_NS(usb_stor_suspend, USB_STORAGE);
+       EXPORT_SYMBOL_NS(usb_stor_suspend, "USB_STORAGE");
 
 相应的 ksymtab 条目结构体 ``kernel_symbol`` 将有相应的成员 ``命名空间`` 集。
 导出时未指明命名空间的符号将指向 ``NULL`` 。如果没有定义命名空间，则默认没有。
@@ -66,7 +66,7 @@
 子系统的 ``Makefile`` 中定义默认命名空间。例如，如果要将usb-common中定义的所有符号导
 出到USB_COMMON命名空间，可以在drivers/usb/common/Makefile中添加这样一行::
 
-       ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=USB_COMMON
+       ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE='"USB_COMMON"'
 
 这将影响所有 EXPORT_SYMBOL() 和 EXPORT_SYMBOL_GPL() 语句。当这个定义存在时，
 用EXPORT_SYMBOL_NS()导出的符号仍然会被导出到作为命名空间参数传递的命名空间中，
@@ -76,7 +76,7 @@
 成::
 
        #undef  DEFAULT_SYMBOL_NAMESPACE
-       #define DEFAULT_SYMBOL_NAMESPACE USB_COMMON
+       #define DEFAULT_SYMBOL_NAMESPACE "USB_COMMON"
 
 应置于相关编译单元中任何 EXPORT_SYMBOL 宏之前
 
@@ -88,7 +88,7 @@
 表示它所使用的命名空间的符号。例如，一个使用usb_stor_suspend符号的
 模块，需要使用如下语句导入命名空间USB_STORAGE::
 
-       MODULE_IMPORT_NS(USB_STORAGE);
+       MODULE_IMPORT_NS("USB_STORAGE");
 
 这将在模块中为每个导入的命名空间创建一个 ``modinfo`` 标签。这也顺带
 使得可以用modinfo检查模块已导入的命名空间::

Documentation/watchdog/watchdog-parameters.rst

@@ -120,16 +120,6 @@ coh901327_wdt:
 
 -------------------------------------------------
 
-cpu5wdt:
-    port:
-	base address of watchdog card, default is 0x91
-    verbose:
-	be verbose, default is 0 (no)
-    ticks:
-	count down ticks, default is 10000
-
--------------------------------------------------
-
 cpwd:
     wd0_timeout:
 	Default watchdog0 timeout in 1/10secs

MAINTAINERS

@@ -3376,6 +3376,8 @@ S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git
 F:	Documentation/arch/arm64/
 F:	arch/arm64/
+F:	drivers/virt/coco/arm-cca-guest/
+F:	drivers/virt/coco/pkvm-guest/
 F:	tools/testing/selftests/arm64/
 X:	arch/arm64/boot/dts/
 
@@ -16267,6 +16269,7 @@ F:	Documentation/devicetree/bindings/net/
 F:	Documentation/networking/net_cachelines/net_device.rst
 F:	drivers/connector/
 F:	drivers/net/
+F:	drivers/ptp/
 F:	include/dt-bindings/net/
 F:	include/linux/cn_proc.h
 F:	include/linux/etherdevice.h
@@ -22407,7 +22410,7 @@ F:	drivers/char/hw_random/jh7110-trng.c
 
 STARFIVE WATCHDOG DRIVER
 M:	Xingyu Wu <xingyu.wu@starfivetech.com>
-M:	Samin Guo <samin.guo@starfivetech.com>
+M:	Ziv Xu <ziv.xu@starfivetech.com>
 S:	Supported
 F:	Documentation/devicetree/bindings/watchdog/starfive*
 F:	drivers/watchdog/starfive-wdt.c

Makefile

@@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Baby Opossum Posse
 
 # *DOCUMENTATION*

arch/arm/common/locomo.c

@@ -516,7 +516,7 @@ static void locomo_remove(struct platform_device *dev)
  */
 static struct platform_driver locomo_device_driver = {
 	.probe		= locomo_probe,
-	.remove_new	= locomo_remove,
+	.remove		= locomo_remove,
 #ifdef CONFIG_PM
 	.suspend	= locomo_suspend,
 	.resume		= locomo_resume,

arch/arm/common/sa1111.c

@@ -1154,7 +1154,7 @@ static struct dev_pm_ops sa1111_pm_ops = {
  */
 static struct platform_driver sa1111_device_driver = {
 	.probe		= sa1111_probe,
-	.remove_new	= sa1111_remove,
+	.remove		= sa1111_remove,
 	.driver		= {
 		.name	= "sa1111",
 		.pm	= &sa1111_pm_ops,

arch/arm/common/scoop.c

@@ -250,7 +250,7 @@ static void scoop_remove(struct platform_device *pdev)
 
 static struct platform_driver scoop_driver = {
 	.probe		= scoop_probe,
-	.remove_new	= scoop_remove,
+	.remove		= scoop_remove,
 	.suspend	= scoop_suspend,
 	.resume		= scoop_resume,
 	.driver		= {

arch/arm/mach-imx/mmdc.c

@@ -596,7 +596,7 @@ static struct platform_driver imx_mmdc_driver = {
 		.of_match_table = imx_mmdc_dt_ids,
 	},
 	.probe		= imx_mmdc_probe,
-	.remove_new	= imx_mmdc_remove,
+	.remove		= imx_mmdc_remove,
 };
 
 static int __init imx_mmdc_init(void)

arch/arm/mach-omap1/omap-dma.c

@@ -832,7 +832,7 @@ static void omap_system_dma_remove(struct platform_device *pdev)
 
 static struct platform_driver omap_system_dma_driver = {
 	.probe		= omap_system_dma_probe,
-	.remove_new	= omap_system_dma_remove,
+	.remove		= omap_system_dma_remove,
 	.driver		= {
 		.name	= "omap_dma_system"
 	},

arch/arm/mach-pxa/sharpsl_pm.c

@@ -919,7 +919,7 @@ static void sharpsl_pm_remove(struct platform_device *pdev)
 
 static struct platform_driver sharpsl_pm_driver = {
 	.probe		= sharpsl_pm_probe,
-	.remove_new	= sharpsl_pm_remove,
+	.remove		= sharpsl_pm_remove,
 	.suspend	= sharpsl_pm_suspend,
 	.resume		= sharpsl_pm_resume,
 	.driver		= {