arm64: dts: meson: remove extra subnode in mmc clk_gate pinmux

In the pinmux of the mmc clk_gate nodes, we define 2 subnodes. One for
the function definition, the other for the bias. This is not necessary
since we can define the function and the bias in the same subnode.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

arch/arm64/boot/dts/amlogic/meson-axg.dtsi

@@ -310,9 +310,6 @@
 					mux {
 						groups = "BOOT_8";
 						function = "gpio_periphs";
-					};
-					cfg-pull-down {
-						pins = "BOOT_8";
 						bias-pull-down;
 					};
 				};
@@ -543,9 +540,6 @@
 					mux {
 						groups = "GPIOX_4";
 						function = "gpio_periphs";
-					};
-					cfg-pull-down {
-						pins = "GPIOX_4";
 						bias-pull-down;
 					};
 				};

arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi

@@ -377,9 +377,6 @@
 			mux {
 				groups = "BOOT_8";
 				function = "gpio_periphs";
-			};
-			cfg-pull-down {
-				pins = "BOOT_8";
 				bias-pull-down;
 			};
 		};
@@ -426,9 +423,6 @@
 			mux {
 				groups = "CARD_2";
 				function = "gpio_periphs";
-			};
-			cfg-pull-down {
-				pins = "CARD_2";
 				bias-pull-down;
 			};
 		};
@@ -449,9 +443,6 @@
 			mux {
 				groups = "GPIOX_4";
 				function = "gpio_periphs";
-			};
-			cfg-pull-down {
-				pins = "GPIOX_4";
 				bias-pull-down;
 			};
 		};

arch/arm64/boot/dts/amlogic/meson-gxl.dtsi

@@ -324,9 +324,6 @@
 			mux {
 				groups = "BOOT_8";
 				function = "gpio_periphs";
-			};
-			cfg-pull-down {
-				pins = "BOOT_8";
 				bias-pull-down;
 			};
 		};
@@ -373,9 +370,6 @@
 			mux {
 				groups = "CARD_2";
 				function = "gpio_periphs";
-			};
-			cfg-pull-down {
-				pins = "CARD_2";
 				bias-pull-down;
 			};
 		};
@@ -396,9 +390,6 @@
 			mux {
 				groups = "GPIOX_4";
 				function = "gpio_periphs";
-			};
-			cfg-pull-down {
-				pins = "GPIOX_4";
 				bias-pull-down;
 			};
 		};