PCI: v3-semi: Use inbound resources for setup

Now that the helpers provide the inbound resources in the host bridge
'dma_ranges' resource list, convert the v3-semi host bridge to use
the resource list to setup the inbound addresses.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

drivers/pci/controller/pci-v3-semi.c

@@ -598,28 +598,30 @@ static int v3_pci_setup_resource(struct v3_pci *v3,
 }
 
 static int v3_get_dma_range_config(struct v3_pci *v3,
-				   struct of_pci_range *range,
+				   struct resource_entry *entry,
 				   u32 *pci_base, u32 *pci_map)
 {
 	struct device *dev = v3->dev;
-	u64 cpu_end = range->cpu_addr + range->size - 1;
-	u64 pci_end = range->pci_addr + range->size - 1;
+	u64 cpu_addr = entry->res->start;
+	u64 cpu_end = entry->res->end;
+	u64 pci_end = cpu_end - entry->offset;
+	u64 pci_addr = entry->res->start - entry->offset;
 	u32 val;
 
-	if (range->pci_addr & ~V3_PCI_BASE_M_ADR_BASE) {
+	if (pci_addr & ~V3_PCI_BASE_M_ADR_BASE) {
 		dev_err(dev, "illegal range, only PCI bits 31..20 allowed\n");
 		return -EINVAL;
 	}
-	val = ((u32)range->pci_addr) & V3_PCI_BASE_M_ADR_BASE;
+	val = ((u32)pci_addr) & V3_PCI_BASE_M_ADR_BASE;
 	*pci_base = val;
 
-	if (range->cpu_addr & ~V3_PCI_MAP_M_MAP_ADR) {
+	if (cpu_addr & ~V3_PCI_MAP_M_MAP_ADR) {
 		dev_err(dev, "illegal range, only CPU bits 31..20 allowed\n");
 		return -EINVAL;
 	}
-	val = ((u32)range->cpu_addr) & V3_PCI_MAP_M_MAP_ADR;
+	val = ((u32)cpu_addr) & V3_PCI_MAP_M_MAP_ADR;
 
-	switch (range->size) {
+	switch (resource_size(entry->res)) {
 	case SZ_1M:
 		val |= V3_LB_BASE_ADR_SIZE_1MB;
 		break;
@@ -667,8 +669,8 @@ static int v3_get_dma_range_config(struct v3_pci *v3,
 	dev_dbg(dev,
 		"DMA MEM CPU: 0x%016llx -> 0x%016llx => "
 		"PCI: 0x%016llx -> 0x%016llx base %08x map %08x\n",
-		range->cpu_addr, cpu_end,
-		range->pci_addr, pci_end,
+		cpu_addr, cpu_end,
+		pci_addr, pci_end,
 		*pci_base, *pci_map);
 
 	return 0;
@@ -677,24 +679,16 @@ static int v3_get_dma_range_config(struct v3_pci *v3,
 static int v3_pci_parse_map_dma_ranges(struct v3_pci *v3,
 				       struct device_node *np)
 {
-	struct of_pci_range range;
-	struct of_pci_range_parser parser;
+	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(v3);
 	struct device *dev = v3->dev;
+	struct resource_entry *entry;
 	int i = 0;
 
-	if (of_pci_dma_range_parser_init(&parser, np)) {
-		dev_err(dev, "missing dma-ranges property\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * Get the dma-ranges from the device tree
-	 */
-	for_each_of_pci_range(&parser, &range) {
+	resource_list_for_each_entry(entry, &bridge->dma_ranges) {
 		int ret;
 		u32 pci_base, pci_map;
 
-		ret = v3_get_dma_range_config(v3, &range, &pci_base, &pci_map);
+		ret = v3_get_dma_range_config(v3, entry, &pci_base, &pci_map);
 		if (ret)
 			return ret;