hwmon: (lm90) Define status bits

Add bit defines for the status register. And add a function
lm90_is_tripped() which will read status register and return
tripped or not, then lm90_alert can call it directly, and in the
future the IRQ thread also can use it.

[JD: Adjusted to include all the new MAX6696 status flags.]

Signed-off-by: Wei Ni <wni@nvidia.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

drivers/hwmon/lm90.c

@@ -179,6 +179,23 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680,
 #define LM90_HAVE_TEMP3		(1 << 6) /* 3rd temperature sensor	*/
 #define LM90_HAVE_BROKEN_ALERT	(1 << 7) /* Broken alert		*/
 
+/* LM90 status */
+#define LM90_STATUS_LTHRM	(1 << 0) /* local THERM limit tripped */
+#define LM90_STATUS_RTHRM	(1 << 1) /* remote THERM limit tripped */
+#define LM90_STATUS_ROPEN	(1 << 2) /* remote is an open circuit */
+#define LM90_STATUS_RLOW	(1 << 3) /* remote low temp limit tripped */
+#define LM90_STATUS_RHIGH	(1 << 4) /* remote high temp limit tripped */
+#define LM90_STATUS_LLOW	(1 << 5) /* local low temp limit tripped */
+#define LM90_STATUS_LHIGH	(1 << 6) /* local high temp limit tripped */
+
+#define MAX6696_STATUS2_R2THRM	(1 << 1) /* remote2 THERM limit tripped */
+#define MAX6696_STATUS2_R2OPEN	(1 << 2) /* remote2 is an open circuit */
+#define MAX6696_STATUS2_R2LOW	(1 << 3) /* remote2 low temp limit tripped */
+#define MAX6696_STATUS2_R2HIGH	(1 << 4) /* remote2 high temp limit tripped */
+#define MAX6696_STATUS2_ROT2	(1 << 5) /* remote emergency limit tripped */
+#define MAX6696_STATUS2_R2OT2	(1 << 6) /* remote2 emergency limit tripped */
+#define MAX6696_STATUS2_LOT2	(1 << 7) /* local emergency limit tripped */
+
 /*
  * Driver data (common to all clients)
  */
@@ -1391,6 +1408,43 @@ static void lm90_init_client(struct i2c_client *client)
 		i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config);
 }
 
+static bool lm90_is_tripped(struct i2c_client *client, u16 *status)
+{
+	struct lm90_data *data = i2c_get_clientdata(client);
+	u8 st, st2 = 0;
+
+	lm90_read_reg(client, LM90_REG_R_STATUS, &st);
+
+	if (data->kind == max6696)
+		lm90_read_reg(client, MAX6696_REG_R_STATUS2, &st2);
+
+	*status = st | (st2 << 8);
+
+	if ((st & 0x7f) == 0 && (st2 & 0xfe) == 0)
+		return false;
+
+	if ((st & (LM90_STATUS_LLOW | LM90_STATUS_LHIGH | LM90_STATUS_LTHRM)) ||
+	    (st2 & MAX6696_STATUS2_LOT2))
+		dev_warn(&client->dev,
+			 "temp%d out of range, please check!\n", 1);
+	if ((st & (LM90_STATUS_RLOW | LM90_STATUS_RHIGH | LM90_STATUS_RTHRM)) ||
+	    (st2 & MAX6696_STATUS2_ROT2))
+		dev_warn(&client->dev,
+			 "temp%d out of range, please check!\n", 2);
+	if (st & LM90_STATUS_ROPEN)
+		dev_warn(&client->dev,
+			 "temp%d diode open, please check!\n", 2);
+	if (st2 & (MAX6696_STATUS2_R2LOW | MAX6696_STATUS2_R2HIGH |
+		   MAX6696_STATUS2_R2THRM | MAX6696_STATUS2_R2OT2))
+		dev_warn(&client->dev,
+			 "temp%d out of range, please check!\n", 3);
+	if (st2 & MAX6696_STATUS2_R2OPEN)
+		dev_warn(&client->dev,
+			 "temp%d diode open, please check!\n", 3);
+
+	return true;
+}
+
 static int lm90_probe(struct i2c_client *client,
 		      const struct i2c_device_id *id)
 {
@@ -1489,46 +1543,26 @@ static int lm90_remove(struct i2c_client *client)
 
 static void lm90_alert(struct i2c_client *client, unsigned int flag)
 {
-	struct lm90_data *data = i2c_get_clientdata(client);
-	u8 config, alarms, alarms2 = 0;
-
-	lm90_read_reg(client, LM90_REG_R_STATUS, &alarms);
-
-	if (data->kind == max6696)
-		lm90_read_reg(client, MAX6696_REG_R_STATUS2, &alarms2);
-
-	if ((alarms & 0x7f) == 0 && (alarms2 & 0xfe) == 0) {
-		dev_info(&client->dev, "Everything OK\n");
-	} else {
-		if ((alarms & 0x61) || (alarms2 & 0x80))
-			dev_warn(&client->dev,
-				 "temp%d out of range, please check!\n", 1);
-		if ((alarms & 0x1a) || (alarms2 & 0x20))
-			dev_warn(&client->dev,
-				 "temp%d out of range, please check!\n", 2);
-		if (alarms & 0x04)
-			dev_warn(&client->dev,
-				 "temp%d diode open, please check!\n", 2);
-
-		if (alarms2 & 0x5a)
-			dev_warn(&client->dev,
-				 "temp%d out of range, please check!\n", 3);
-		if (alarms2 & 0x04)
-			dev_warn(&client->dev,
-				 "temp%d diode open, please check!\n", 3);
+	u16 alarms;
 
+	if (lm90_is_tripped(client, &alarms)) {
 		/*
 		 * Disable ALERT# output, because these chips don't implement
 		 * SMBus alert correctly; they should only hold the alert line
 		 * low briefly.
 		 */
+		struct lm90_data *data = i2c_get_clientdata(client);
+
 		if ((data->flags & LM90_HAVE_BROKEN_ALERT)
 		 && (alarms & data->alert_alarms)) {
+			u8 config;
 			dev_dbg(&client->dev, "Disabling ALERT#\n");
 			lm90_read_reg(client, LM90_REG_R_CONFIG1, &config);
 			i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1,
 						  config | 0x80);
 		}
+	} else {
+		dev_info(&client->dev, "Everything OK\n");
 	}
 }