net/mlx5: Introducing E-Switch and l2 table

E-Switch is the software entity that represents and manages ConnectX4
inter-HCA ethernet l2 switching.

E-Switch has its own Virtual Ports, each Vport/vNIC/VF can be
connected to the device through a vport of an e-switch.

Each e-switch is managed by one vNIC identified by
HCA_CAP.vport_group_manager (usually it is the PF/vport[0]),
and its main responsibility is to forward each packet to the
right vport.

e-Switch needs to manage its own l2-table and FDB tables.

L2 table is a flow table that is managed by FW, it is needed for
Multi-host (Multi PF) configuration for inter HCA switching between
PFs.

FDB table is a flow table that is totally managed by e-Switch driver,
its main responsibility is to switch packets between e-Swtich internal
vports and uplink vport that belong to the same.

This patch introduces only e-Swtich l2 table management, FDB managemnt
will come later when ethernet SRIOV/VFs will be enabled.

preperation for ethernet sriov and l2 table management.

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/mellanox/mlx5/core/Makefile

@@ -3,6 +3,6 @@ obj-$(CONFIG_MLX5_CORE)		+= mlx5_core.o
 mlx5_core-y :=	main.o cmd.o debugfs.o fw.o eq.o uar.o pagealloc.o \
 		health.o mcg.o cq.o srq.o alloc.o qp.o port.o mr.o pd.o   \
 		mad.o transobj.o vport.o sriov.o
-mlx5_core-$(CONFIG_MLX5_CORE_EN) += wq.o flow_table.o \
+mlx5_core-$(CONFIG_MLX5_CORE_EN) += wq.o flow_table.o eswitch.o \
 		en_main.o en_flow_table.o en_ethtool.o en_tx.o en_rx.o \
 		en_txrx.o

drivers/net/ethernet/mellanox/mlx5/core/eq.c

@@ -35,6 +35,9 @@
 #include <linux/mlx5/driver.h>
 #include <linux/mlx5/cmd.h>
 #include "mlx5_core.h"
+#ifdef CONFIG_MLX5_CORE_EN
+#include "eswitch.h"
+#endif
 
 enum {
 	MLX5_EQE_SIZE		= sizeof(struct mlx5_eqe),
@@ -287,6 +290,11 @@ static int mlx5_eq_int(struct mlx5_core_dev *dev, struct mlx5_eq *eq)
 			break;
 #endif
 
+#ifdef CONFIG_MLX5_CORE_EN
+		case MLX5_EVENT_TYPE_NIC_VPORT_CHANGE:
+			mlx5_eswitch_vport_event(dev->priv.eswitch, eqe);
+			break;
+#endif
 		default:
 			mlx5_core_warn(dev, "Unhandled event 0x%x on EQ 0x%x\n",
 				       eqe->type, eq->eqn);
@@ -459,6 +467,11 @@ int mlx5_start_eqs(struct mlx5_core_dev *dev)
 	if (MLX5_CAP_GEN(dev, pg))
 		async_event_mask |= (1ull << MLX5_EVENT_TYPE_PAGE_FAULT);
 
+	if (MLX5_CAP_GEN(dev, port_type) == MLX5_CAP_PORT_TYPE_ETH &&
+	    MLX5_CAP_GEN(dev, vport_group_manager) &&
+	    mlx5_core_is_pf(dev))
+		async_event_mask |= (1ull << MLX5_EVENT_TYPE_NIC_VPORT_CHANGE);
+
 	err = mlx5_create_map_eq(dev, &table->cmd_eq, MLX5_EQ_VEC_CMD,
 				 MLX5_NUM_CMD_EQE, 1ull << MLX5_EVENT_TYPE_CMD,
 				 "mlx5_cmd_eq", &dev->priv.uuari.uars[0]);