Merge branches 'gpio/merge' and 'spi/merge' of git://git.secretlab.ca…

…/git/linux-2.6 * 'gpio/merge' of git://git.secretlab.ca/git/linux-2.6: gpio: add GPIOF_ values regardless on kconfig settings gpio: include linux/gpio.h where needed gpio/omap4: Fix missing interrupts during device wakeup due to IOPAD. * 'spi/merge' of git://git.secretlab.ca/git/linux-2.6: spi/bfin_spi: fix handling of default bits per word setting
mariux64 · Jun 17, 2011 · 0835619 · 0835619
3 parents add7944 + c001fb7 + e479c60
commit 0835619
Show file tree

Hide file tree

Showing 6 changed files with 20 additions and 15 deletions.
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
@@ -14,6 +14,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>

diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
@@ -469,8 +469,9 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 					+ OMAP24XX_GPIO_CLEARWKUENA);
 		}
 	}
-	/* This part needs to be executed always for OMAP34xx */
-	if (cpu_is_omap34xx() || (bank->non_wakeup_gpios & gpio_bit)) {
+	/* This part needs to be executed always for OMAP{34xx, 44xx} */
+	if (cpu_is_omap34xx() || cpu_is_omap44xx() ||
+			(bank->non_wakeup_gpios & gpio_bit)) {
 		/*
 		 * Log the edge gpio and manually trigger the IRQ
 		 * after resume if the input level changes

diff --git a/drivers/pcmcia/pxa2xx_vpac270.c b/drivers/pcmcia/pxa2xx_vpac270.c
@@ -11,6 +11,7 @@
  *
  */
 
+#include <linux/gpio.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 

diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c
@@ -681,13 +681,14 @@ static void bfin_spi_pump_transfers(unsigned long data)
 	drv_data->cs_change = transfer->cs_change;
 
 	/* Bits per word setup */
-	bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word;
-	if ((bits_per_word > 0) && (bits_per_word % 16 == 0)) {
+	bits_per_word = transfer->bits_per_word ? :
+		message->spi->bits_per_word ? : 8;
+	if (bits_per_word % 16 == 0) {
 		drv_data->n_bytes = bits_per_word/8;
 		drv_data->len = (transfer->len) >> 1;
 		cr_width = BIT_CTL_WORDSIZE;
 		drv_data->ops = &bfin_bfin_spi_transfer_ops_u16;
-	} else if ((bits_per_word > 0) && (bits_per_word % 8 == 0)) {
+	} else if (bits_per_word % 8 == 0) {
 		drv_data->n_bytes = bits_per_word/8;
 		drv_data->len = transfer->len;
 		cr_width = 0;

diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
@@ -170,16 +170,6 @@ extern int __gpio_cansleep(unsigned gpio);
 
 extern int __gpio_to_irq(unsigned gpio);
 
-#define GPIOF_DIR_OUT	(0 << 0)
-#define GPIOF_DIR_IN	(1 << 0)
-
-#define GPIOF_INIT_LOW	(0 << 1)
-#define GPIOF_INIT_HIGH	(1 << 1)
-
-#define GPIOF_IN		(GPIOF_DIR_IN)
-#define GPIOF_OUT_INIT_LOW	(GPIOF_DIR_OUT | GPIOF_INIT_LOW)
-#define GPIOF_OUT_INIT_HIGH	(GPIOF_DIR_OUT | GPIOF_INIT_HIGH)
-
 /**
  * struct gpio - a structure describing a GPIO with configuration
  * @gpio:	the GPIO number

diff --git a/include/linux/gpio.h b/include/linux/gpio.h
@@ -3,6 +3,17 @@
 
 /* see Documentation/gpio.txt */
 
+/* make these flag values available regardless of GPIO kconfig options */
+#define GPIOF_DIR_OUT	(0 << 0)
+#define GPIOF_DIR_IN	(1 << 0)
+
+#define GPIOF_INIT_LOW	(0 << 1)
+#define GPIOF_INIT_HIGH	(1 << 1)
+
+#define GPIOF_IN		(GPIOF_DIR_IN)
+#define GPIOF_OUT_INIT_LOW	(GPIOF_DIR_OUT | GPIOF_INIT_LOW)
+#define GPIOF_OUT_INIT_HIGH	(GPIOF_DIR_OUT | GPIOF_INIT_HIGH)
+
 #ifdef CONFIG_GENERIC_GPIO
 #include <asm/gpio.h>